2SC Compact Two Wire Braid Hose
Compact two-wire-braid hose for high-pressure mobile hydraulics in tight routing scenarios. 1/4" – 1-1/4" (DN6 – DN31).
Key features
- Applicable Standard: EN 857 2SC
- Construction Type: compact-2-wire
- Bore Size Range: 1/4" – 1-1/4" (DN6 – DN31)
- Max Working Pressure: 400 bar
- Min Burst Pressure: 1600 bar
- Min Operating Temperature: -40 °C
- Max Operating Temperature: 100 °C
- Reinforcement: Two layers of high-tensile steel wire braid
- Applicable Standard
- EN 857 2SC
- Construction Type
- compact-2-wire
- Bore Size Range
- 1/4" – 1-1/4" (DN6 – DN31)
- Max Working Pressure
- 400 bar
- Min Burst Pressure
- 1600 bar
- Min Operating Temperature
- -40 °C
Product description
The 2SC Compact Two Wire Braid Hose Compact two-wire-braid hose for high-pressure mobile hydraulics in tight routing scenarios. Conforms to EN 857 2SC.
Construction
- Tube: Synthetic rubber (NBR), oil-resistant
- Reinforcement: Two layers of high-tensile steel wire braid
- Cover: Synthetic rubber, abrasion- and weather-resistant, wrapped
Performance
Working pressures up to 400 bar at -04, falling to 165 bar at -16, with a minimum burst of 1600 bar (safety factor 4:1). Continuous service from -40°C to 100°C, with the upper limit reduced for aggressive fluids — ask for a fluid compatibility chart if needed.
Applications
- High-pressure mobile equipment with tight routing
- Hydraulic attachments on skid-steers and excavators
- Replacement of bulkier R2 2SN where bend radius is critical
Compliance
- EN 857 2SC
Also available in
The same EN 857 2SC grade is stocked in Eaton Winner and Parker Hannifin in addition to the Indus reference shown here. Tell us your brand preference on the RFQ and we will quote accordingly.
Companion grades
For standard EN 853 dimensions see R2 2SN. For higher pressures step up to 4SP / 4SH multi-spiral.
Identification
| Parameter | Value |
|---|---|
| Applicable Standard | EN 857 2SC |
| Construction Type | compact-2-wire |
Dimensions
| Parameter | Value |
|---|---|
| Bore Size Range | 1/4" – 1-1/4" (DN6 – DN31) |
| Min Bend Radius | 50–150 mm by bore (50 mm at -04, 150 mm at -16) |
| Outside Diameter Range | 13.8–36.6 mm (-04 to -16) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 400 bar |
| Min Burst Pressure | 1600 bar |
| Safety Factor | 4:1 |
| Working Pressure Range | 400 bar at -04 down to 165 bar at -16 |
| Min Operating Temperature | -40 °C |
| Max Operating Temperature | 100 °C |
Construction
| Parameter | Value |
|---|---|
| Reinforcement | Two layers of high-tensile steel wire braid |
| Tube (Inner) Material | Synthetic rubber (NBR), oil-resistant |
| Cover Material | Synthetic rubber, abrasion- and weather-resistant |
| Cover Finish | wrapped |
Compliance
| Parameter | Value |
|---|---|
| Conductivity | non-conductive |
Commercial
| Parameter | Value |
|---|---|
| Sold By | per-metre |
Shipping & lead time
What standard does this hose comply with?▾
What is the maximum working pressure?▾
What temperature range is supported?▾
What bore sizes are available?▾
Is this hose conductive?▾
What end fittings are recommended?▾
How is this hose sold?▾
What is the typical lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Maintenance & reliability
Building a hose replacement programme that actually ends unplanned failures
Most fleets replace hoses when they burst. Moving to planned replacement needs three things — a register, a criticality ranking, and an interval that comes from your own data rather than a catalogue.
3 min read
Machine down
Tipper and transit mixer hydraulics: the three hoses that strand a truck
Body-flex, PTO and drum-drive hoses fail in ways that are specific to vehicles that flex and vibrate all day. What goes, why, and the safety step nobody should skip.
3 min read
Assembly, crimping & certification
Hose service in Sharjah, Ajman, Ras Al Khaimah and Fujairah: four different problems
Workshop density in Sharjah, quarry abrasion at Khor Khwair, port and bunkering equipment in Fujairah. Same hose, four failure patterns, four different service answers.
4 min read
Engineers viewing this also looked at
4SH Four-Spiral Heavy-Duty Hydraulic Hose
4SP Four-Spiral Hydraulic Hose
R1 1SC Compact Single Wire Braid Hose
R1 1SN Single Wire Braid Hydraulic Hose
R12 Four-Spiral High-Pressure Hose
R13 Multi-Spiral Very-High-Pressure Hose
R14 PTFE Hydraulic Hose
