R15 Six-Spiral Ultra-High-Pressure Hose

SAE 100R15 six-spiral hose with uniform 420 bar working pressure for ultra-high-pressure hydraulics. 3/8" – 1-1/2" (DN10 – DN38).
Key features
- Applicable Standard: SAE 100R15
- Construction Type: 6-spiral
- Bore Size Range: 3/8" – 1-1/2" (DN10 – DN38)
- Max Working Pressure: 420 bar
- Min Burst Pressure: 1680 bar
- Min Operating Temperature: -40 °C
- Max Operating Temperature: 100 °C
- Reinforcement: Six alternating layers of spiralled steel wire
- Applicable Standard
- SAE 100R15
- Construction Type
- 6-spiral
- Bore Size Range
- 3/8" – 1-1/2" (DN10 – DN38)
- Max Working Pressure
- 420 bar
- Min Burst Pressure
- 1680 bar
- Min Operating Temperature
- -40 °C
Product description
The R15 Six-Spiral Ultra-High-Pressure Hose SAE 100R15 six-spiral hose with uniform 420 bar working pressure for ultra-high-pressure hydraulics. Conforms to SAE 100R15.
Construction
- Tube: Synthetic rubber (NBR), oil-resistant
- Reinforcement: Six alternating layers of spiralled steel wire
- Cover: Synthetic rubber, abrasion-resistant, MSHA-accepted, wrapped
Performance
Working pressures up to 420 bar at the smallest bore, with a minimum burst of 1680 bar (safety factor 4:1). Continuous service from -40°C to 100°C (120°C intermittent), with the upper limit reduced for aggressive fluids — ask for a fluid compatibility chart if needed.
Applications
- Ultra-high-pressure hydraulics on mining and forestry equipment
- Heavy industrial presses and forging machinery
- Specialty hydraulic systems beyond R13 capacity
Compliance
- SAE 100R15
- MSHA-accepted cover
Also available in
The same SAE 100R15 grade is stocked in Eaton Winner and Parker Hannifin in addition to the Indus reference shown here. Tell us your brand preference on the RFQ and we will quote accordingly.
Companion grades
For lower pressure / wider bore range see R13. For 4-spiral premium see EN 856 4SH.
Identification
| Parameter | Value |
|---|---|
| Applicable Standard | SAE 100R15 |
| Construction Type | 6-spiral |
Dimensions
| Parameter | Value |
|---|---|
| Bore Size Range | 3/8" – 1-1/2" (DN10 – DN38) |
| Min Bend Radius | 265–510 mm by bore (265 mm at -12, 510 mm at -24) |
| Outside Diameter Range | 31.8–57.3 mm (-12 to -24) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 420 bar |
| Min Burst Pressure | 1680 bar |
| Working Pressure Range | 420 bar at -12 down to 420 bar at -24 |
| Safety Factor | 4:1 |
| Min Operating Temperature | -40 °C |
| Max Operating Temperature | 100 °C |
Construction
| Parameter | Value |
|---|---|
| Reinforcement | Six alternating layers of spiralled steel wire |
| Tube (Inner) Material | Synthetic rubber (NBR), oil-resistant |
| Cover Material | Synthetic rubber, abrasion-resistant, MSHA-accepted |
| Cover Finish | wrapped |
Compliance
| Parameter | Value |
|---|---|
| Conductivity | non-conductive |
Commercial
| Parameter | Value |
|---|---|
| Sold By | per-metre |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-HS-R15-12
- Supply
- 50 ft pre-cut length
- Hose bore
- -12 · 3/4"
- O.D. (mm)
- 32
- Indus part no.IH-HS-R15-12-COIL
- Supply
- 131 ft coil
- Hose bore
- -12 · 3/4"
- O.D. (mm)
- 32
- Indus part no.IH-HS-R15-16
- Supply
- 50 ft pre-cut length
- Hose bore
- -16 · 1"
- O.D. (mm)
- 38.4
- Indus part no.IH-HS-R15-16-COIL
- Supply
- 131 ft coil
- Hose bore
- -16 · 1"
- O.D. (mm)
- 38.4
- Indus part no.IH-HS-R15-20
- Supply
- 50 ft pre-cut length
- Hose bore
- -20 · 1-1/4"
- O.D. (mm)
- 49.3
- Indus part no.IH-HS-R15-20-COIL
- Supply
- 131 ft coil
- Hose bore
- -20 · 1-1/4"
- O.D. (mm)
- 49.3
- Indus part no.IH-HS-R15-24
- Supply
- 50 ft pre-cut length
- Hose bore
- -24 · 1-1/2"
- O.D. (mm)
- 57.4
- Indus part no.IH-HS-R15-24-COIL
- Supply
- 131 ft coil
- Hose bore
- -24 · 1-1/2"
- O.D. (mm)
- 57.4
Supply — Length and packaging the part number is supplied in, as published. O.D. — Outside diameter of the hose, which is what a clamp or a ferrule has to close on.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is SAE 100R15 hydraulic hose?▾
What do Indus R15 part numbers such as IH-HS-R15-16 mean?▾
Which sizes of SAE 100R15 hose does Indus list?▾
What is the working pressure of SAE 100R15 hose at each size?▾
What is the minimum bend radius of SAE 100R15 hose?▾
What temperature range is SAE 100R15 hose rated for?▾
Which standard does Indus R15 hose conform to?▾
R15 vs 4SH hose: which carries more pressure?▾
Is SAE 100R15 hose used on concrete pumps and other very-high-pressure machines?▾
Which crimp fittings and ferrules are used on SAE 100R15 hose?▾
Where is Indus SAE 100R15 hose made, and can it ship from Dubai?▾
Is SAE 100R15 hose kept in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Machine down
Concrete pumps: the highest-pressure hydraulics on most sites
A truck-mounted pump runs pumping pressures well above ordinary construction plant, on a duty cycle that reverses continuously. Do not confuse the hydraulic hoses with the delivery hose — they are different problems entirely.
3 min read
Specification & standards
SAE 100R types: the numbers are a catalogue, not a ranking
R6 is rated 28 bar. R2AT is rated 400 bar. The higher number is fourteen times weaker. Here is what each SAE 100R designation actually specifies, and why the sequence tells you nothing about strength.
7 min read
Specification & standards
Hydraulic hose: the complete guide to constructions, standards, sizes and pressure
Braid, spiral, compact, thermoplastic and PTFE; SAE 100R against EN 853, 856 and 857; dash sizes and pressure by bore. The hydraulic hose guide, with every figure from the grades we stock.
8 min read





