Hydraulic Jack Hose, 2-Wire Braid, 10,000 psi
Category image · Hoses & FittingsHydraulic Jack Hose, 2-Wire Braid, 10,000 psi: 4 part numbers, 1/4" to 3/8".
Key features
- Application Family: hydraulic jack hose
- Inner Diameter Range: 1/4" to 3/8"
- Operating Temperature: −40 °F to 212 °F (−40 °C to 100 °C)
- Application Family
- hydraulic jack hose
Product description
Two-wire-braid hydraulic hose for hydraulic jacks, rams and hand pumps, rated by the manufacturer at 10,000 psi working pressure in both sizes.
Construction
- Reinforcement: two high-tensile steel wire braids
- Cover: abrasion- and weather-resistant synthetic rubber, stated as MSHA accepted
- Working pressure: 10,000 psi (1/4" and 3/8"), as published
- Hose O.D.: 0.59" (1/4"), 0.75" (3/8")
- Temperature: −40 °F to 212 °F (−40 °C to 100 °C), 248 °F (120 °C) intermittent
Pressure
The manufacturer rates both sizes at 10,000 psi working pressure. End fittings must carry the same rating; tell us the couplings and we will confirm the assembly.
Sizes and supply
4 part numbers, 1/4" to 3/8". Each part number is one size in one supply form; the Sizes & Part Numbers tab lists them.
How to order
Quote the Indus part number, or send the hose bore, the length and the service. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Application Family | hydraulic jack hose |
Dimensions
| Parameter | Value |
|---|---|
| Inner Diameter Range | 1/4" to 3/8" |
Performance
| Parameter | Value |
|---|---|
| Operating Temperature | −40 °F to 212 °F (−40 °C to 100 °C) |
Construction
| Parameter | Value |
|---|---|
| Construction | Reinforcement: two high-tensile steel wire braids; Cover: abrasion- and weather-resistant synthetic rubber, stated as MSHA accepted; Hose O.D.: 0.59" (1/4"), 0.75" (3/8") |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Supply | Hose bore |
|---|---|---|
| IH-HS-4HJK | 50 ft pre-cut length | -04 · 1/4" |
| IH-HS-4HJK-REEL | 500 ft reel | -04 · 1/4" |
| IH-HS-6HJK | 50 ft pre-cut length | -06 · 3/8" |
| IH-HS-6HJK-REEL | 450 ft reel | -06 · 3/8" |
Supply — Length and packaging the part number is supplied in, as published. Ask us for the dimension drawing if you need it stamped.
What pressure is it rated for?▾
What temperature range does it take?▾
Do you sell cut lengths?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Failure analysis
Dirt ingress in transit and storage: what arrives inside a new part
A fitting can be contaminated before anyone opens the bag. What happens to parts over a long sea leg and a longer shelf, and the two minutes that prevent it.
3 min read
GCC conformity & documentation
GCC import documents for hose: Qatar, Oman, Kuwait and Bahrain
Four destinations, four different regimes, and none of them is SABER. What each one asks of a hose consignment, and which questions belong to your customs broker rather than your supplier.
3 min read
Failure analysis
The hose failure post-mortem: eleven questions that stop it recurring
Most hose failures get replaced, not investigated, so the same position fails again next quarter. This is the record that turns a replacement into a fix — eleven fields, five minutes, and no special equipment.
4 min read
Engineers viewing this also looked at
Parker 387TC, 487TC and 787TC Tough Cover Hydraulic Hoses
Enerpac High-Pressure Hydraulic Hoses (H, HA, HB and HC Series)
Enerpac ATEX-Certified 10,000 psi Hose Assemblies
2SC Compact Two Wire Braid Hose
4SH Four-Spiral Heavy-Duty Hydraulic Hose
4SP Four-Spiral Hydraulic Hose
R1 1SC Compact Single Wire Braid Hose
