R2 2SN Double Wire Braid Hydraulic Hose
Two-wire braid medium-to-high-pressure hydraulic hose — the workhorse of general hydraulics. 1/4" – 2" (DN6 – DN51).
Key features
- Applicable Standard: SAE 100R2AT / EN 853 2SN
- Construction Type: 2-wire-braid
- Bore Size Range: 1/4" – 2" (DN6 – DN51)
- Max Working Pressure: 400 bar
- Min Burst Pressure: 1600 bar
- Min Operating Temperature: -40 °C
- Max Operating Temperature: 100 °C
- Reinforcement: Two layers of high-tensile steel wire braid
- Applicable Standard
- SAE 100R2AT / EN 853 2SN
- Construction Type
- 2-wire-braid
- Bore Size Range
- 1/4" – 2" (DN6 – DN51)
- Max Working Pressure
- 400 bar
- Min Burst Pressure
- 1600 bar
- Min Operating Temperature
- -40 °C
Product description
The R2 2SN Double Wire Braid Hydraulic Hose Two-wire braid medium-to-high-pressure hydraulic hose — the workhorse of general hydraulics. Conforms to SAE 100R2AT / EN 853 2SN.
Construction
- Tube: Synthetic rubber (NBR), oil-resistant
- Reinforcement: Two layers of high-tensile steel wire braid
- Cover: Synthetic rubber, abrasion- and weather-resistant, MSHA-accepted, wrapped
Performance
Working pressures up to 400 bar at -04, falling to 80 bar at -32, with a minimum burst of 1600 bar (safety factor 4:1). Continuous service from -40°C to 100°C, with the upper limit reduced for aggressive fluids — ask for a fluid compatibility chart if needed.
Applications
- Mobile hydraulics — construction, agricultural, materials handling
- Hydraulic power units and industrial equipment
- General-purpose hydraulic lines on machine tools
Compliance
- SAE 100R2AT
- EN 853 2SN
- MSHA-accepted cover
Also available in
The same SAE 100R2AT grade is stocked in Eaton Aeroquip and Parker Hannifin in addition to the Eaton Winner reference shown here. Tell us your brand preference on the RFQ and we will quote accordingly.
Companion grades
For higher pressures see R12 / R13 / R15 multi-spiral. For tighter routing see the 2SC compact two-wire equivalent.
Identification
| Parameter | Value |
|---|---|
| Applicable Standard | SAE 100R2AT / EN 853 2SN |
| Construction Type | 2-wire-braid |
Dimensions
| Parameter | Value |
|---|---|
| Bore Size Range | 1/4" – 2" (DN6 – DN51) |
| Min Bend Radius | 100–630 mm by bore (100 mm at -04, 630 mm at -32) |
| Outside Diameter Range | 15–66.7 mm (-04 to -32) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 400 bar |
| Min Burst Pressure | 1600 bar |
| Safety Factor | 4:1 |
| Working Pressure Range | 400 bar at -04 down to 80 bar at -32 |
| Min Operating Temperature | -40 °C |
| Max Operating Temperature | 100 °C |
Construction
| Parameter | Value |
|---|---|
| Reinforcement | Two layers of high-tensile steel wire braid |
| Tube (Inner) Material | Synthetic rubber (NBR), oil-resistant |
| Cover Material | Synthetic rubber, abrasion- and weather-resistant, MSHA-accepted |
| Cover Finish | wrapped |
Compliance
| Parameter | Value |
|---|---|
| Conductivity | non-conductive |
Commercial
| Parameter | Value |
|---|---|
| Sold By | per-metre |
Shipping & lead time
What standard does this hose comply with?▾
What is the maximum working pressure?▾
What temperature range is supported?▾
What bore sizes are available?▾
Is this hose conductive?▾
What end fittings are recommended?▾
How is this hose sold?▾
What is the typical lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Specification & standards
Hydraulic hose pressure by size: why one number per grade misleads you
A grade is not a pressure. 2SN runs 400 bar at −04 and 80 bar at −32 — the same hose, an eightfold difference. Here is the full picture, size by size.
4 min read
Machine down
Backhoe loader: two machines, two entirely different hose problems
The front end is a loader and the back end is an excavator, and they fail in different ways for different reasons. Which end stopped tells you most of what you need before you look at anything.
3 min read
Machine down
Boom lifts and scissor lifts: hoses inside a certified machine
Access equipment carries people. That changes what a hose replacement is — not a repair, but a modification to a machine whose certification assumes it is in the condition it was inspected in.
3 min read
Engineers viewing this also looked at
R3 Two-Fibre Braid Hydraulic Hose
R5 Textile-Cover Single Wire Braid Hose
R6 Single Fibre Braid Low-Pressure Hose
2SC Compact Two Wire Braid Hose
4SH Four-Spiral Heavy-Duty Hydraulic Hose
4SP Four-Spiral Hydraulic Hose
R1 1SC Compact Single Wire Braid Hose
