Skip to content
Lane DXB → TMTürkmenistan

Export from Dubai

TM

Hydraulic & industrial hose supplier in Turkmenistan

Turkmenistan is reached without routing goods through Iran, which shapes everything else on this page. Air freight goes west through Baku and across the Caspian rather than on the direct line, and surface cargo takes the Middle Corridor — Suez, the Black Sea, rail across Georgia and Azerbaijan — then the ferry to Turkmenbashi. Ahead of the freight, foreign-trade contracts are registered with the State Commodity and Raw Materials Exchange, so the contract is settled in its final form before anything is booked.

Typical transit
Typically 4–7 days by air from dispatch
Freight
Air freight via Baku · Middle Corridor by sea, rail and Caspian ferry to Turkmenbashi for volume · No routing through Iran
Incoterms 2020
CIP Ashgabat · DAP to the buyer’s site · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Contract registered with the State Commodity and Raw Materials Exchange · Customs declaration filed by the importer · Certificate of Origin, Dubai Chamber attested · Material and test certificates where the contract calls for them
Fig. 01 · Export lane DXB → TMMercator · WGS 84
UZBEKISTANTURKMENBASHI · PORTASHGABATBALKANABATGARABOGAZMARYTURKMENABATKERKIDASHOGUZ54°E56°E58°E60°E62°E64°E66°E36°N38°N40°N42°NN200 KMAIR · VIA BAKU · 3,710 KM · FROM DUBAI · DXB
Port of entryDelivery cityair · via baku corridor from DUBAI · DXB
Origin
Dubai · DXB
Primary mode
Air, via Baku
Port of entry
Turkmenbashi
Transit
4–7 days by air
Quoted in
USD
Docs prepared
Once the contract is registered
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Turkmenistan prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 26 clusters · 409 ranges

What we supply to Turkmenistan

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 39 Industrial Hoses ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Planetary and slewing gearboxes, wheel drives, winch drives, motorized drums and hydraulic hoisting and recovery winches from Dinamic Oil of Italy, supplied by Indus Hydraulics as authorised distributor, direct from the factory.

Gate, globe, check, ball, butterfly, cryogenic, control and safety valves to API 600, 602, 6D, 594 and 609 and ASME B16.34, NPS 1/2" to 88", Class 150 to 4500.

Pneumatic cylinders, air valves and manifolds, FRL air preparation, tubing, fittings, grippers, vacuum and air motors from Parker, SMC, Wilkerson, Norgren, ARO, Destaco and other makers.

Anchor chain in Grades U1 to U3 and offshore mooring chain in ORQ and R3 to R5, joining shackles and swivels, ship and offshore anchors, chasers, deck fittings and mooring buoys — each size under an Indus part number, supplied from Dubai with class certificates on request.

Finned tubes for air coolers, economisers and fired heaters; seamless carbon, alloy and stainless boiler and heat-exchanger tubes; U-bend tubes; copper, brass and copper-nickel condenser tubes; and the tube sheets, baffles and exchangers they go into. Each size has an Indus part number, with mill test certificates on request.

Export quote · TM

Send the part list for Turkmenistan

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Turkmenistan

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Turkmenistan are declared under.

Freight

Three ways in, priced per shipment

Air freight4–7 days
DXB to ASB, via GYDDefault for most orders
Middle Corridor35–45 days
Poti, rail to Alat, ferry to TurkmenbashiVolume and palletised orders
Caspian project cargo40–55 days
Through Baku by ro-ro ferryOversize and project cargo

Sequence

How an order to Turkmenistan works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once the contract is in its final form, the importer registers it with the State Commodity and Raw Materials Exchange, and we prepare the document set against the registered terms.
  4. 04Goods fly via Baku or take the Middle Corridor, and you get the paperwork and tracking together.

Industries

Who we supply in Turkmenistan

Delivery coverage

Cities and sites we deliver to in Turkmenistan

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

14 locations listed

  • Ashgabat

    Ahal

  • Tejen

    Ahal

  • Turkmenbashi

    Balkan

  • Hazar

    Balkan

  • Balkanabat

    Balkan

  • Garabogaz

    Balkan

  • Serdar

    Balkan

  • Mary

    Mary

  • Bayramaly

    Mary

  • Yoloten

    Mary

  • Turkmenabat

    Lebap

  • Kerki

    Lebap

  • Gazojak

    Lebap

  • Dashoguz

    Dashoguz

Questions we get asked

Supplying Turkmenistan, in detail

01

Do you have a branch in Turkmenistan?

No. Turkmenistan is supplied from our Dubai warehouse, by air via Baku for most orders or by the Middle Corridor to Turkmenbashi for volume.

02

Why not route through Iran?

Because we do not move goods through Iran, by road or by sea. That rules out the shortest surface route, so volume cargo goes the long way round — through Suez, the Black Sea and Georgia to the Caspian — and air freight routes through Baku.

03

What is contract registration?

Foreign-trade contracts are registered with the State Commodity and Raw Materials Exchange before they are performed. Registration fixes the terms, so the part list, prices and Incoterm need to be final before the contract goes in rather than corrected after.

04

Does an EAC certificate work in Turkmenistan?

No. Turkmenistan is not a member of the Eurasian Economic Union, so a certificate issued for a Kazakh or Russian consignee does not carry across. Where a line needs national conformity documents we say so at quotation.

05

How long does delivery to Ashgabat take?

Four to seven days by air from dispatch, via Baku. The Middle Corridor to Turkmenbashi runs five to seven weeks and is quoted per shipment.

06

Can you supply the gas fields?

Yes. API 6A wellhead, API 16C choke and kill and NACE MR0175 rated equipment for sour gas, with material certificates where the contract requires them.

07

Can you deliver to the port at Turkmenbashi?

Yes. Volume and oversize cargo arrives there off the Caspian ferry, and we quote DAP to the port or onward to the site with the inland leg stated.

08

Do you crimp hose assemblies before dispatch?

Yes. Assemblies are crimped and pressure-tested in Dubai and shipped as finished items, tagged with the hose, the fitting and the test date.

From the blog

Guides for buyers in Turkmenistan

Next step

Shipping to Turkmenistan?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · TM

No account needed. We reply from the Dubai export desk.

Other export markets · 136 destinations

We run the same lane from Dubai to 135 other markets

All export markets