4SH Four-Spiral Heavy-Duty Hydraulic Hose

Heavy-gauge four-spiral hose with uniform 420 bar working pressure across the larger-bore range. 3/4" – 2" (DN19 – DN51).
Key features
- Applicable Standard: EN 856 4SH
- Construction Type: 4-spiral
- Bore Size Range: 3/4" – 2" (DN19 – DN51)
- Max Working Pressure: 420 bar
- Min Burst Pressure: 1680 bar
- Min Operating Temperature: -40 °C
- Max Operating Temperature: 100 °C
- Reinforcement: Four alternating layers of high-tensile spiralled steel wire (heavy gauge)
- Applicable Standard
- EN 856 4SH
- Construction Type
- 4-spiral
- Bore Size Range
- 3/4" – 2" (DN19 – DN51)
- Max Working Pressure
- 420 bar
- Min Burst Pressure
- 1680 bar
- Min Operating Temperature
- -40 °C
Product description
The 4SH Four-Spiral Heavy-Duty Hydraulic Hose Heavy-gauge four-spiral hose with uniform 420 bar working pressure across the larger-bore range. Conforms to EN 856 4SH.
Construction
- Tube: Synthetic rubber (NBR), oil-resistant
- Reinforcement: Four alternating layers of high-tensile spiralled steel wire (heavy gauge)
- Cover: Synthetic rubber, abrasion- and weather-resistant, MSHA-accepted, wrapped
Performance
Working pressures up to 420 bar at the smallest bore, with a minimum burst of 1680 bar (safety factor 4:1). Continuous service from -40°C to 100°C, with the upper limit reduced for aggressive fluids — ask for a fluid compatibility chart if needed.
Applications
- Heavy-duty earth-moving and mining equipment
- Large-bore hydraulic press lines
- Industrial hydraulics where uniform high pressure is required at 3/4" and above
Compliance
- EN 856 4SH
- MSHA-accepted cover
Also available in
The same EN 856 4SH grade is stocked in Eaton Winner and Parker Hannifin in addition to the Indus reference shown here. Tell us your brand preference on the RFQ and we will quote accordingly.
Companion grades
For smaller bores at similar pressures see 4SP. For ultra-high-pressure 6-spiral see R15.
Identification
| Parameter | Value |
|---|---|
| Applicable Standard | EN 856 4SH |
| Construction Type | 4-spiral |
Dimensions
| Parameter | Value |
|---|---|
| Bore Size Range | 3/4" – 2" (DN19 – DN51) |
| Min Bend Radius | 280–700 mm by bore (280 mm at -12, 700 mm at -32) |
| Outside Diameter Range | 31.9–68.3 mm (-12 to -32) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 420 bar |
| Min Burst Pressure | 1680 bar |
| Safety Factor | 4:1 |
| Working Pressure Range | 420 bar at -12 down to 250 bar at -32 |
| Min Operating Temperature | -40 °C |
| Max Operating Temperature | 100 °C |
Construction
| Parameter | Value |
|---|---|
| Reinforcement | Four alternating layers of high-tensile spiralled steel wire (heavy gauge) |
| Tube (Inner) Material | Synthetic rubber (NBR), oil-resistant |
| Cover Material | Synthetic rubber, abrasion- and weather-resistant, MSHA-accepted |
| Cover Finish | wrapped |
Compliance
| Parameter | Value |
|---|---|
| Conductivity | non-conductive |
Commercial
| Parameter | Value |
|---|---|
| Sold By | per-metre |
Shipping & lead time
Sizes & part numbers
10 sizes- Indus part no.IH-HS-4SH-12
- Supply
- 50 ft pre-cut length
- Hose bore
- -12 · 3/4"
- O.D. (mm)
- 32.3
- Indus part no.IH-HS-4SH-12-REEL
- Supply
- 150 ft reel
- Hose bore
- -12 · 3/4"
- O.D. (mm)
- 32.3
- Indus part no.IH-HS-4SH-16
- Supply
- 50 ft pre-cut length
- Hose bore
- -16 · 1"
- O.D. (mm)
- 38.6
- Indus part no.IH-HS-4SH-16-REEL
- Supply
- 150 ft reel
- Hose bore
- -16 · 1"
- O.D. (mm)
- 38.6
- Indus part no.IH-HS-4SH-20
- Supply
- 50 ft pre-cut length
- Hose bore
- -20 · 1-1/4"
- O.D. (mm)
- 45.5
- Indus part no.IH-HS-4SH-20-REEL
- Supply
- 131 ft reel
- Hose bore
- -20 · 1-1/4"
- O.D. (mm)
- 45.5
- Indus part no.IH-HS-4SH-24
- Supply
- 50 ft pre-cut length
- Hose bore
- -24 · 1-1/2"
- O.D. (mm)
- 53.6
- Indus part no.IH-HS-4SH-24-REEL
- Supply
- 131 ft reel
- Hose bore
- -24 · 1-1/2"
- O.D. (mm)
- 53.6
Show all 10 sizesShow fewer sizes
- Indus part no.IH-HS-4SH-32
- Supply
- 50 ft pre-cut length
- Hose bore
- -32 · 2"
- O.D. (mm)
- 68.1
- Indus part no.IH-HS-4SH-32-REEL
- Supply
- 131 ft reel
- Hose bore
- -32 · 2"
- O.D. (mm)
- 68.1
Supply — Length and packaging the part number is supplied in, as published. O.D. — Outside diameter of the hose, which is what a clamp or a ferrule has to close on.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is EN 856 4SH heavy-duty four-spiral hose used for?▾
What do the Indus 4SH part numbers such as IH-HS-4SH-16-REEL mean?▾
Which bore sizes and outside diameters is 4SH hose listed in?▾
What is the working pressure of EN 856 4SH hose at each size?▾
What is the minimum bend radius of 4SH hose?▾
What fluids and temperatures is 4SH hose suitable for?▾
Which standard does Indus 4SH hose meet?▾
4SH vs R13 hose: which is better for large bores?▾
Which crimp fittings fit 4SH heavy-duty spiral hose?▾
What should be checked when inspecting a 4SH hose on mining or crane equipment?▾
Where is Indus 4SH hose made, and how is it exported?▾
Is 4SH hose stocked in Dubai for fast delivery?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Machine down
Concrete pumps: the highest-pressure hydraulics on most sites
A truck-mounted pump runs pumping pressures well above ordinary construction plant, on a duty cycle that reverses continuously. Do not confuse the hydraulic hoses with the delivery hose — they are different problems entirely.
3 min read
Machine down
Reach stackers and RTGs: salt air, continuous duty and no downtime window
Port equipment combines the two hardest things: coastal corrosion and a duty cycle that never stops. Neither is an argument for a different hose. Both are arguments for a different regime.
3 min read
Machine down
Mobile crane hoses: the circuits where a failure is a lifting incident
On most machines a hose failure stops work. On a crane, some of them drop a load. Which circuit a hose belongs to decides whether it is a maintenance item or a safety-critical component.
3 min read






