Lane DXB → BW

Export from Dubai

Hydraulic & industrial hose supplier in Botswana

Indus Hydraulics ships hydraulic hose, fittings, valves and industrial hose from Jebel Ali to Botswana by sea to Durban and road to Gaborone, by Walvis Bay and the Trans-Kalahari for the west, or by air via Johannesburg. Botswana is inside the Southern African Customs Union, so a consignment cleared at Durban or Walvis Bay moves on without a second customs entry. Diamonds at Jwaneng and Orapa, copper and coal at Morupule are what the equipment goes to.

Typical transit: 24–32 days via Durban to Gaborone · 26–34 days via Walvis Bay and the Trans-Kalahari · Air freight 6–8 days to Gaborone via Johannesburg
Freight: Sea to Durban then the corridor to Gaborone · Walvis Bay and the Trans-Kalahari as an alternative · Air freight via Johannesburg where the schedule is tighter
Incoterms 2020: DAP Gaborone or the buyer’s site · CIF Durban · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation: SACU customs declaration · Import permit where the product requires one · Certificate of Origin, Dubai Chamber attested

Request an export quote WhatsApp us Email sales@indushydraulics.me

Fig. 01 · Export lane DXB → BWMercator · WGS 84

Border crossingDelivery citysea + road corridor from JEBEL ALI · DXB

Origin: Jebel Ali · Dubai
Primary mode: Sea + road
Border crossing: Tlokweng · Pioneer Gate
Transit: 24–32 days
Quoted in: USD
Docs prepared: Before the vessel sails

Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Botswana prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Botswana

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp

Hoses & Fittings supplier in Botswana

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front

Industrial Hoses supplier in Botswana

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges

A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block

Lifting & Rigging supplier in Botswana

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges

A group of oilfield hoses — a coiled rotary drilling hose with a forged coupling, an armoured flexible line with a flange end and a red hose with a hammer union, a safety clamp in front

Oil & Gas Hoses supplier in Botswana

5 ranges

Specialty hoses for upstream oil & gas — drilling, well control, well service / intervention, tensioner / compensator, and low-pressure oilfield service. Continental ContiTech and Gates.

A group of Molykote lubricant packaging — a steel drum and a plastic pail behind, paste tins, a grease cartridge, two tubs and a sachet arranged in front on a studio backdrop

Lubricants supplier in Botswana

6 ranges

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve

Oilfield Valves supplier in Botswana

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges

A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front

Flow Iron & Wellhead supplier in Botswana

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges

A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body

Valves & Manifolds supplier in Botswana

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front

Blowout Preventers (BOP) supplier in Botswana

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box

Instrumentation & Controls supplier in Botswana

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges

A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid

Well Testing Equipment supplier in Botswana

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges

$A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side$

Fracturing Equipment supplier in Botswana

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges

A skid-mounted cementing unit with twin triplex pumps, mixing and displacement tanks and a control cabin

Cementing Equipment supplier in Botswana

7 ranges

Skid-, trailer- and truck-mounted cementing packages — single & multiplex skid, ATEX/Zone 2, CE & GOST options, automatic density control, data acquisition.

A skid-mounted triplex mud pump with its electric motor, beside a mud manifold of gate valves on a frame

Drilling & Workover Systems supplier in Botswana

7 ranges

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

A skid-mounted stimulation pumping unit with a diesel engine, a triplex pump and a blending tank

Stimulation Equipment supplier in Botswana

5 ranges

Acid / N₂ stimulation packages — nitrogen pumping units, transfer pumps, acid tanks, stimulation batch mixers and pumping units. ATEX, CE, GOST.

A group of hydraulic pumps on a studio backdrop — a variable-displacement axial piston pump with its swashplate control head, an external gear pump, a vane pump cartridge, and a splined drive shaft and cover plate laid in front

Hydraulic Pumps supplier in Botswana

7 ranges

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

A group of hydraulic power-unit accessories — a blue bladder accumulator, a return-line filter housing with its pleated element stood alongside, a perforated suction strainer and a lever ball valve, with O-rings, rod seals, a back-up ring and a wear ring laid in front

Seals & Accessories supplier in Botswana

4 ranges

Hydraulic power unit accessories — HYDAC Betamicron 10 µm pressure and return-line filter elements, and HYDAC SB330 bladder accumulators in 4 and 10 litre sizes for 330 bar.

A group of double-acting hydraulic cylinders — a tie-rod cylinder with its chrome rod part extended, a heavy welded cylinder with a bronze-bushed clevis eye, a short flange-mount cylinder, and a rod eye, mounting bracket and clevis pin in front

Hydraulic Cylinders supplier in Botswana

4 ranges

Double-acting hydraulic cylinders — Bosch Rexroth CDT3 tie-rod cylinders to ISO 6020-2 (160 bar), configured by bore, rod, stroke and mounting, such as 63/45 × 200 mm with clevis mounting and 100/70 × 500 mm with foot mounting.

A group of hydraulic motors — three black orbital motors with SAE A, square and wheel-mount flanges and keyed, tapered and splined shafts, and a cast-iron gear motor, with a splined shaft and O-rings in front

Hydraulic Motors supplier in Botswana

2 ranges

Low-speed high-torque orbital motors and gear motors from Fluidyne, Dynamic Fluid Components, Char-Lynn and Cross, listed by series with every part number.

A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets

Hydraulic Tools & Bolting supplier in Botswana

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Lay flat hose coils in blue, red, yellow and green, a black roll in a steel frame, suction hose, camlock coupling and clamp

Lay Flat Hoses supplier in Botswana

7 ranges

TPU, NBR and PVC lay flat hoses for dewatering, frac water, well risers, fuel, drinking water, concrete and slurry, jacketed fire hose, and suction hose for the pump side.

Export quote · BW

Send the part list for Botswana

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

Standards

Standards we supply and certify against for Botswana

Standard	Types	Applies to
EN 853	1SN · 2SN	Wire-braid hydraulic hose
EN 856	4SP · 4SH	Spiral-wire hydraulic hose
EN 857	1SC · 2SC	Compact wire-braid hose
SAE J517	100R1 · R2 · R12 · R13 · R15	SAE hydraulic hose series
ISO 18752	Grades A–D	Performance-based hose classification
API 16C	Choke & kill	Well control flexible lines
API 7K	Rotary & vibrator	Drilling hose
API 6A	PSL 1–4	Wellhead equipment
DIN 2353	L · S series	Bite-type tube couplings
ISO 8434-1	24° cone	Metric tube connections
ISO 6162 / 12151	Code 61 · 62	SAE flange and hose connections
EN 14420-5	Clamped	Industrial hose couplings
NACE MR0175	ISO 15156	Sour-service materials
ISO 9001:2015	Certified	Quality management system

Customs

Tariff lines we declare under

4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
7307.91Flanges, iron or steelSAE and API flanges
7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
8413.60Rotary positive displacement pumpsGear and vane pumps
8412.21Hydraulic power engines, linear actingCylinders
3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Botswana are declared under.

Freight

Three ways in, priced per shipment

Sea + road, via Durban24–32 days

Corridor to GaboroneDefault for most orders

Air freight6–8 days

DXB to GBE via JohannesburgWhen the line is down

Sea + road, via Walvis Bay26–34 days

Trans-Kalahari corridorWestern deliveries

Sequence

How an order to Botswana works

01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
03Once accepted, the SACU documentation and any import permit are arranged before the container is loaded.
04Goods sail to the chosen port and move inland by road, with the paperwork and tracking together.

Industries

Who we supply in Botswana

mining

Mining in Botswana

Four-spiral hose, slurry valves, high-cycle cylinders and crusher-duty components for diamond mines at Jwaneng, Orapa and Letlhakane, and copper on the Kalahari Copper Belt around Ghanzi.

Industry page

Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath

power

Power & Energy in Botswana

Actuator and governor hydraulics, valves and hose for the Morupule coal-fired stations and colliery near Palapye, and for solar and diesel plant serving remote mines.

Industry page

construction

Construction in Botswana

Excavator, crane and batching-plant hydraulics for road contracts on the Gaborone–Francistown spine and the Trans-Kalahari, and mine-infrastructure works.

Industry page

steel

Steel & Metals in Botswana

High-force cylinders, servo valves and hose for forming and fabrication shops in Gaborone, Francistown and Lobatse that service mine and transport fleets.

Industry page

A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset

oil · gas

Oil & Gas in Botswana

Hose assemblies, loading hose and valves for fuel depots and tanker discharge at Gaborone and Francistown, where suction-rated hose is the specification that matters.

Industry page

A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon

marine

Marine & Offshore in Botswana

Cargo handling hydraulics for inland dry ports and rail terminals on both corridors, including container handling where Durban and Walvis Bay freight is transferred.

Industry page

Delivery coverage

Cities and sites we deliver to in Botswana

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

Gaborone
South-East District
Francistown
North-East District
Jwaneng
Southern District
Orapa
Central District
Selebi-Phikwe
Central District
Maun
North-West District
Ghanzi
Ghanzi District
Palapye
Central District
Morupule
Central District
Lobatse
South-East District
Kasane
North-West District
Tsabong
Kgalagadi District

Questions we get asked

Supplying Botswana, in detail

How long does shipping take from Dubai to Gaborone?

Typically 24 to 32 days by sea to Durban, then road to Gaborone. Via Walvis Bay and the Trans-Kalahari corridor it is 26 to 34 days, often the better choice for the west of the country. Air freight via Johannesburg to Gaborone takes six to eight days. The inland leg to a mine site is quoted rather than estimated.

Does SACU membership help imports into Botswana?

Yes. Botswana is in the Southern African Customs Union, so goods cleared at Durban or Walvis Bay reach it without a second customs entry. That removes a step that costs days on most landlocked lanes, and it is why the decision worth making at quotation is the corridor rather than the paperwork.

Should we ship via Durban or Walvis Bay?

Durban for most orders, including Gaborone, Francistown and the eastern mines. Walvis Bay and the Trans-Kalahari where the delivery is in the west or north-west, such as Ghanzi or Maun. We name the port and corridor in the quotation, and quote DAP Gaborone or your site where you want delivery included.

Which documents are needed to import hydraulic equipment into Botswana?

The formalities are light: a SACU customs declaration lodged by the consignee or clearing agent on arrival, and an import permit only where the product requires one, arranged by the consignee with the ministry before shipment. The goods carry a Certificate of Origin attested by the Dubai Chamber, the bill of lading and packing list, and material certificates where ordered.

Does everything need an import permit in Botswana?

No. Some products do and most do not. We confirm at quotation which lines are affected, so the permit can be arranged before shipment rather than discovered at the border. Sending the complete part list up front is the quickest way to get that answer.

Can you supply and deliver to the diamond mines at Jwaneng and Orapa?

Yes. We supply slurry valves, four-spiral hose, high-cycle cylinders and crusher-duty components, with material certificates where the contract calls for them. Deliveries go DAP to the mine gate at Jwaneng, Orapa or Letlhakane, with the inland leg from Durban or Walvis Bay quoted rather than estimated.

Do you supply the copper mines on the Kalahari Copper Belt?

Yes. Operations around Ghanzi in the north-west use the same duty classes as the diamond mines: abrasion-rated hose, crusher and mill hydraulics, cylinders and slurry valves. For that part of the country, Walvis Bay and the Trans-Kalahari corridor are usually the shorter route, and we quote DAP to the mine gate.

Do you supply Morupule power station and colliery?

Yes. We supply actuators, governor hydraulics, valves and hose for coal-fired generation and for coal mining and handling plant around Palapye. Send nameplate data or existing part numbers; we match the specification and quote the Durban corridor, which is the natural route to the eastern side of the country.

Which hose do we need for dewatering and suction duty?

A suction-rated hose with a helix or rigid reinforcement, not braid alone. A pressure hose fitted to dewatering, recirculation or tanker discharge works briefly, then flattens under vacuum and starves the pump. With water scarce and heavily recycled through Botswana's plants, tell us whether each line pulls as well as pushes and we specify a hose rated for both.

Do you crimp hose assemblies before dispatch to Botswana?

Yes. Assemblies are crimped and pressure-tested in Dubai and shipped as finished items, tagged with the hose, the fittings and the test date. We build to SAE J517, EN 853 and EN 856, or ISO 18752 constructions as specified, so a remote mine receives a ready-to-fit assembly rather than loose components.

How do we request a quotation from Botswana?

Send the part list, quantities, the delivery site and your preferred port if you have one. Quotations are in USD, which keeps the valuation and bank documentation consistent, and name the corridor and Incoterm: DAP Gaborone or your site, CIF Durban, FOB Jebel Ali or EXW Dubai for a nominated forwarder.

Next step

Shipping to Botswana?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp us Email the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · BW

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets

Southern Africa

South Africa NamibiaBotswana — this pageZambia Zimbabwe