Skip to content

Rigging Hardware

269 SKUs

Showing 193–240 of 269 SKUs

Collared Eyebolt — BS 4278 Table 1 — dimension drawing, standard shank

Collared Eyebolt — BS 4278 Table 1, 0.1–20 t WLL

Self colour / electro-galvanized0.1 to 20 t
Inquire
Yellow-chromate clevis slip hook with latch, beside its dimension drawing

Clevis Slip Hook with Latch — Carbon and Alloy, 1/4–1″

1/4″ to 1″alloy 2,750 to 26,500 lbs; carbon 1,950 to 17,600 lbs
Inquire
Yellow-chromate clevis slip hook, H-331 / A-331 pattern, beside its drawing

Clevis Slip Hook — H-331 / A-331 Pattern, 1/4–3/4″

1/4″ to 3/4″alloy 2,750 to 19,250 lbs; carbon 1,950 to 12,500 lbs
Inquire
Yellow-chromate clevis grab hook, H-330 / A-330 pattern, beside its drawing

Clevis Grab Hook — H-330 / A-330 Pattern, 1/4–3/4″

alloy 3,500 to 24,700 lbs; carbon 2,600 to 20,200 lbs1/4″ to 3/4″
Inquire
Bow Nut — BS 3974 — dimension drawing

Bow Nut — BS 3974, 230–7,400 kg WLL

Self colour, electro-galvanized upon request230 to 7,400 kg
Inquire
Category image · Lifting & Rigging
Blank Clevis End Fitting — dimension drawing

Blank Clevis End Fitting — 2–3″

2″ to 3″Self coloured,hot-dip galvanized
Inquire
Bent Hitch Pin — dimension drawing, zinc plated

Bent Hitch Pin — 3/8–3/4″

Electro-galvanized bent pin fastener3/8″ to 3/4″
Inquire
Hamburger Lashing Turnbuckle — dimension drawing

Hamburger Lashing Turnbuckle

Self coloured, electro-galvanized, hot dip galvanizedMild steel
Inquire
Die-Cast Zinc Turnbuckle — dimension drawing, eye and eye

Die-Cast Zinc Turnbuckle

Zinc alloyZinc plated
Inquire
Stainless Steel Double Lock Safety Hook — dimension drawing

Stainless Steel Double Lock Safety Hook

4″Type 304 or 316 stainless steel
Inquire
Stainless Steel Carabiner Snap Hook with Screw Nut — DIN 5299 — dimension drawing

Stainless Steel Carabiner Snap Hook with Screw Nut — DIN 5299

80 to 900 lbsPolished / electrophoretic coating
Inquire
Stainless Steel Carabiner Snap Hook with Eyelet — DIN 5299 — dimension drawing

Stainless Steel Carabiner Snap Hook with Eyelet — DIN 5299

Stainless steel 304/316 carabiner snap hookPolished / electrophoretic coating
Inquire
Shackle — DIN 82101 Form A, B and C Pattern, Galvanized — dimension drawing

Shackle — DIN 82101 Form A, B and C Pattern, Galvanized

Galvanized, powder coating, or self colored
Inquire
Stainless Steel D Ring Thimble — dimension drawing, standard

Stainless Steel D Ring Thimble

Stainless steel 304/316Polished
Inquire
Stainless Steel D Ring — dimension drawing

Stainless Steel D Ring

Type 304 or 316 stainless steelPolished
Inquire
Zinc-plated repair link, open hooked link for joining chain

Repair Link — Zinc Plated

1/8″ × 3/4″ to 1/2″ × 2-1/2″Zinc plated
Inquire
Stainless Steel Swivel Locking Snap Hook — dimension drawing

Stainless Steel Swivel Locking Snap Hook

Type 304 or type 316 stainless steelPolished
Inquire
Stainless Steel Quick Release Snap Shackle with Round Swivel Ring — dimension drawing

Stainless Steel Quick Release Snap Shackle with Round Swivel Ring

Type 304 or 316 stainless steel eye swivel snap shackle270 to 340 kg
Inquire
Stainless Steel Pelican Hook — dimension drawing, inside thread

Stainless Steel Pelican Hook

PolishedType 304 or 316 stainless steel eye swivel snap shackle
Inquire
Wire Lock Pin — Stainless Steel — dimension drawing, round wire

Wire Lock Pin — Stainless Steel

PolishedStainless steel AISI304.Carbon steel zinc plated is also available
Inquire
Wire Lock Pin — Galvanized — dimension drawing, round wire

Wire Lock Pin — Galvanized

Carbon steel stainless steel AISI304 or AISI316 is also availableElectro-galvanized
Inquire
Hitch Pin with Lynch Pin and Chain — Zinc Plated — dimension drawing

Hitch Pin with Lynch Pin and Chain — Zinc Plated

Carbon steelElectro-galvanized(yellow zinc plater)
Inquire
Coil Tension Snap Pin — dimension drawing, zinc plated

Coil Tension Snap Pin

Electro-galvanizedMild steelstainless steel AISI304 is also available
Inquire
Grade 80 Swivel Lifting Screw Point — dimension drawing

Grade 80 Swivel Lifting Screw Point

Powder coatedG80 lifting point made of alloy steel
Inquire
Black Coated Strap Staple — dimension drawing

Black Coated Strap Staple

Black coatedCarbon steel
Inquire
Eye Sling Hook with Triangle Ring — dimension drawing

Eye Sling Hook with Triangle Ring

Carbon steelHot dipped galvanized / zinc plated
Inquire
Red 320-pattern eye hoist hook with safety latch, beside its drawing

Eye Hoist Hook with Latch — 320 Pattern

1/4 t to 32 mmalloy 0.5 to 22 t; carbon 0.25 to 15 t; grade 1.12 to 31.5 t
Inquire
Red 320-pattern eye hoist hook, beside its dimension drawing

Eye Hoist Hook — 320 Pattern

alloy 0.5 to 22 t; carbon 0.25 to 15 t1/4 t to 22 t
Inquire
Clevis Grab Hook with Latch — Grade 43 and Grade 70 — dimension drawing, grade 43

Clevis Grab Hook with Latch — Grade 43 and Grade 70

Carbon steelPowder coated / hot dipped galvanized / zinc plated / self colour
Inquire
Clevis Grab Hook, Grade 70 — AS/NZS 4344 — dimension drawing, no wing

Clevis Grab Hook, Grade 70 — AS/NZS 4344

Alloy steelSelf colour, zinc plated
Inquire
Stainless Steel Ezi Hold Dee Ring — dimension drawing, cast

Stainless Steel Ezi Hold Dee Ring

Stainless steel 304/316Polished
Inquire

Questions we get asked

About this range

01Which shackle do I need — anchor (bow) or chain (dee)?
A chain (dee) shackle is for a straight, in-line pull. An anchor (bow) shackle has a rounder body that accepts more than one sling or a pull at an angle to the pin. For a permanent or long-term installation choose a bolt-type shackle, whose nut and cotter pin cannot unscrew in service; a screw-pin shackle suits rigging that is made and broken often.
02What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04Which rigging hardware is not meant for overhead lifting?
Anything without a published working load limit for lifting. On this shelf that typically includes cold shut and repair links, S hooks, most snap hooks and quick links, lag screw and wire-turned eye bolts, DIN 444 swing bolts, strap staples and lashing D rings, and commercial-grade shackles. These are made for fencing, lashing, light connecting and general duty. If a product page gives no WLL, or gives a lashing capacity instead, treat the item as not rated for lifting and use a rated shackle, hook, master link or lifting point instead.
05Can I mix US-pattern and European-pattern fittings in one rig?
Yes, provided every component is rated for the load it carries and the parts fit each other properly. Patterns differ in dimensions, so check the fit: a shackle pin must pass through a hook eye or lifting point without forcing, a master link must sit freely in the crane hook bowl, and no fitting should bear on another's tip or bind at an angle. The assembly is only as strong as its lowest-rated component, so rate the rig on that one, not on the heaviest part.
06Stainless, galvanised or alloy rigging hardware — which should I use?
Choose on rating first, then on environment. Grade 8 alloy fittings carry the highest rating for their size and suit heavy lifting; galvanised carbon steel is the general choice outdoors; stainless suits splash zones, food plant and architectural rigging where rust staining is unacceptable. Do not assume a stainless or galvanised part has the same WLL as an alloy part of the same nominal size — ratings are set by each maker for each material, and the size table on the product page shows them as separate rows.
07What are the types of rigging hardware?
The range covers G-209, G-213 and G-2130 pattern shackles, 320 and 331 pattern hooks, DIN 580 and JIS B 1168 eye bolts, master links, swivels and turnbuckles. Snap hooks, quick links, lifting points and pad eyes are also listed.
08What is rigging hardware used for?
Rigging hardware is the forged, cast and stainless fittings that join slings, chain and wire rope to a hook, a load or an anchor point. Indus supplies it from Dubai, UAE.