Collared Eyebolt — BS 4278 Table 1

Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Made to BS 4278. High tensile steel 1045, self colour / electro-galvanized.

Sizes and ratings

30 sizes, M6 to M64. Working load limit 0.1 to 20 t. Available as: standard shank, long shank. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.

The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.

Manufacturer's data

• Forged + machining + quenched and tempered.

Choosing a size

The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.

Ordering

Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.