Clevis Slip Hook with Latch — Carbon and Alloy
Clevis Slip Hook with Latch, in 8 sizes, 1/4″ to 1″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Clevis Slip Hook with Latch
- Size range: 1/4″ to 1″
- Working load limit: alloy 2,750 to 26,500 lbs; carbon 1,950 to 17,600 lbs
- Size range
- 1/4″ to 1″
- Working load limit
- alloy 2,750 to 26,500 lbs; carbon 1,950 to 17,600 lbs
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain.
Sizes and ratings
8 sizes, 1/4″ to 1″. Working load limit alloy 2,750 to 26,500 lbs; carbon 1,950 to 17,600 lbs. Carbon- and alloy-steel versions share a frame but not a rating, so each is its own row in the table. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 4 times the working load limit (a 4:1 design factor).
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Clevis Slip Hook with Latch |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 1″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | alloy 2,750 to 26,500 lbs; carbon 1,950 to 17,600 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
16 sizes| Indus part no. | Size | Grade | WLL (lbs) | B (mm) | E (mm) | P (mm) | R (mm) | T (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-HK-CSL-025-C | 1/4″ | Carbon steel | 1,950 | 11.2 | 20.1 | 9.7 | 65 | 20.1 | 0.52 |
| IH-LR-HK-CSL-025-A | 1/4″ | Alloy steel | 2,750 | 11.2 | 20.1 | 9.7 | 65 | 20.1 | 0.52 |
| IH-LR-HK-CSL-031-C | 5/16″ | Carbon steel | 2,870 | 12.7 | 23.6 | 11.2 | 72.9 | 20.1 | 0.77 |
| IH-LR-HK-CSL-031-A | 5/16″ | Alloy steel | 4,300 | 12.7 | 23.6 | 11.2 | 72.9 | 20.1 | 0.77 |
| IH-LR-HK-CSL-038-C | 3/8″ | Carbon steel | 4,000 | 15 | 29 | 11.9 | 82.5 | 25.9 | 1.23 |
| IH-LR-HK-CSL-038-A | 3/8″ | Alloy steel | 5,250 | 15 | 29 | 11.9 | 82.5 | 25.9 | 1.23 |
| IH-LR-HK-CSL-044-C | 7/16″ | Carbon steel | 5,000 | 16.8 | 30 | 14.2 | 94 | 26.9 | 2.1 |
| IH-LR-HK-CSL-044-A | 7/16″ | Alloy steel | 7,000 | 16.8 | 30 | 14.2 | 94 | 26.9 | 2.1 |
| IH-LR-HK-CSL-050-C | 1/2″ | Carbon steel | 6,500 | 19 | 36.1 | 16 | 101.6 | 35.1 | 2.85 |
| IH-LR-HK-CSL-050-A | 1/2″ | Alloy steel | 9,000 | 19 | 36.1 | 16 | 101.6 | 35.1 | 2.85 |
| IH-LR-HK-CSL-062-C | 5/8″ | Carbon steel | 9,250 | 23.1 | 41.9 | 19 | 125.5 | 42.9 | 5.18 |
| IH-LR-HK-CSL-062-A | 5/8″ | Alloy steel | 12,500 | 23.1 | 41.9 | 19 | 125.5 | 42.9 | 5.18 |
| IH-LR-HK-CSL-075-C | 3/4″ | Carbon steel | 12,500 | 33.3 | 46 | 25.4 | 154.7 | 46 | 10.45 |
| IH-LR-HK-CSL-075-A | 3/4″ | Alloy steel | 19,200 | 33.3 | 46 | 25.4 | 154.7 | 46 | 10.45 |
| IH-LR-HK-CSL-100-C | 1″ | Carbon steel | 17,600 | 35.1 | 50.3 | 29 | 188 | 63.5 | 13.65 |
| IH-LR-HK-CSL-100-A | 1″ | Alloy steel | 26,500 | 35.1 | 50.3 | 29 | 188 | 63.5 | 13.65 |
Size — Nominal size as the manufacturer states it. Grade — Material grade of this row — carbon and alloy versions share a frame but not a rating. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. B — Dimension B on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. P — Dimension P on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. T — Dimension T on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the clevis slip hook with latch come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Eye Bend Hook, Forged Alloy — Type A
Stainless Steel Eye Slip Hook with Latch
Eye Sling Hook with Triangle Ring
Eye Twist Hook (Reverse Eye Hook)
Forged Eye Snap Hook with Safety Latch
Grade 80 Clevis Container Hook
Grade 80 Container Hook
