Hamburger Lashing Turnbuckle
Hamburger Lashing Turnbuckle, in 14 sizes. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Hamburger Lashing Turnbuckle
- Material
- Mild steel
- Finish
- Self coloured, electro-galvanized, hot dip galvanized
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Mild steel, self coloured, electro-galvanized, hot dip galvanized.
Sizes and ratings
14 sizes. Minimum breaking load 13 to 30 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Hamburger Lashing Turnbuckle |
| Sizes | 14 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 13 to 30 t |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Self coloured, electro-galvanized, hot dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
14 sizes| Indus part no. | Size | Min breaking load (t) | A (mm) | B (mm) | C (mm) | D (mm) | H (mm) | M (mm) | R1 (mm) | R2 (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-TB-HLT-M24X400MM | M24 × 400 mm | 13 | 400 | 75 | 35 | 210 | 22 | 24 | 615 | 20 | 2.9 |
| IH-LR-TB-HLT-M24X400MM-2 | M24 × 400 mm | 18 | 400 | 75 | 35 | 210 | 36 | 24 | 15 | 20 | 2.9 |
| IH-LR-TB-HLT-M24X500MM | M24 × 500 mm | 13 | 500 | 75 | 35 | 260 | 22 | 24 | 15 | 20 | 3.4 |
| IH-LR-TB-HLT-M24X500MM-2 | M24 × 500 mm | 18 | 500 | 75 | 35 | 260 | 36 | 24 | 15 | 20 | 3.4 |
| IH-LR-TB-HLT-M27X400MM | M27 × 400 mm | 20 | 400 | 75 | 35 | 210 | 33 | 27 | 17.5 | 21.5 | 4 |
| IH-LR-TB-HLT-M27X400MM-2 | M27 × 400 mm | 25 | 400 | 75 | 35 | 210 | 42 | 27 | 17.5 | 21.5 | 4 |
| IH-LR-TB-HLT-M27X500MM | M27 × 500 mm | 20 | 500 | 75 | 35 | 260 | 33 | 27 | 17.5 | 21.5 | 4.6 |
| IH-LR-TB-HLT-M27X500MM-2 | M27 × 500 mm | 25 | 500 | 75 | 35 | 260 | 42 | 27 | 17.5 | 21.5 | 4.6 |
| IH-LR-TB-HLT-M30X400MM | M30 × 400 mm | — | 400 | 75 | 35 | 210 | — | 30 | 17.5 | 25.5 | 4.5 |
| IH-LR-TB-HLT-M30X400MM-2 | M30 × 400 mm | 25 | 400 | 75 | 35 | 210 | 45 | 30 | 17.5 | 25.5 | 4.5 |
| IH-LR-TB-HLT-M30X500MM | M30 × 500 mm | — | 500 | 75 | 35 | 260 | — | 30 | 17.5 | 25.5 | 5.5 |
| IH-LR-TB-HLT-M30X500MM-2 | M30 × 500 mm | 25 | 500 | 75 | 35 | 260 | 45 | 30 | 17.5 | 25.5 | 5.5 |
| IH-LR-TB-HLT-M38X480MM | M38 × 480 mm | 30 | 480 | 80 | 35 | 255 | 40 | 38 | 20 | 28 | 7.6 |
| IH-LR-TB-HLT-M38X480MM-2 | M38 × 480 mm | — | 480 | 80 | 35 | — | — | 38 | — | — | 9 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. R1 — Dimension R1 on the manufacturer dimension drawing. R2 — Dimension R2 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the hamburger lashing turnbuckle come in?▾
Why do hook-end turnbuckles have a lower WLL?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Turnbuckle — Italian Type
JIS Frame Turnbuckle, Eye and Hook
Rigging Screw, Jaw and Jaw
Stainless Steel DIN 1480 Turnbuckle
Stainless Steel Drop Forged Turnbuckle — US Type
Stainless Steel Rigging Screw, Jaw and Jaw
Stainless Steel Rigging Screw — Swage and Fork Ends
