Stainless Steel Carbine Hook with Eyelet and Screw Nut — DIN 5299
Stainless Steel Carbine Hook with Eyelet and Screw Nut (DIN 5299), in 10 sizes, WLL 100 to 900 lbs. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Carbine Hook with Eyelet and Screw Nut
- Pattern / standard: DIN 5299
- Working load limit: 100 to 900 lbs
- Working load limit
- 100 to 900 lbs
- Finish
- Polished / electrophoretic coating
Product description
Stainless Steel Carbine Hook with Eyelet and Screw Nut for tension, lashing and fixing duty. Built to the DIN 5299 pattern. Polished / electrophoretic coating.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
10 sizes. Working load limit 100 to 900 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping / machining.
Choosing a size
Use them within their published WLL, which is light, and close a screw-lock gate fully before loading. For lifting loads use rated shackles, hooks and master links.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Carbine Hook with Eyelet and Screw Nut |
| Pattern / standard | DIN 5299 |
| Sizes | 10 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 100 to 900 lbs |
Construction
| Parameter | Value |
|---|---|
| Finish | Polished / electrophoretic coating |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Size | WLL (lbs) | A (mm) | C (mm) | D (mm) | D1 (mm) |
|---|---|---|---|---|---|---|
| IH-LR-SN-SSCHESND5-5X50 | 5×50 | 100 | 50 | 7 | 5 | 6.5 |
| IH-LR-SN-SSCHESND5-6X60 | 6×60 | 140 | 60 | 8 | 6 | 7.5 |
| IH-LR-SN-SSCHESND5-7X70 | 7×70 | 200 | 70 | 8 | 7 | 9 |
| IH-LR-SN-SSCHESND5-8X80 | 8×80 | 250 | 80 | 9 | 8 | 10 |
| IH-LR-SN-SSCHESND5-9X90 | 9×90 | 280 | 90 | 10 | 9 | 11 |
| IH-LR-SN-SSCHESND5-10X100 | 10×100 | 400 | 100 | 12 | 10 | 13 |
| IH-LR-SN-SSCHESND5-11X120 | 11×120 | 500 | 120 | 16 | 11 | 15 |
| IH-LR-SN-SSCHESND5-12X140 | 12×140 | 600 | 140 | 19 | 12 | 18 |
| IH-LR-SN-SSCHESND5-13X160 | 13×160 | 700 | 160 | 25 | 13 | 20 |
| IH-LR-SN-SSCHESND5-14X180 | 14×180 | 900 | 180 | 35 | 14 | 20 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel carbine hook with eyelet and screw nut come in?▾
Can it be used for lifting?▾
Are snap hooks and quick links for overhead lifting?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Carabiner Snap Hook with Eyelet — DIN 5299
Stainless Steel Double Lock Safety Hook
Stainless Steel G Hook — Egg Type
Stainless Steel Long Arm S Hook
Stainless Steel Long Quick Link
Stainless Steel Quick Link
Stainless Steel Repair Lap Link
