Stainless Steel Trigger Snap Shackle — Universal Eye

Stainless Steel Trigger Snap Shackle, in 1 size, 4300 kg. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Trigger Snap Shackle
- Size range: 4300 kg
- Size range
- 4300 kg
- Finish
- Polished
Product description
Stainless Steel Trigger Snap Shackle for tension, lashing and fixing duty. Polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
1 size, 4300 kg. Minimum breaking load 8,700 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Trigger Snap Shackle |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 4300 kg |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 8,700 kg |
Construction
| Parameter | Value |
|---|---|
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-LR-SH-SSSHRTSSU-4300KG
- Size
- 4300 kg
- Min breaking load (kg)
- 8,700
- A (mm)
- 26
- B (mm)
- 27
- C (mm)
- 32
- Weight (kg)
- 0.326
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Stainless Steel Trigger Snap Shackle — Universal Eye used for?▾
Which sizes of Stainless Steel Trigger Snap Shackle — Universal Eye are available?▾
How do I choose the right size of Stainless Steel Trigger Snap Shackle — Universal Eye?▾
What is the breaking load of the Stainless Steel Trigger Snap Shackle — Universal Eye?▾
What part number do I quote for the Stainless Steel Trigger Snap Shackle — Universal Eye?▾
How does the Stainless Steel Trigger Snap Shackle — Universal Eye compare with the Stainless Steel Fixed Snap Shackle?▾
What material and finish does the Stainless Steel Trigger Snap Shackle — Universal Eye have?▾
Which standard does the Stainless Steel Trigger Snap Shackle — Universal Eye meet?▾
What does the Stainless Steel Trigger Snap Shackle — Universal Eye connect with?▾
How should the Stainless Steel Trigger Snap Shackle — Universal Eye be inspected and used?▾
What are the typical applications of the Stainless Steel Trigger Snap Shackle — Universal Eye?▾
Does Indus stock the Stainless Steel Trigger Snap Shackle — Universal Eye in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
How to spot counterfeit and non-conforming rigging hardware
Counterfeit shackles and hooks have turned up on job sites in Africa, Europe and the US — sometimes sold through legitimate suppliers who were themselves deceived. They look right until you read the markings closely. The red flags investigators and industry alerts have found, a receiving check that catches most fakes, and what to do when you find one.
4 min read
Lifting & rigging
Types of shackles: anchor vs chain, and screw pin vs bolt type vs round pin
A shackle is chosen on two decisions: the body shape, which sets the directions it can be loaded from, and the pin, which sets how securely it stays closed. Here is how anchor and chain shackles differ, when each pin type is right, and how material changes the rating at the same size.
10 min read
Lifting & rigging
Buying shackles for a UAE or GCC project: what to put on the purchase order
Most shackle problems on site start at the purchase order: a size with no pattern, a pattern with no pin type, a rating nobody checked, a certificate nobody asked for. A buyer’s guide for contractors in the UAE and the Gulf — pattern, pin, grade, size, finish, certificate and delivery — and the six lines every shackle order should carry.
5 min read








