Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch
Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch, in 1 size, 5.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch
- Size range: 5.3 t
- Working load limit: 5.3 t
- Size range
- 5.3 t
- Working load limit
- 5.3 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Alloy steel, powder coated.
Sizes and ratings
1 size, 5.3 t. Working load limit 5.3 t. Minimum breaking load 21.2 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5.3 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 5.3 t |
| Minimum breaking load | 21.2 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | WLL (t) | Min breaking load (t) | A (mm) | B (mm) | C (mm) | H (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-HK-G80CSHCCL-5P3T | 5.3 t | 5.3 | 21.2 | 15.5 | 60 | 71.5 | 104 | 195 | 1.9 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 clevis skip hook with container clevis link and gated catch come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
J Hook with Oval Eye
Lifting Eye Hook with Latch — DIN 689
Stainless Steel Large Eye Hook with Latch
R Hook — Carbon and Alloy
Round Reverse Eye Hook
Stainless Steel Clevis Grab Hook
Stainless Steel Clevis Slip Hook with Safety Latch
