Clevis Grab Hook, Grade 70 — AS/NZS 4344

Clevis Grab Hook, Grade 70 (AS/NZS 4344), in 8 sizes, LC 2,300 to 9,000 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Clevis Grab Hook, Grade 70
- Pattern / standard: AS/NZS 4344
- Material
- Alloy steel
- Finish
- Self colour, zinc plated
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Made to AS/NZS 4344. Alloy steel, self colour, zinc plated.
Sizes and ratings
8 sizes. Lashing capacity 2,300 to 9,000 kg. Minimum breaking load 4,600 to 18,000 kg. Available as: no wing, with wing. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Drop forged, quenched and tempered.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Clevis Grab Hook, Grade 70 |
| Pattern / standard | AS/NZS 4344 |
| Sizes | 8 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 4,600 to 18,000 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Self colour, zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-LR-HK-CGH70ASN4-6MM-NW
- Size
- 6 mm
- Type
- No wing
- Min breaking load (kg)
- 4,600
- LC (kg)
- 2,300
- A (mm)
- 9.5
- B (mm)
- 26
- E (mm)
- 9.5
- L (mm)
- 83
- Weight (kg)
- 0.23
- Indus part no.IH-LR-HK-CGH70ASN4-8MM-NW
- Size
- 8 mm
- Type
- No wing
- Min breaking load (kg)
- 7,600
- LC (kg)
- 3,800
- A (mm)
- 12
- B (mm)
- 35
- E (mm)
- 12
- L (mm)
- 99
- Weight (kg)
- 0.38
- Indus part no.IH-LR-HK-CGH70ASN4-10MM-NW
- Size
- 10 mm
- Type
- No wing
- Min breaking load (kg)
- 12,000
- LC (kg)
- 6,000
- A (mm)
- 13.5
- B (mm)
- 36
- E (mm)
- 13.5
- L (mm)
- 115
- Weight (kg)
- 0.62
- Indus part no.IH-LR-HK-CGH70ASN4-13MM-NW
- Size
- 13 mm
- Type
- No wing
- Min breaking load (kg)
- 18,000
- LC (kg)
- 9,000
- A (mm)
- 18
- B (mm)
- 48.5
- E (mm)
- 18
- L (mm)
- 152
- Weight (kg)
- 1.24
- Indus part no.IH-LR-HK-CGH70ASN4-2300KG-W
- Size
- 2300 kg
- Type
- With wing
- Min breaking load (kg)
- 4,600
- LC (kg)
- 2,300
- A (mm)
- 9.5
- B (mm)
- 26
- E (mm)
- 9.5
- L (mm)
- 83
- Weight (kg)
- 0.21
- Indus part no.IH-LR-HK-CGH70ASN4-3800KG-W
- Size
- 3800 kg
- Type
- With wing
- Min breaking load (kg)
- 7,600
- LC (kg)
- 3,800
- A (mm)
- 12
- B (mm)
- 35
- E (mm)
- 12
- L (mm)
- 99
- Weight (kg)
- 0.35
- Indus part no.IH-LR-HK-CGH70ASN4-6000KG-W
- Size
- 6000 kg
- Type
- With wing
- Min breaking load (kg)
- 12,000
- LC (kg)
- 6,000
- A (mm)
- 13.5
- B (mm)
- 36
- E (mm)
- 13.5
- L (mm)
- 115
- Weight (kg)
- 0.57
- Indus part no.IH-LR-HK-CGH70ASN4-9000KG-W
- Size
- 9000 kg
- Type
- With wing
- Min breaking load (kg)
- 18,000
- LC (kg)
- 9,000
- A (mm)
- 18
- B (mm)
- 48.5
- E (mm)
- 18
- L (mm)
- 152
- Weight (kg)
- 1.25
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. LC — Lashing capacity — the most a tie-down may hold in service when securing a load (EN 12195). A load-securing figure, not a lifting rating. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
LC is the lashing capacity — what a tie-down may hold when securing a load under EN 12195. It is not a lifting rating: never lift with load-securing equipment.
What is the Clevis Grab Hook, Grade 70 — AS/NZS 4344 and what is it used for?▾
How are the Indus part numbers for the Clevis Grab Hook, Grade 70 — AS/NZS 4344 structured?▾
What sizes does the Clevis Grab Hook, Grade 70 — AS/NZS 4344 come in?▾
How do I choose the right size of Clevis Grab Hook, Grade 70 — AS/NZS 4344?▾
What load rating does the Clevis Grab Hook, Grade 70 — AS/NZS 4344 have?▾
What is the Clevis Grab Hook, Grade 70 — AS/NZS 4344 made from?▾
Does the Clevis Grab Hook, Grade 70 — AS/NZS 4344 come with a test certificate?▾
What should the Clevis Grab Hook, Grade 70 — AS/NZS 4344 be used with?▾
How should the Clevis Grab Hook, Grade 70 — AS/NZS 4344 be inspected and used safely?▾
Where is the Clevis Grab Hook, Grade 70 — AS/NZS 4344 typically used?▾
How does the Clevis Grab Hook, Grade 70 — AS/NZS 4344 differ from the Clevis Grab Hook — H-330 / A-330 Pattern?▾
Do you stock the Clevis Grab Hook, Grade 70 — AS/NZS 4344 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting hook types: eye, clevis and swivel hooks, sling vs grab hooks, and latches
Hooks are chosen on two things: how they attach (eye, clevis, shank or swivel) and what they do (a sling or slip hook holds a load in its bowl; a grab hook grips a chain link). Use a grab hook to shorten a chain and the sling loses 20% unless the hook is a cradle type. Here is how the types differ, and when a hook comes out of service.
6 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read
Lifting & rigging
Stainless steel lifting chain: Grade 60 ratings, where it is worth it, and its limits
Stainless steel chain lifts where galvanised alloy chain would rust or contaminate: food plants, water treatment, marine and offshore. It carries less than Grade 80 at the same size, and chlorides in warm air can crack it. Ratings from our Grade 60 table, where stainless is worth it, which stainless chain to avoid for lifting, and how to look after it.
3 min read








