Stainless Steel Pelican Hook
Stainless Steel Pelican Hook, in 4 sizes. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Pelican Hook
- Material
- Type 304 or 316 stainless steel eye swivel snap shackle
- Finish
- Polished
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. Type 304 or 316 stainless steel eye swivel snap shackle, polished.
Sizes
4 sizes. Available as: inside thread, with eye. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Cast.
Choosing a size
A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Pelican Hook |
| Sizes | 4 |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or 316 stainless steel eye swivel snap shackle |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | Type | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-SH-SSPH-M6-IT | M6 | Inside thread | 77.5 | 14 | 11 | — | — | — | 0.068 |
| IH-LR-SH-SSPH-M8-IT | M8 | Inside thread | 104 | 16 | 13.5 | — | — | — | 0.131 |
| IH-LR-SH-SSPH-M10-IT | M10 | Inside thread | 126 | 19 | 15.5 | — | — | — | 0.216 |
| IH-LR-SH-SSPH-400-E | 4″ | With eye | 100 | 20 | 10 | 9 | 4.5 | 23 | 0.09 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel pelican hook come in?▾
What do G-209, G-2130 and G-213 mean?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Quick Release Snap Shackle with Round Swivel Ring
Stainless Steel Shackle — European Type, Screw Pin
Stainless Steel Trigger Snap Shackle — Universal Eye
Stainless Steel Screw Pin Shackle — Long and Wide Dee
Stainless Steel Shackle — Square Head Pin
Stainless Steel Swivel Snap Shackle
Stainless Steel Twist Shackle — Screw Pin
