Bent Hitch Pin — 3/8–3/4″

Bent Hitch Pin, in 6 sizes, 3/8″ to 3/4″. Indus part numbers.
Key features
- Product type: Bent Hitch Pin
- Size range: 3/8″ to 3/4″
- Size range
- 3/8″ to 3/4″
- Finish
- Electro-galvanized bent pin fastener
Product description
Retaining pins that keep a clevis pin, bolt or hitch pin in place. Electro-galvanized bent pin fastener.
Sizes
6 sizes, 3/8″ to 3/4″. Available as: zinc plated — 1/2 / hith pin clip, zinc plated — 3/4 / hith pin clip, zinc plated — 3/8 / hith pin clip, zinc plated — 5/8 / hith pin clip, stainless steel — lynch pin. Every size has its own Indus part number in the table below.
Manufacturer's data
- Stamped.
Choosing a size
Size the pin to the hole it passes through and the pin it retains. These retainers do not carry the load; replace one that is bent or has lost its spring.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Bent Hitch Pin |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/8″ to 3/4″ |
Construction
| Parameter | Value |
|---|---|
| Finish | Electro-galvanized bent pin fastener |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-RP-BHP-050-ZP—12
- Size
- 1/2″
- Type
- Zinc plated — 1/2 / hith pin clip
- Usable length (mm)
- 3
- Indus part no.IH-LR-RP-BHP-075-ZP—34
- Size
- 3/4″
- Type
- Zinc plated — 3/4 / hith pin clip
- Usable length (mm)
- 3.5
- Indus part no.IH-LR-RP-BHP-038-ZP—38
- Size
- 3/8″
- Type
- Zinc plated — 3/8 / hith pin clip
- Usable length (mm)
- 3
- Indus part no.IH-LR-RP-BHP-062-ZP—58
- Size
- 5/8″
- Type
- Zinc plated — 5/8 / hith pin clip
- Usable length (mm)
- 3
- Indus part no.IH-LR-RP-BHP-050-SS—LP
- Size
- 1/2″
- Type
- Stainless steel — lynch pin
- Usable length (mm)
- 3
- Indus part no.IH-LR-RP-BHP-062-SS—LP
- Size
- 5/8″
- Type
- Stainless steel — lynch pin
- Usable length (mm)
- 3
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Usable length — Length of pin available to pass through the parts. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Bent Hitch Pin and what is it used for?▾
What sizes does the Bent Hitch Pin come in?▾
How do I size the Bent Hitch Pin for a job?▾
What load can the Bent Hitch Pin carry?▾
How do I order a specific size of the Bent Hitch Pin?▾
How does the Bent Hitch Pin compare with the Lynch Pin?▾
What is the Bent Hitch Pin made of?▾
What standard and certificate come with the Bent Hitch Pin?▾
What can the Bent Hitch Pin be connected to?▾
How do I inspect the Bent Hitch Pin before use?▾
Where is the Bent Hitch Pin typically used?▾
Does Indus stock the Bent Hitch Pin in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





