Stainless Steel Welded Eye Wire Support with Tube Thimble

Stainless Steel Welded Eye Wire Support with Tube Thimble, in 1 size, Rope Dia.:8-10 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Welded Eye Wire Support with Tube Thimble
- Size range: Rope Dia.:8-10 mm
- Size range
- Rope Dia.:8-10 mm
- Material
- Stainless steel 304/316
- Finish
- Polished
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Stainless steel 304/316, polished.
Sizes
1 size, Rope Dia.:8-10 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Welded Eye Wire Support with Tube Thimble |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | Rope Dia.:8-10 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304/316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-LR-RL-WETTWSSS-ROPEDIAP8-10MM
- Size
- Rope Dia.:8-10 mm
- A (mm)
- 65
- B (mm)
- 68
- C (mm)
- 16
- D (mm)
- 11
- Weight (kg)
- 0.11
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the stainless steel welded eye wire support with tube thimble and what sizes does it come in?▾
How do I read the Indus part number on the stainless steel welded eye wire support with tube thimble?▾
Which sizes of the stainless steel welded eye wire support with tube thimble are listed, and what do they weigh?▾
How do I choose the right size of stainless steel welded eye wire support with tube thimble?▾
What working load limit does the stainless steel welded eye wire support with tube thimble have?▾
What is the stainless steel welded eye wire support with tube thimble made of, and how is it finished?▾
Which standard or certificate applies to the stainless steel welded eye wire support with tube thimble?▾
What does the stainless steel welded eye wire support with tube thimble connect to?▾
How should the stainless steel welded eye wire support with tube thimble be inspected before use?▾
Where is the stainless steel welded eye wire support with tube thimble used?▾
welded eye wire support compared with the D-ring wire support?▾
Do you stock the stainless steel welded eye wire support with tube thimble, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting swivels explained: positioning swivels, bearing swivels and swivel hooks
A swivel stops rigging twisting, but most swivels are not designed to turn while they carry the load. Regular eye and jaw swivels, bearing swivels that are built to rotate under load, swivel hooks of both kinds, and why a swivel is chosen by its rating, not by the size stamped on it.
3 min read
Lifting & rigging
Snap hooks and quick links: ratings, gates and where not to use them
A 10 mm quick link on our listings is rated 2,640 lbs; a 10 mm Grade 80 chain sling leg, 3.15 tonnes. How quick links and snap hooks are rated, why the gate decides their strength, and why they are not overhead lifting hardware.
6 min read
Lifting & rigging
Master links explained: single links, assemblies with sub-links, and sizing to the hook
The master link is the top of a multi-leg sling: it gathers the legs and sits in the crane hook. Two legs can share a single master link; three or four need an assembly with sub-links. And the link has to fit the hook as well as the chain. Here is how to choose one.
5 min read








