Stainless Steel D Ring Thimble
Stainless Steel D Ring Thimble, in 9 sizes. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel D Ring Thimble
- Material
- Stainless steel 304/316
- Finish
- Polished
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Stainless steel 304/316, polished.
Sizes and ratings
9 sizes. Minimum breaking load 1,800 to 2,800 kg. Available as: standard, with eye, cast, two eyes. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Cast/welding.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel D Ring Thimble |
| Sizes | 9 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 1,800 to 2,800 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304/316 |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Type | Rope size | Min breaking load (kg) | A (mm) | D (mm) | H (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-RL-SSDRT-6X30-S | 6×30 | Standard | Up to 5mm | — | 30 | 6 | 13 | — | — |
| IH-LR-RL-SSDRT-6X50-S | 6×50 | Standard | Up to 5mm | — | 50 | 6 | 15 | — | — |
| IH-LR-RL-SSDRT-8X50-S | 8×50 | Standard | Up to 6mm | — | 50 | 8 | 18 | — | — |
| IH-LR-RL-SSDRT-10X65-S | 10×65 | Standard | UP to 10mm | — | 65 | 10 | 24 | — | — |
| IH-LR-RL-SSDRT-6X50MM-E | 6X50 mm | With eye | 6mm | 1,800 | 50 | 6 | 10 | — | — |
| IH-LR-RL-SSDRT-8X50MM-E | 8x50 mm | With eye | 6mm | 2,800 | 50 | 8 | 10 | — | — |
| IH-LR-RL-SSDRT-TAKESUPTO5MMWIREROPE-CTE | takes up to 5 mm wire rope | Cast, two eyes | — | — | 51 | 5.5 | — | 55 | 0.06 |
| IH-LR-RL-SSDRT-TAKESUPTO6MMWIREROPE-CTE | takes up to 6 mm wire rope | Cast, two eyes | — | — | 52 | 8.5 | — | 62 | 0.1 |
| IH-LR-RL-SSDRT-TAKESUPTO8MMWIREROPE-CTE | takes up to 8 mm wire rope | Cast, two eyes | — | — | 55 | 10.5 | — | 68 | 0.17 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Rope size — Rope diameter the sheave is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel d ring thimble come in?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Ezi Hold Dee Ring
Stainless Steel Flexible Swivel
Stainless Steel Jaw End Swivel — G-403 Pattern
Stainless Steel Round Ring (O Ring)
Stainless Steel Regular Swivel — G-402 Pattern
Stainless Steel Swivel — Bow Type
Stainless Steel Swivel — D Type
