Eye Sling Hook with Triangle Ring
Eye Sling Hook with Triangle Ring, in 1 size, 2″. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Eye Sling Hook with Triangle Ring
- Size range: 2″
- Size range
- 2″
- Material
- Carbon steel
- Finish
- Hot dipped galvanized / zinc plated
Product description
Eye Sling Hook with Triangle Ring for tension, lashing and fixing duty. Carbon steel, hot dipped galvanized / zinc plated.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
1 size, 2″. Minimum breaking load 5 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Eye Sling Hook with Triangle Ring |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 5 t |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Hot dipped galvanized / zinc plated |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | Min breaking load (t) | A (mm) | D (mm) | K (mm) | L (mm) | N (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-HK-ESHTR-200 | 2″ | 5 | 60 | 12.7 | 111 | 164 | 29 | 0.512 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. N — Dimension N on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the eye sling hook with triangle ring come in?▾
Can it be used for lifting?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Eye Twist Hook (Reverse Eye Hook)
Forged Eye Snap Hook with Safety Latch
Grade 80 Clevis Container Hook
Grade 80 Container Hook
Grade 80 Container Lifting Clevis Link
Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch
J Hook with Oval Eye
