Stainless Steel Ezi Hold Dee Ring
Stainless Steel Ezi Hold Dee Ring, in 6 sizes. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Ezi Hold Dee Ring
- Material
- Stainless steel 304/316
- Finish
- Polished
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Stainless steel 304/316, polished.
Sizes
6 sizes. Available as: cast, with pipe. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Cast.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Ezi Hold Dee Ring |
| Sizes | 6 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304/316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
6 sizes| Indus part no. | Size | Type | Rope size | A (mm) | D (mm) | D1 (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-RL-SSEHDR-TAKESUPTO5MMWIREROPE-C | takes up to 5 mm wire rope | Cast | — | 51 | 5.5 | — | 55 | 0.06 |
| IH-LR-RL-SSEHDR-TAKESUPTO6MMWIREROPE-C | takes up to 6 mm wire rope | Cast | — | 52 | 8.5 | — | 62 | 0.1 |
| IH-LR-RL-SSEHDR-TAKESUPTO8MMWIREROPE-C | takes up to 8 mm wire rope | Cast | — | 53 | 10 | — | 62 | 0.101 |
| IH-LR-RL-SSEHDR-TAKESUPTO10MMWIREROPE-C | takes up to 10 mm wire rope | Cast | — | 55 | 11 | — | 69 | 0.167 |
| IH-LR-RL-SSEHDR-5X50-P | 5X50 | With pipe | Up to 5mm | 51 | — | 9 | 55 | — |
| IH-LR-RL-SSEHDR-8X50-P | 8X50 | With pipe | Up to 8mm | 52 | — | 13 | 62 | — |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Rope size — Rope diameter the sheave is made for. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel ezi hold dee ring come in?▾
Can a swivel rotate under load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Flexible Swivel
Stainless Steel Jaw End Swivel — G-403 Pattern
Stainless Steel Round Ring (O Ring)
Stainless Steel Regular Swivel — G-402 Pattern
Stainless Steel Swivel — Bow Type
Stainless Steel Swivel — D Type
Stainless Steel Triangle Delta Ring
