Skip to content

Rigging Hardware

269 SKUs

Showing 97–144 of 269 SKUs

Square Eye Snap Hook — dimension drawing

Square Eye Snap Hook — 30–180 kg WLL

Type 304 or type 316 stainless steelPolished
Inquire
Hot-dip galvanized shoulder nut eye bolt with collar

Shoulder Nut Eye Bolt, Hot-Dip Galvanized — 650–24,000 lbs WLL

650 to 24,000 lbs1/4″ × 2″ to 1-1/2″ × 15″
Inquire
Shoulder machinery eye bolt with collar and short threaded shank

Shoulder Machinery Eye Bolt — 650–24,000 lbs WLL

1/4″ × 1″ to 1-1/2″ × 3-1/2″650 to 24,000 lbs
Inquire
S Hook with Safety Latch — dimension drawing

S Hook with Safety Latch — 750–1,250 lbs WLL

750 to 1,250 lbsZinc plated / galvanized / self coloured
Inquire
Hot-dip galvanized regular nut eye bolt, long threaded shank with nut

Regular Nut Eye Bolt, Hot-Dip Galvanized — 650–21,000 lbs WLL

1/4″ × 2″ to 1-1/4″ × 20″Forged carbon steel
Inquire
Rectangular Base Deck Eye Plate — dimension drawing

Rectangular Base Deck Eye Plate — 45–229 mm

Self-colour finishHigh tensile steel C1045
Inquire
Quick Release Snap Hook — dimension drawing

Quick Release Snap Hook — 35 mm

PolishedType 304 or type 316 stainless steel
Inquire
Pear Shaped Spring Snap Hook — dimension drawing

Pear Shaped Spring Snap Hook — 100–600 lbs WLL

100 to 600 lbsMild steel pear shaped spring snap hook
Inquire
Pear Shaped Quick Link — Galvanized — dimension drawing

Pear Shaped Quick Link — Galvanized, 120–1,650 lbs WLL

120 to 1,650 lbsElectro-galvanized (zinc plated) / hot-dip galvanized
Inquire
Oval Snap Hook with Screw Nut — dimension drawing

Oval Snap Hook with Screw Nut — 100–500 lbs WLL

100 to 500 lbsMild steel oval snap hook
Inquire
Oval Snap Hook (Carbine Hook) — dimension drawing

Oval Snap Hook (Carbine Hook) — 100–500 lbs WLL

Electro-galvanized (zinc plated)100 to 500 lbs
Inquire
Lynch Pin — dimension drawing, zinc plated

Lynch Pin — 4.4–10.4 mm

Carbon steel4.4 mm to 10.4 mm
Inquire
Long Quick Link — Galvanized — dimension drawing

Long Quick Link — Galvanized, 175–2,800 lbs WLL

175 to 2,800 lbsMild steel, type 304 or type 316 stainless steel is also available
Inquire
Cast galvanized cleat (jaw end swivel listing)

Jaw End Swivel — 850–45,200 lbs WLL

850 to 45,200 lbs1/4″ to 1-1/2″
Inquire

Questions we get asked

About this range

01Which shackle do I need — anchor (bow) or chain (dee)?
A chain (dee) shackle is for a straight, in-line pull. An anchor (bow) shackle has a rounder body that accepts more than one sling or a pull at an angle to the pin. For a permanent or long-term installation choose a bolt-type shackle, whose nut and cotter pin cannot unscrew in service; a screw-pin shackle suits rigging that is made and broken often.
02What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04Which rigging hardware is not meant for overhead lifting?
Anything without a published working load limit for lifting. On this shelf that typically includes cold shut and repair links, S hooks, most snap hooks and quick links, lag screw and wire-turned eye bolts, DIN 444 swing bolts, strap staples and lashing D rings, and commercial-grade shackles. These are made for fencing, lashing, light connecting and general duty. If a product page gives no WLL, or gives a lashing capacity instead, treat the item as not rated for lifting and use a rated shackle, hook, master link or lifting point instead.
05Can I mix US-pattern and European-pattern fittings in one rig?
Yes, provided every component is rated for the load it carries and the parts fit each other properly. Patterns differ in dimensions, so check the fit: a shackle pin must pass through a hook eye or lifting point without forcing, a master link must sit freely in the crane hook bowl, and no fitting should bear on another's tip or bind at an angle. The assembly is only as strong as its lowest-rated component, so rate the rig on that one, not on the heaviest part.
06Stainless, galvanised or alloy rigging hardware — which should I use?
Choose on rating first, then on environment. Grade 8 alloy fittings carry the highest rating for their size and suit heavy lifting; galvanised carbon steel is the general choice outdoors; stainless suits splash zones, food plant and architectural rigging where rust staining is unacceptable. Do not assume a stainless or galvanised part has the same WLL as an alloy part of the same nominal size — ratings are set by each maker for each material, and the size table on the product page shows them as separate rows.
07What are the types of rigging hardware?
The range covers G-209, G-213 and G-2130 pattern shackles, 320 and 331 pattern hooks, DIN 580 and JIS B 1168 eye bolts, master links, swivels and turnbuckles. Snap hooks, quick links, lifting points and pad eyes are also listed.
08What is rigging hardware used for?
Rigging hardware is the forged, cast and stainless fittings that join slings, chain and wire rope to a hook, a load or an anchor point. Indus supplies it from Dubai, UAE.