Skip to content

Lifting & Rigging

801 SKUs

Showing 625–672 of 801 SKUs

Category image · Lifting & Rigging

Wire Rope and Cable Grip 0.5Ton 1Ton 2Ton 3Ton

Sperior alloy steelColor zinc plated(yellow chromate)
Inquire
Stainless Steel Wire Rope Clip — JIS Type — dimension drawing

Stainless Steel Wire Rope Clip — JIS Type

Type 304 or 316 stainless steelPolished
Inquire
Stainless Steel Duplex Wire Rope Clip — dimension drawing, standard

Stainless Steel Duplex Wire Rope Clip

PolishedStainless steel 304 or 316 (A2 or A4)
Inquire
Simplex Wire Rope Clip, Zinc Plated — dimension drawing

Simplex Wire Rope Clip, Zinc Plated

Low carbon steelElectric galvanized
Inquire
Duplex Wire Rope Clip, Zinc Plated — dimension drawing

Duplex Wire Rope Clip, Zinc Plated

Electro-galvanizedLow carbon steel
Inquire
Drop Forged Wire Rope Clip — Italian Type — dimension drawing

Drop Forged Wire Rope Clip — Italian Type

Electro-galvanized, hot dip galvanized, powder coated or dacromet
Inquire
Deka Malleable Wire Rope Clip, Galvanized — dimension drawing

Deka Malleable Wire Rope Clip, Galvanized

Malleable ironElectro-galvanized
Inquire
Toothed wheel (sprocket) for DIN 764 chain, six teeth and keyed bore

Toothed Wheel for DIN 764 Chain

Cast or forged steel, teeth hardened10 × 35 mm to 18 × 63 mm chain
Inquire
Segmented plain wheel for bucket elevator chain, bolted rim segments on a four-arm hub

Segmented Plain Wheel for Bucket Elevator Chain

Ø 450 mm to Ø 800 mmSteel; replaceable hardened rim segments
Inquire
Segmented plain rim wheel for bucket elevator chain, bolted wear segments on a spoked hub

Segmented Plain Rim Wheel for Bucket Elevator Chain

Steel; replaceable hardened rim segments in pairsØ 630 mm to Ø 1250 mm
Inquire
Round Link Mining Chain, DIN 22252

Round Link Mining Chain — DIN 22252

Alloy steel (e.g. 23MnNiCrMo54), quenched and tempered14 × 50 mm to 42 × 146 mm
Inquire
Red pocket wheel (chain sprocket) for DIN 764 round link chain

Pocket Wheel for DIN 764 Chain

Cast or forged steel, pockets hardened10 × 35 mm to 23 × 80 mm chain
Inquire
One-piece cast plain wheel for bucket elevator chain, spoked with central hub

One-Piece Plain Wheel for Bucket Elevator Chain

MachinedSteel, wear surface hardened
Inquire
Flat Link Mining Chain, DIN 22255

Flat Link Mining Chain — DIN 22255

26 × 92 mm to 42 × 146 mmAlloy steel, quenched and tempered
Inquire
Block Connecting Link for Mining Chain, DIN 22258-1 — dimension drawing

Block Connecting Link for Mining Chain — DIN 22258-1

Forged alloy steel, heat treatedSelf-colour or painted
Inquire
Stainless Steel D Ring Thimble — dimension drawing, standard

Stainless Steel D Ring Thimble

Stainless steel 304/316Polished
Inquire
Stainless Steel D Ring — dimension drawing

Stainless Steel D Ring

Type 304 or 316 stainless steelPolished
Inquire
Zinc-plated repair link, open hooked link for joining chain

Repair Link — Zinc Plated

1/8″ × 3/4″ to 1/2″ × 2-1/2″Zinc plated
Inquire
Stainless Steel Swivel Locking Snap Hook — dimension drawing

Stainless Steel Swivel Locking Snap Hook

Type 304 or type 316 stainless steelPolished
Inquire
Stainless Steel Quick Release Snap Shackle with Round Swivel Ring — dimension drawing

Stainless Steel Quick Release Snap Shackle with Round Swivel Ring

Type 304 or 316 stainless steel eye swivel snap shackle270 to 340 kg
Inquire
Stainless Steel Pelican Hook — dimension drawing, inside thread

Stainless Steel Pelican Hook

PolishedType 304 or 316 stainless steel eye swivel snap shackle
Inquire
Wire Lock Pin — Stainless Steel — dimension drawing, round wire

Wire Lock Pin — Stainless Steel

PolishedStainless steel AISI304.Carbon steel zinc plated is also available
Inquire
Wire Lock Pin — Galvanized — dimension drawing, round wire

Wire Lock Pin — Galvanized

Carbon steel stainless steel AISI304 or AISI316 is also availableElectro-galvanized
Inquire
Hitch Pin with Lynch Pin and Chain — Zinc Plated — dimension drawing

Hitch Pin with Lynch Pin and Chain — Zinc Plated

Carbon steelElectro-galvanized(yellow zinc plater)
Inquire
Coil Tension Snap Pin — dimension drawing, zinc plated

Coil Tension Snap Pin

Electro-galvanizedMild steelstainless steel AISI304 is also available
Inquire
Grade 80 Swivel Lifting Screw Point — dimension drawing

Grade 80 Swivel Lifting Screw Point

Powder coatedG80 lifting point made of alloy steel
Inquire
Black Coated Strap Staple — dimension drawing

Black Coated Strap Staple

Black coatedCarbon steel
Inquire
Eye Sling Hook with Triangle Ring — dimension drawing

Eye Sling Hook with Triangle Ring

Carbon steelHot dipped galvanized / zinc plated
Inquire
Red 320-pattern eye hoist hook with safety latch, beside its drawing

Eye Hoist Hook with Latch — 320 Pattern

1/4 t to 32 mmalloy 0.5 to 22 t; carbon 0.25 to 15 t; grade 1.12 to 31.5 t
Inquire
Red 320-pattern eye hoist hook, beside its dimension drawing

Eye Hoist Hook — 320 Pattern

alloy 0.5 to 22 t; carbon 0.25 to 15 t1/4 t to 22 t
Inquire
Clevis Grab Hook with Latch — Grade 43 and Grade 70 — dimension drawing, grade 43

Clevis Grab Hook with Latch — Grade 43 and Grade 70

Carbon steelPowder coated / hot dipped galvanized / zinc plated / self colour
Inquire
Clevis Grab Hook, Grade 70 — AS/NZS 4344 — dimension drawing, no wing

Clevis Grab Hook, Grade 70 — AS/NZS 4344

Alloy steelSelf colour, zinc plated
Inquire

Questions we get asked

About this range

01What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
02Can Grade 30, 43 or 70 chain be used for lifting?
No. Proof coil (Grade 30), high test (Grade 43) and transport (Grade 70) chain are made for tie-down, towing and general duty. Overhead lifting with chain calls for alloy chain — Grade 80 or Grade 100 — with fittings of the same grade.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04How do I read an Indus lifting part number?
IH-LR, then the family code, then the size. Inch sizes are written in hundredths of an inch (075 is 3/4″, 025X200 is 1/4″ × 2″), metric sizes in millimetres (10MM, M16), and capacities in tonnes (0T5 is 0.5 t). A trailing -C or -A marks the carbon-steel and alloy-steel versions of the same hook or link.
05How often must lifting equipment be thoroughly examined in the UAE?
It depends on the emirate and on whether the item is lifting equipment or a lifting accessory. In Abu Dhabi, Code of Practice 34.0 requires a thorough examination of lifting equipment every 12 months, and of lifting accessories and equipment for lifting people every 6 months, by a QCC-approved third party. In Dubai, Municipality guideline GU48 requires certification every 12 months by an EIAC-accredited third party, and EIAC's own requirements set 6-month intervals for accessories, manual equipment and people-lifting equipment. Daily and pre-use checks by the user apply everywhere, and an accessory without a legible WLL marking comes out of service.
06How much does the sling angle reduce what each leg can carry?
The flatter the sling, the more load each leg carries. Measured from the horizontal, a leg at 90° carries its share of the load; at 60° it carries about 1.15 times that share, at 45° about 1.41 times and at 30° twice as much. Most lifting standards do not allow angles flatter than 30° from horizontal. Size every component — sling, shackle, master link and lifting point — for the tension in the worst-loaded leg, not for the weight of the load divided by the number of legs.
07Grade 80 or Grade 100 alloy chain — which should I choose?
Both are alloy lifting chain rated at a 4:1 design factor. Grade 100 carries about 25% more working load than Grade 80 of the same size, so a smaller, lighter sling does the same lift. Grade 80 is the more widely used and stocked, and manufacturers generally allow it at higher service temperatures than Grade 100 — check the derating table for hot work. Whichever grade you choose, the fittings must be rated for it: a Grade 80 fitting sets the capacity of a Grade 100 sling.
08Can I send a full rigging list for one quotation?
Yes. Send the list with the WLL, size, quantity and any certification each line needs, and we quote it line by line under IH-LR part numbers, with the manufacturer's rating against each item. Where a manufacturer does not publish a WLL for a part, or a line is ambiguous — a shackle pattern, a chain grade or a sling length — we say so on the quotation rather than guess.