Duplex Wire Rope Clip, Zinc Plated
Duplex Wire Rope Clip, Zinc Plated, in 7 sizes. Indus part numbers.
Key features
- Product type: Duplex Wire Rope Clip, Zinc Plated
- Material
- Low carbon steel
- Finish
- Electro-galvanized
Product description
Wire rope clips form an eye or join two ropes without a swaging press. Low carbon steel, electro-galvanized.
Sizes
7 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamp.
Choosing a size
Drop-forged clips are the ones used on lifting terminations; malleable clips are for guy lines and non-lifting duty. Fit the saddle on the live end, use the number of clips the maker specifies for the rope size, and re-torque after the first load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Duplex Wire Rope Clip, Zinc Plated |
| Sizes | 7 |
Construction
| Parameter | Value |
|---|---|
| Material | Low carbon steel |
| Finish | Electro-galvanized |
Shipping & lead time
Sizes & part numbers
7 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | E (mm) | F (mm) | G (mm) | I (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-WC-DWRCZP-M4 | M4 (2 mm) | 38 | 12 | 5 | 7.5 | 1 | 1.5 | 20.5 | 0.01 |
| IH-LR-WC-DWRCZP-M4-2 | M4 (3 mm) | 38 | 15 | 6.5 | 10 | 1.5 | 1.5 | 20.5 | 0.015 |
| IH-LR-WC-DWRCZP-M5 | M5 (4 mm) | 47 | 18 | 7.5 | 12 | 1.5 | 1.5 | 25 | 0.025 |
| IH-LR-WC-DWRCZP-M5-2 | M5 (5 mm) | 51 | 20 | 8.5 | 14 | 1.5 | 1.5 | 27 | 0.035 |
| IH-LR-WC-DWRCZP-M6 | M6 (6 mm) | 63 | 23 | 10 | 17 | 1.5 | 2 | 33 | 0.05 |
| IH-LR-WC-DWRCZP-M8 | M8 (8 mm) | 76 | 30 | 14 | 22 | 2 | 2 | 42 | 0.1 |
| IH-LR-WC-DWRCZP-M10 | M10 (10 mm) | 88 | 34 | 16 | 25 | 3 | — | 46 | 0.18 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. I — Dimension I on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the duplex wire rope clip, zinc plated come in?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
Engineers viewing this also looked at
Drop Forged Fist Grip Wire Rope Clip, Hot-Dip Galvanized
Japanese Type Wire Rope Cable Grip
Malleable Wire Rope Clip — US Type, Zinc Plated
Stainless Steel Drop Forged Wire Rope Clip — US Type
Stainless Steel Duplex Wire Rope Clip
Stainless Steel Malleable Wire Rope Clip — US Type
Stainless Steel Simplex Wire Rope Clip
