Stainless Steel Duplex Wire Rope Clip
Stainless Steel Duplex Wire Rope Clip, in 9 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Duplex Wire Rope Clip
- Material
- Stainless steel 304 or 316 (A2 or A4)
- Finish
- Polished
Product description
Stainless Steel Duplex Wire Rope Clip for tension, lashing and fixing duty. Stainless steel 304 or 316 (A2 or A4), polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
9 sizes. Available as: standard, kj type. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Stamped.
Choosing a size
Drop-forged clips are the ones used on lifting terminations; malleable clips are for guy lines and non-lifting duty. Fit the saddle on the live end, use the number of clips the maker specifies for the rope size, and re-torque after the first load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Duplex Wire Rope Clip |
| Sizes | 9 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 (A2 or A4) |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Type | Rope size | A (mm) | B (mm) | C (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-WC-SSDWRC-M4-S | M4 | Standard | 2 mm | — | — | — | 33 | — |
| IH-LR-WC-SSDWRC-M4-S-2 | M4 | Standard | 3 mm | — | — | — | 38 | — |
| IH-LR-WC-SSDWRC-M5-S | M5 | Standard | 4 mm | — | — | — | 43 | — |
| IH-LR-WC-SSDWRC-M5-S-2 | M5 | Standard | 5 mm | — | — | — | 51 | — |
| IH-LR-WC-SSDWRC-M6-S | M6 | Standard | 6 mm | — | — | — | 63 | — |
| IH-LR-WC-SSDWRC-M8-S | M8 | Standard | 8 mm | — | — | — | 78 | — |
| IH-LR-WC-SSDWRC-M10-S | M10 | Standard | 10 mm | — | — | — | 95 | — |
| IH-LR-WC-SSDWRC-32MM-KT | 32 mm | Kj type | — | 32 | 13 | 8 | — | 0.015 |
| IH-LR-WC-SSDWRC-38MM-KT | 38 mm | Kj type | — | 38 | 15 | 10 | — | 0.018 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Rope size — Rope diameter the sheave is made for. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel duplex wire rope clip come in?▾
Can it be used for lifting?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
Engineers viewing this also looked at
Stainless Steel Malleable Wire Rope Clip — US Type
Stainless Steel Simplex Wire Rope Clip
Stainless Steel Wire Rope Clip — DIN 1142 / EN 13411-5
Stainless Steel Wire Rope Clip — DIN 741
Stainless Steel Wire Rope Clip — JIS Type
Simplex Wire Rope Clip, Zinc Plated
Wire Rope Clip, Type A — Yellow Chromated
