Skip to content

Lifting & Rigging

801 SKUs

Showing 49–96 of 801 SKUs

Category image · Lifting & Rigging

Stainless Steel Wire Rope 6x19 — 6.00–32.00 mm

Stainless steel 304 or 3166.00 mm to 32.00 mm
Inquire
Stainless Steel Wire Eye Strap — dimension drawing

Stainless Steel Wire Eye Strap — 4–10 mm

PolishedType 316 or 304 stainless steel strap eye
Inquire
Stainless Steel Welded Eye Bolt with Nut and Washer — dimension drawing

Stainless Steel Welded Eye Bolt with Nut and Washer — 250–875 kg WLL

Stainless steel 304 or 316 welded eye bolt250 to 875 kg
Inquire
Stainless Steel Welded D Ring — dimension drawing

Stainless Steel Welded D Ring — 3–8 mm

Stainless steel 304/3163 mm to 8 mm
Inquire
Stainless Steel Unwelded Eye Bolt — dimension drawing

Stainless Steel Unwelded Eye Bolt — M5–M6

Stainless steel 304 / 316 eye boltPolished
Inquire
Stainless Steel Twist Shackle — Screw Pin — dimension drawing

Stainless Steel Twist Shackle — Screw Pin, 24–72 mm

Stainless steel 304 or 316 twist shackle24 mm to 72 mm
Inquire
Stainless Steel Turnbuckle — Korean Type, Eye and Eye — dimension drawing

Stainless Steel Turnbuckle — Korean Type, Eye and Eye, 3/16–1″

Type 316 or type 304 stainless steel3/16″ to 1″
Inquire
Stainless Steel Triangle Delta Ring — dimension drawing

Stainless Steel Triangle Delta Ring — 3–8 mm

3 mm to 8 mmStainless steel AISI304 or AISI316
Inquire
Stainless Steel Swivel Trigger Snap Hook — dimension drawing

Stainless Steel Swivel Trigger Snap Hook — 90 kg WLL

90 kgType 304 or type 316 stainless steel
Inquire
Stainless Steel Swivel Snap Shackle — dimension drawing, eye swivel

Stainless Steel Swivel Snap Shackle — 450–950 kg WLL

PolishedStainless steel 304 or 316 eye swivel snap shackle
Inquire
Stainless Steel Swivel Eye Pulley Single Wheel — dimension drawing

Stainless Steel Swivel Eye Pulley Single Wheel — 15–100 mm

Polished / electrophoretic coating15 mm to 100 mm
Inquire
Stainless Steel Swivel Eye Bull Snap Hook — dimension drawing

Stainless Steel Swivel Eye Bull Snap Hook — 300 kg WLL

Type 304 or type 316 stainless steel300 kg
Inquire
Stainless Steel Swivel — Bow Type — dimension drawing

Stainless Steel Swivel — Bow Type, 1.6–4 t WLL

Stainless steel type 304/3161.6 to 4 t
Inquire
Stainless Steel Swage Toggle Terminal — dimension drawing

Stainless Steel Swage Toggle Terminal — 3–10 mm

Type 304 or type 316 stainless steel3 mm to 10 mm
Inquire

Questions we get asked

About this range

01What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
02Can Grade 30, 43 or 70 chain be used for lifting?
No. Proof coil (Grade 30), high test (Grade 43) and transport (Grade 70) chain are made for tie-down, towing and general duty. Overhead lifting with chain calls for alloy chain — Grade 80 or Grade 100 — with fittings of the same grade.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04How do I read an Indus lifting part number?
IH-LR, then the family code, then the size. Inch sizes are written in hundredths of an inch (075 is 3/4″, 025X200 is 1/4″ × 2″), metric sizes in millimetres (10MM, M16), and capacities in tonnes (0T5 is 0.5 t). A trailing -C or -A marks the carbon-steel and alloy-steel versions of the same hook or link.
05How often must lifting equipment be thoroughly examined in the UAE?
It depends on the emirate and on whether the item is lifting equipment or a lifting accessory. In Abu Dhabi, Code of Practice 34.0 requires a thorough examination of lifting equipment every 12 months, and of lifting accessories and equipment for lifting people every 6 months, by a QCC-approved third party. In Dubai, Municipality guideline GU48 requires certification every 12 months by an EIAC-accredited third party, and EIAC's own requirements set 6-month intervals for accessories, manual equipment and people-lifting equipment. Daily and pre-use checks by the user apply everywhere, and an accessory without a legible WLL marking comes out of service.
06How much does the sling angle reduce what each leg can carry?
The flatter the sling, the more load each leg carries. Measured from the horizontal, a leg at 90° carries its share of the load; at 60° it carries about 1.15 times that share, at 45° about 1.41 times and at 30° twice as much. Most lifting standards do not allow angles flatter than 30° from horizontal. Size every component — sling, shackle, master link and lifting point — for the tension in the worst-loaded leg, not for the weight of the load divided by the number of legs.
07Grade 80 or Grade 100 alloy chain — which should I choose?
Both are alloy lifting chain rated at a 4:1 design factor. Grade 100 carries about 25% more working load than Grade 80 of the same size, so a smaller, lighter sling does the same lift. Grade 80 is the more widely used and stocked, and manufacturers generally allow it at higher service temperatures than Grade 100 — check the derating table for hot work. Whichever grade you choose, the fittings must be rated for it: a Grade 80 fitting sets the capacity of a Grade 100 sling.
08Can I send a full rigging list for one quotation?
Yes. Send the list with the WLL, size, quantity and any certification each line needs, and we quote it line by line under IH-LR part numbers, with the manufacturer's rating against each item. Where a manufacturer does not publish a WLL for a part, or a line is ambiguous — a shackle pattern, a chain grade or a sling length — we say so on the quotation rather than guess.