Pocket Wheel for DIN 764 Chain
Pocket Wheel for DIN 764 Chain, 9 sizes, 10 × 35 mm to 23 × 80 mm chain. Made to order with Indus part numbers.
Key features
- Product type: Pocket chain wheel
- Pattern / standard: For DIN 764 round steel chain
- Size range: 10 × 35 mm to 23 × 80 mm chain
- Size range
- 10 × 35 mm to 23 × 80 mm chain
- Material
- Cast or forged steel, pockets hardened
- Finish
- Painted
Product description
Pocket wheel that drives DIN 764 round steel chain through shaped pockets around its rim, made in one piece or in two halves bolted across for fitting without removing the shaft.
Sizes
9 sizes, 10 × 35 mm to 23 × 80 mm chain. Every row has its own Indus part number in the table below.
Choosing a size
Choose by chain size and pitch diameter. The Hole dia. column is the largest bore the hub takes; the bore and keyway are machined to order.
Ordering
Quote the Indus part number from the table, or send the size you need. Each consignment ships with the manufacturer's inspection certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Pocket chain wheel |
| Pattern / standard | For DIN 764 round steel chain |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 10 × 35 mm to 23 × 80 mm chain |
Construction
| Parameter | Value |
|---|---|
| Material | Cast or forged steel, pockets hardened |
| Finish | Painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's inspection certificate |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Type | Chain size | Hole dia. (mm) | Weight (kg) |
|---|---|---|---|---|---|
| IH-LR-MC-WPKT-10X35-7P | 10 × 35 mm chain, pitch Ø 157 mm | 7 pockets | 10 × 35 mm, DIN 764 | 50 | 5.2 |
| IH-LR-MC-WPKT-13X45-7P | 13 × 45 mm chain, pitch Ø 203 mm | 7 pockets | 13 × 45 mm, DIN 764 | 70 | 11.7 |
| IH-LR-MC-WPKT-13X45-9P | 13 × 45 mm chain, pitch Ø 259 mm | 9 pockets | 13 × 45 mm, DIN 764 | 100 | 18 |
| IH-LR-MC-WPKT-16X56-7P | 16 × 56 mm chain, pitch Ø 252 mm | 7 pockets | 16 × 56 mm, DIN 764 | 80 | 23 |
| IH-LR-MC-WPKT-18X63-6P | 18 × 63 mm chain, pitch Ø 244 mm | 6 pockets | 18 × 63 mm, DIN 764 | 95 | 24 |
| IH-LR-MC-WPKT-18X63-7P | 18 × 63 mm chain, pitch Ø 284 mm | 7 pockets | 18 × 63 mm, DIN 764 | 95 | 27 |
| IH-LR-MC-WPKT-18X63-9P | 18 × 63 mm chain, pitch Ø 363 mm | 9 pockets | 18 × 63 mm, DIN 764 | 130 | 58 |
| IH-LR-MC-WPKT-20X70-8P | 20 × 70 mm chain, pitch Ø 359 mm | 8 pockets | 20 × 70 mm, DIN 764 | 140 | 55 |
| IH-LR-MC-WPKT-23X80-8P | 23 × 80 mm chain, pitch Ø 411 mm | 8 pockets | 23 × 80 mm, DIN 764 | 140 | 85 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Chain size — Chain the fitting is made for. Hole dia. — Diameter of the fixing hole. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the pocket wheel for DIN 764 chain come in?▾
What do I need to send to order a chain wheel?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Segmented Plain Wheel for Bucket Elevator Chain
Segmented Plain Rim Wheel for Bucket Elevator Chain
Toothed Wheel for DIN 764 Chain
Long Link Monorail Suspension Chain — DIN 20637
Round Link Mining Chain — DIN 22252
Open Connecting Link for Mining Chain — DIN 22253
Flat Link Mining Chain — DIN 22255
