Skip to content

Lifting & Rigging

801 SKUs

Showing 145–192 of 801 SKUs

Stainless Steel Fixed Eye Boat Snap — dimension drawing

Stainless Steel Fixed Eye Boat Snap — 40–113 kg WLL

40 to 113 kgType 304 or type 316 stainless steel
Inquire
Stainless steel eye grab hook, 316 marked

Stainless Steel Eye Grab Hook — 1,250–3,600 lbs WLL

Stainless steel 304 or 3161/4″ to 1/2″
Inquire
Stainless Steel Drop Forged Turnbuckle — US Type — dimension drawing, eye and eye

Stainless Steel Drop Forged Turnbuckle — US Type, 500–75,000 lbs WLL

Stainless steel 304 or 316 turnbuckle500 to 75,000 lbs
Inquire
Stainless Steel Double Wheel Swivel Pulley Block — dimension drawing

Stainless Steel Double Wheel Swivel Pulley Block — 25–50 mm

Polished / electrophoretic coating25 mm to 50 mm
Inquire
Heap of polished stainless steel DIN 766 short link chain

Stainless Steel DIN 766 Short Link Chain — 2–32 mm

Polished / electrophoretic coating2 mm to 32 mm
Inquire
Coil of stainless steel DIN 766 calibrated chain with shackles on each end

Stainless Steel DIN 766 Calibrated Chain — 5–13 mm

Stainless steel (AISI 304 / AISI 316)Polished / electrophoretic coating
Inquire
Stainless steel DIN 764 medium link chain, close-up of polished links

Stainless Steel DIN 764 Medium Link Chain — 4–20 mm

Stainless steel AISI304 or AISI3164 mm to 20 mm
Inquire
Stainless Steel DIN 582 Eye Nut — UNC Thread — dimension drawing

Stainless Steel DIN 582 Eye Nut — UNC Thread, 3/16–1-7/16″

Type 304 or 316 stainless steel3/16″ to 1-7/16″
Inquire
Stainless Steel DIN 1480 Turnbuckle — dimension drawing, eye and eye

Stainless Steel DIN 1480 Turnbuckle — 40–2,750 kg WLL

M5 to M20Type 316 or 304 stainless steel turnbuckle
Inquire
Stainless Steel Diamond Pad Eye with Ring — dimension drawing

Stainless Steel Diamond Pad Eye with Ring — 5–12 mm

PolishedStainless steel (AISI 304 / AISI316)
Inquire
Stainless Steel Diamond Pad Eye — dimension drawing

Stainless Steel Diamond Pad Eye — 5–12 mm

Stainless steel (AISI 304 / AISI316)Polished
Inquire
Stainless Steel D Shackle — Bolt Pin, Oversized Pin — dimension drawing

Stainless Steel D Shackle — Bolt Pin, Oversized Pin, 18.03–100.1 mm

Polished / electrophoretic coatingStainless steel AISI 304/316 chain shackle
Inquire
Category image · Lifting & Rigging

Stainless Steel Closed Type Block — 1,400–3,000 lbs WLL

PolishedType 304 or type 316 stainless steel
Inquire
Stainless Steel Chain Swivel — G-401 Pattern — dimension drawing

Stainless Steel Chain Swivel — G-401 Pattern, 850–7,200 lbs WLL

PolishedStainless steel 304 or 316 G-401 chain swivel
Inquire
Stainless Steel Captive Pin Shackle — dimension drawing, bow

Stainless Steel Captive Pin Shackle — 4–720 mm

4 mm to 720 mmPolished / electrophoretic coating
Inquire
Stainless steel body block with fixed eye and single sheave

Stainless Steel Body Block with Eye — 2–4″

Type 304 or type 316 stainless steelPolished
Inquire
Square Eye Snap Hook — dimension drawing

Square Eye Snap Hook — 30–180 kg WLL

Type 304 or type 316 stainless steelPolished
Inquire
Category image · Lifting & Rigging

Questions we get asked

About this range

01What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
02Can Grade 30, 43 or 70 chain be used for lifting?
No. Proof coil (Grade 30), high test (Grade 43) and transport (Grade 70) chain are made for tie-down, towing and general duty. Overhead lifting with chain calls for alloy chain — Grade 80 or Grade 100 — with fittings of the same grade.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04How do I read an Indus lifting part number?
IH-LR, then the family code, then the size. Inch sizes are written in hundredths of an inch (075 is 3/4″, 025X200 is 1/4″ × 2″), metric sizes in millimetres (10MM, M16), and capacities in tonnes (0T5 is 0.5 t). A trailing -C or -A marks the carbon-steel and alloy-steel versions of the same hook or link.
05How often must lifting equipment be thoroughly examined in the UAE?
It depends on the emirate and on whether the item is lifting equipment or a lifting accessory. In Abu Dhabi, Code of Practice 34.0 requires a thorough examination of lifting equipment every 12 months, and of lifting accessories and equipment for lifting people every 6 months, by a QCC-approved third party. In Dubai, Municipality guideline GU48 requires certification every 12 months by an EIAC-accredited third party, and EIAC's own requirements set 6-month intervals for accessories, manual equipment and people-lifting equipment. Daily and pre-use checks by the user apply everywhere, and an accessory without a legible WLL marking comes out of service.
06How much does the sling angle reduce what each leg can carry?
The flatter the sling, the more load each leg carries. Measured from the horizontal, a leg at 90° carries its share of the load; at 60° it carries about 1.15 times that share, at 45° about 1.41 times and at 30° twice as much. Most lifting standards do not allow angles flatter than 30° from horizontal. Size every component — sling, shackle, master link and lifting point — for the tension in the worst-loaded leg, not for the weight of the load divided by the number of legs.
07Grade 80 or Grade 100 alloy chain — which should I choose?
Both are alloy lifting chain rated at a 4:1 design factor. Grade 100 carries about 25% more working load than Grade 80 of the same size, so a smaller, lighter sling does the same lift. Grade 80 is the more widely used and stocked, and manufacturers generally allow it at higher service temperatures than Grade 100 — check the derating table for hot work. Whichever grade you choose, the fittings must be rated for it: a Grade 80 fitting sets the capacity of a Grade 100 sling.
08Can I send a full rigging list for one quotation?
Yes. Send the list with the WLL, size, quantity and any certification each line needs, and we quote it line by line under IH-LR part numbers, with the manufacturer's rating against each item. Where a manufacturer does not publish a WLL for a part, or a line is ambiguous — a shackle pattern, a chain grade or a sling length — we say so on the quotation rather than guess.