Skip to content

Lifting & Rigging

801 SKUs

Showing 577–624 of 801 SKUs

Cross-section diagrams of 6x7 aircraft cord with fibre core and steel strand core

Aircraft Cable — 1.58–5.40 mm

1.58 mm to 5.40 mmSteel wire
Inquire
Cross-section diagrams of 6x7 and 6x9W steel wire rope, fibre and steel cores

6x7 and 6x9 Steel Wire Rope — 2–50 mm

Bright or galvanized2 mm to 50 mm
Inquire
Cross-section diagrams of 6x37 steel wire rope with FC, IWS and IWR cores

6x37 Steel Wire Rope — 5–120 mm

Bright or galvanized5 mm to 120 mm
Inquire
Stainless Steel Tapered Terminal Cable Connector — dimension drawing

Stainless Steel Tapered Terminal Cable Connector

Type 304 or type 316 stainless steelPolished
Inquire
Stainless Steel Swageless Stud Terminal — dimension drawing

Stainless Steel Swageless Stud Terminal

PolishedType 316 stainless steel
Inquire
Stainless Steel Swage Deck Toggle Terminal for Cable Railing — dimension drawing

Stainless Steel Swage Deck Toggle Terminal for Cable Railing

PolishedStainless steel 304 or 316 swage terminal deck toggle
Inquire
Open Spelter Socket — G-416 Pattern — dimension drawing

Open Spelter Socket — G-416 Pattern

Zinc plated / hot-dip galvanizedForged steel/alloy steel
Inquire
Closed Spelter Socket — G-417 Pattern — dimension drawing

Closed Spelter Socket — G-417 Pattern

Forged steel/alloy steelZinc plated / hot-dip galvanized
Inquire
Duplex Swaging Sleeve — S-506 Pattern — dimension drawing

Duplex Swaging Sleeve — S-506 Pattern

Mild steel duplex sleeveElectro-galvanized / self colour
Inquire
Hamburger Lashing Turnbuckle — dimension drawing

Hamburger Lashing Turnbuckle

Self coloured, electro-galvanized, hot dip galvanizedMild steel
Inquire
Die-Cast Zinc Turnbuckle — dimension drawing, eye and eye

Die-Cast Zinc Turnbuckle

Zinc alloyZinc plated
Inquire
Stainless Steel Hammerlock — European Type — dimension drawing

Stainless Steel Hammerlock — European Type

Stainless steel 304 or 316 connectorPolished
Inquire
Stainless Steel Double Lock Safety Hook — dimension drawing

Stainless Steel Double Lock Safety Hook

4″Type 304 or 316 stainless steel
Inquire
Stainless Steel Carabiner Snap Hook with Screw Nut — DIN 5299 — dimension drawing

Stainless Steel Carabiner Snap Hook with Screw Nut — DIN 5299

80 to 900 lbsPolished / electrophoretic coating
Inquire
Stainless Steel Carabiner Snap Hook with Eyelet — DIN 5299 — dimension drawing

Stainless Steel Carabiner Snap Hook with Eyelet — DIN 5299

Stainless steel 304/316 carabiner snap hookPolished / electrophoretic coating
Inquire
Shackle — DIN 82101 Form A, B and C Pattern, Galvanized — dimension drawing

Shackle — DIN 82101 Form A, B and C Pattern, Galvanized

Galvanized, powder coating, or self colored
Inquire
Tubular Thimble without Gusset TG2 Painted/Galvanized — dimension drawing

Tubular Thimble without Gusset TG2 Painted/Galvanized

Carbon steelZinc plated, hot-dip galvanized, powder coated
Inquire
Synthetic Rope Thimble Galvanized — dimension drawing

Synthetic Rope Thimble Galvanized

Alloy steelZinc plated, hot-dip galvanized
Inquire
Superloop Thimble Type K15 Galvanized — dimension drawing

Superloop Thimble Type K15 Galvanized

Mild steelHot dipped galvanized / self colour
Inquire
Stainless Steel Tubular Thimble without Gusset G5 — dimension drawing

Stainless Steel Tubular Thimble without Gusset G5

PolishedType 316 or 304 stainless steel
Inquire
Stainless Steel Tubular Thimble Light Duty — dimension drawing

Stainless Steel Tubular Thimble Light Duty

PolishedType 304 / 316 stainless steel
Inquire
Stainless Steel Tubular Thimble Cast with Gusset — dimension drawing

Stainless Steel Tubular Thimble Cast with Gusset

PolishedType 316 or 304 stainless steel
Inquire
Stainless Steel Tube Thimble Heavy Duty — dimension drawing

Stainless Steel Tube Thimble Heavy Duty

Type 316 or 304 stainless steelPolished
Inquire
Manila Rope Thimble Galvanized — dimension drawing

Manila Rope Thimble Galvanized

Mild steelGalvanized to ASTM A-153 specification
Inquire

Questions we get asked

About this range

01What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
02Can Grade 30, 43 or 70 chain be used for lifting?
No. Proof coil (Grade 30), high test (Grade 43) and transport (Grade 70) chain are made for tie-down, towing and general duty. Overhead lifting with chain calls for alloy chain — Grade 80 or Grade 100 — with fittings of the same grade.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04How do I read an Indus lifting part number?
IH-LR, then the family code, then the size. Inch sizes are written in hundredths of an inch (075 is 3/4″, 025X200 is 1/4″ × 2″), metric sizes in millimetres (10MM, M16), and capacities in tonnes (0T5 is 0.5 t). A trailing -C or -A marks the carbon-steel and alloy-steel versions of the same hook or link.
05How often must lifting equipment be thoroughly examined in the UAE?
It depends on the emirate and on whether the item is lifting equipment or a lifting accessory. In Abu Dhabi, Code of Practice 34.0 requires a thorough examination of lifting equipment every 12 months, and of lifting accessories and equipment for lifting people every 6 months, by a QCC-approved third party. In Dubai, Municipality guideline GU48 requires certification every 12 months by an EIAC-accredited third party, and EIAC's own requirements set 6-month intervals for accessories, manual equipment and people-lifting equipment. Daily and pre-use checks by the user apply everywhere, and an accessory without a legible WLL marking comes out of service.
06How much does the sling angle reduce what each leg can carry?
The flatter the sling, the more load each leg carries. Measured from the horizontal, a leg at 90° carries its share of the load; at 60° it carries about 1.15 times that share, at 45° about 1.41 times and at 30° twice as much. Most lifting standards do not allow angles flatter than 30° from horizontal. Size every component — sling, shackle, master link and lifting point — for the tension in the worst-loaded leg, not for the weight of the load divided by the number of legs.
07Grade 80 or Grade 100 alloy chain — which should I choose?
Both are alloy lifting chain rated at a 4:1 design factor. Grade 100 carries about 25% more working load than Grade 80 of the same size, so a smaller, lighter sling does the same lift. Grade 80 is the more widely used and stocked, and manufacturers generally allow it at higher service temperatures than Grade 100 — check the derating table for hot work. Whichever grade you choose, the fittings must be rated for it: a Grade 80 fitting sets the capacity of a Grade 100 sling.
08Can I send a full rigging list for one quotation?
Yes. Send the list with the WLL, size, quantity and any certification each line needs, and we quote it line by line under IH-LR part numbers, with the manufacturer's rating against each item. Where a manufacturer does not publish a WLL for a part, or a line is ambiguous — a shackle pattern, a chain grade or a sling length — we say so on the quotation rather than guess.