Skip to content

Lifting & Rigging

801 SKUs

Showing 673–720 of 801 SKUs

Stainless Steel Ezi Hold Dee Ring — dimension drawing, cast

Stainless Steel Ezi Hold Dee Ring

Stainless steel 304/316Polished
Inquire
Stainless Steel Round Pad Eye with 4 Holes — dimension drawing

Stainless Steel Round Pad Eye with 4 Holes

Type 304 or 316 stainless steel9*90
Inquire
Red 322-pattern swivel hoist hook with safety latch, beside its drawing

Swivel Hoist Hook with Latch — 322 Pattern

3/4 t to 22 talloy 1 to 22 t; carbon 0.75 to 15 t
Inquire
Red 322-pattern swivel hoist hook, beside its dimension drawing

Swivel Hoist Hook — 322 Pattern

alloy 1 to 22 t; carbon 0.75 to 15 t3/4 t to 22 t
Inquire
Stainless Steel Eye Slip Hook with Latch — dimension drawing

Stainless Steel Eye Slip Hook with Latch

Type 304 or type 316 stainless steel17.8 to 53.4 kN
Inquire
Red 319-pattern shank hoist hook with safety latch, beside its drawing

Shank Hoist Hook with Latch — 319 Pattern

alloy 1 to 15 t; carbon 0.75 to 10 t3/4 t to 15 t
Inquire
Red 319-pattern shank hoist hook, beside its dimension drawing

Shank Hoist Hook — 319 Pattern

alloy 1 to 15 t; carbon 0.75 to 10 t3/4 t to 15 t
Inquire
Modular lifting beam in lifting-beam configuration with a central top shackle and bottom eyes

Multi-Configuration Modular Lifting Beam — 16 t Beam, 23 t Semi-Spreader

Modular lifting beam (multi-configuration)Steel, bolted standard sections and adaptors
Inquire
Polypropylene twisted rope, white with coils, hanks and reels

Polypropylene Twisted Rope

4–30 mmPolypropylene
Inquire
Polypropylene split-film twine balls and spools with boxed packaging

Polypropylene Split-Film Twine

380D/3 to 380D/96 (3- to 96-ply)Polypropylene
Inquire
Polypropylene multifilament twine on spools in assorted colours

Polypropylene Multifilament Twine

210D/3 to 210D/96 (3- to 96-ply)Polypropylene
Inquire
Polypropylene danline rope, twisted yellow, blue and green with coils

Polypropylene Danline Rope

4–60 mmPolypropylene
Inquire
Polyethylene twine in hanks, spools and coils, assorted colours

Polyethylene Twine

380D/3 to 380D/96 (3- to 96-ply)Polyethylene
Inquire
Polyester twine on spools and cops in white, yellow and green

Polyester Twine

Polyester210D/3 to 210D/96 (3- to 96-ply)
Inquire
Nylon twine on spools and tubes in several colours

Nylon Twine

210D/3 to 210D/96 (3- to 96-ply)Nylon (polyamide)
Inquire
Category image · Lifting & Rigging
8-strand mooring hawser samples in black, orange, white and yellow with coils

8-Strand Mooring Hawser

Polyethylene, polypropylene, polyester or nylon40–120 mm
Inquire
8-strand braided rope samples in mixed colours with reels and hanks

8-Strand Braided Rope

3–20 mmPolyethylene, polypropylene, polyester, nylon or cotton
Inquire
16-strand braided rope in assorted colours, coils and reels

16-Strand Braided Rope

Polyethylene, polypropylene, polyester, nylon or cotton3–30 mm
Inquire
Wood Lag Screw Ring Bolt — dimension drawing

Wood Lag Screw Ring Bolt

Zinc platedMild steel
Inquire
Swing Eye Bolt — DIN 444 — dimension drawing

Swing Eye Bolt — DIN 444

Zinc platedCarbon steel
Inquire
Stainless Steel Swing Eye Bolt — DIN 444 — dimension drawing

Stainless Steel Swing Eye Bolt — DIN 444

Stainless steel type 304/316Polished
Inquire
Stainless Steel Swing Eye Bolt — dimension drawing, uNC thread

Stainless Steel Swing Eye Bolt

PolishedStainless steel type 304 / 316 swing eye bolt
Inquire

Questions we get asked

About this range

01What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
02Can Grade 30, 43 or 70 chain be used for lifting?
No. Proof coil (Grade 30), high test (Grade 43) and transport (Grade 70) chain are made for tie-down, towing and general duty. Overhead lifting with chain calls for alloy chain — Grade 80 or Grade 100 — with fittings of the same grade.
03Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
04How do I read an Indus lifting part number?
IH-LR, then the family code, then the size. Inch sizes are written in hundredths of an inch (075 is 3/4″, 025X200 is 1/4″ × 2″), metric sizes in millimetres (10MM, M16), and capacities in tonnes (0T5 is 0.5 t). A trailing -C or -A marks the carbon-steel and alloy-steel versions of the same hook or link.
05How often must lifting equipment be thoroughly examined in the UAE?
It depends on the emirate and on whether the item is lifting equipment or a lifting accessory. In Abu Dhabi, Code of Practice 34.0 requires a thorough examination of lifting equipment every 12 months, and of lifting accessories and equipment for lifting people every 6 months, by a QCC-approved third party. In Dubai, Municipality guideline GU48 requires certification every 12 months by an EIAC-accredited third party, and EIAC's own requirements set 6-month intervals for accessories, manual equipment and people-lifting equipment. Daily and pre-use checks by the user apply everywhere, and an accessory without a legible WLL marking comes out of service.
06How much does the sling angle reduce what each leg can carry?
The flatter the sling, the more load each leg carries. Measured from the horizontal, a leg at 90° carries its share of the load; at 60° it carries about 1.15 times that share, at 45° about 1.41 times and at 30° twice as much. Most lifting standards do not allow angles flatter than 30° from horizontal. Size every component — sling, shackle, master link and lifting point — for the tension in the worst-loaded leg, not for the weight of the load divided by the number of legs.
07Grade 80 or Grade 100 alloy chain — which should I choose?
Both are alloy lifting chain rated at a 4:1 design factor. Grade 100 carries about 25% more working load than Grade 80 of the same size, so a smaller, lighter sling does the same lift. Grade 80 is the more widely used and stocked, and manufacturers generally allow it at higher service temperatures than Grade 100 — check the derating table for hot work. Whichever grade you choose, the fittings must be rated for it: a Grade 80 fitting sets the capacity of a Grade 100 sling.
08Can I send a full rigging list for one quotation?
Yes. Send the list with the WLL, size, quantity and any certification each line needs, and we quote it line by line under IH-LR part numbers, with the manufacturer's rating against each item. Where a manufacturer does not publish a WLL for a part, or a line is ambiguous — a shackle pattern, a chain grade or a sling length — we say so on the quotation rather than guess.