Ratchet Strap — 1″ (25 mm)

Ratchet Strap, in 3 sizes, 1″. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Ratchet Strap
- Size range: 1″
- Size range
- 1″
- Material
- Polyester
Product description
Ratchet straps and tie-downs for securing loads in transport — load-securing equipment, not lifting gear. Polyester.
Sizes and ratings
3 sizes, 1″. Minimum breaking load 800 kg. Available as: endless, double j hook, S hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Rated with a 2:1 design factor between working load limit and minimum breaking load.
Choosing a size
Choose on the lashing capacity or working load limit on the label, use enough straps for the load, and protect the webbing from edges.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Ratchet Strap |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 800 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Polyester |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-RS-RS125M-100-E
- Size
- 1″
- Type
- Endless
- Min breaking load (kg)
- 800
- Length
- —
- Ratchet / fitting
- Stainless Steel Wire Handle Ratchet
- Indus part no.IH-LR-RS-RS125M-100-DJH
- Size
- 1″
- Type
- Double j hook
- Min breaking load (kg)
- —
- Length
- —
- Ratchet / fitting
- —
- Indus part no.IH-LR-RS-RS125M-100-SH
- Size
- 1″
- Type
- S hook
- Min breaking load (kg)
- —
- Length
- 4-12m
- Ratchet / fitting
- —
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. Length — Length as published. Ratchet / fitting — Ratchet handle and end fitting, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Ratchet Strap — 1″ (25 mm) used for?▾
What sizes does the Ratchet Strap — 1″ (25 mm) come in?▾
How do I choose the right size of Ratchet Strap — 1″ (25 mm)?▾
What load rating does the Ratchet Strap — 1″ (25 mm) have?▾
What part number do I quote for the Ratchet Strap — 1″ (25 mm)?▾
How does the Ratchet Strap — 1″ (25 mm) compare with the Ratchet Strap — 2″ (50 mm)?▾
What material and finish does the Ratchet Strap — 1″ (25 mm) have?▾
What standard and certificate come with the Ratchet Strap — 1″ (25 mm)?▾
What can the Ratchet Strap — 1″ (25 mm) be connected to?▾
How should the Ratchet Strap — 1″ (25 mm) be inspected and used?▾
What are the typical applications of the Ratchet Strap — 1″ (25 mm)?▾
Does Indus stock the Ratchet Strap — 1″ (25 mm) in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog



