Ratchet Strap — 3″ (75 mm)
Ratchet Strap, in 9 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Ratchet Strap
- Material
- Polyester
Product description
Ratchet straps and tie-downs for securing loads in transport — load-securing equipment, not lifting gear. Polyester.
Sizes and ratings
9 sizes. Minimum breaking load 15,000 lbs. Available as: flat hook, grab hook anchor, chain anchor, chain extension, wire hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on the lashing capacity or working load limit on the label, use enough straps for the load, and protect the webbing from edges.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Ratchet Strap |
| Sizes | 9 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 15,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Polyester |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Type | Min breaking load (lbs) | Length | Ratchet / fitting |
|---|---|---|---|---|---|
| IH-LR-RS-RS375M-300X27FT-FH | 3″ × 27 ft | Flat hook | 15,000 | 27 ft | — |
| IH-LR-RS-RS375M-300X30FT-FH | 3″ × 30 ft | Flat hook | 15,000 | 30 ft | — |
| IH-LR-RS-RS375M-300X27FT-GHA | 3″ × 27 ft | Grab hook anchor | 15,000 | 27 ft | — |
| IH-LR-RS-RS375M-300X30FT-GHA | 3″ × 30 ft | Grab hook anchor | 15,000 | 30 ft | — |
| IH-LR-RS-RS375M-300X27FT-CA | 3″ × 27 ft | Chain anchor | 15,000 | 27 ft | — |
| IH-LR-RS-RS375M-300X30FT-CA | 3″ × 30 ft | Chain anchor | 15,000 | 30 ft | — |
| IH-LR-RS-RS375M-300-FH | 3″ | Flat hook | — | 4-12m | AL Handle/Flat Hook |
| IH-LR-RS-RS375M-300-CE | 3″ | Chain extension | — | — | AL Handle/Chain Extensions |
| IH-LR-RS-RS375M-300-WH | 3″ | Wire hook | — | 4-12m | AL Handle/Double J Hook |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. Length — Length as published. Ratchet / fitting — Ratchet handle and end fitting, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the ratchet strap come in?▾
How many ratchet straps do I need?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
