Standard Wire Rope Thimble — G-411 Pattern

Standard Wire Rope Thimble, G-411 pattern, in 11 sizes, 1/8″ to 1-1/8″-1-1/4″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Standard Wire Rope Thimble
- Pattern / standard: G-411
- Size range: 1/8″ to 1-1/8″-1-1/4″
- Size range
- 1/8″ to 1-1/8″-1-1/4″
Product description
A thimble lines a wire rope eye so it keeps its shape and does not kink or wear where it bears. This range follows the G-411 pattern, sized to interchange in an existing rigging plan.
Sizes
11 sizes, 1/8″ to 1-1/8″-1-1/4″. Every size has its own Indus part number in the table below.
Manufacturer's data
- Meets the performance requirements of US Federal Specification FF-T-276b, Type II.
- The standard choice for light-duty terminations.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Standard Wire Rope Thimble |
| Pattern / standard | G-411 |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/8″ to 1-1/8″-1-1/4″ |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
11 sizesReplaces the Crosby G-411 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
- Indus part no.IH-LR-TH-US-012
- Size
- 1/8″
- A (mm)
- 49.3
- B (mm)
- 33.3
- C (mm)
- 26.9
- D (mm)
- 17.5
- E (mm)
- 6.3
- F (mm)
- 4.1
- G (mm)
- 1.3
- H (mm)
- 3.3
- Weight (lbs/100 pcs)
- 3.5
- Indus part no.IH-LR-TH-US-019
- Size
- 3/16″
- A (mm)
- 49.3
- B (mm)
- 33.3
- C (mm)
- 26.9
- D (mm)
- 17.5
- E (mm)
- 7.9
- F (mm)
- 5.6
- G (mm)
- 1.3
- H (mm)
- 3.3
- Weight (lbs/100 pcs)
- 3.5
- Indus part no.IH-LR-TH-US-025
- Size
- 1/4″
- A (mm)
- 49.3
- B (mm)
- 33.3
- C (mm)
- 26.9
- D (mm)
- 17.5
- E (mm)
- 9.7
- F (mm)
- 7.1
- G (mm)
- 1.3
- H (mm)
- 3.3
- Weight (lbs/100 pcs)
- 3.5
- Indus part no.IH-LR-TH-US-031
- Size
- 5/16″
- A (mm)
- 54.1
- B (mm)
- 38.1
- C (mm)
- 31.8
- D (mm)
- 20.6
- E (mm)
- 11.2
- F (mm)
- 8.6
- G (mm)
- 1.3
- H (mm)
- 3.3
- Weight (lbs/100 pcs)
- 4
- Indus part no.IH-LR-TH-US-038
- Size
- 3/8″
- A (mm)
- 60.5
- B (mm)
- 41.4
- C (mm)
- 37.3
- D (mm)
- 23.9
- E (mm)
- 13.5
- F (mm)
- 10.4
- G (mm)
- 1.5
- H (mm)
- 4.1
- Weight (lbs/100 pcs)
- 6.7
- Indus part no.IH-LR-TH-US-050
- Size
- 1/2″
- A (mm)
- 69.8
- B (mm)
- 47.8
- C (mm)
- 44.4
- D (mm)
- 28.7
- E (mm)
- 17.5
- F (mm)
- 13.5
- G (mm)
- 2
- H (mm)
- 4.8
- Weight (lbs/100 pcs)
- 12.5
- Indus part no.IH-LR-TH-US-062
- Size
- 5/8″
- A (mm)
- 88.9
- B (mm)
- 57.1
- C (mm)
- 60.5
- D (mm)
- 35.1
- E (mm)
- 23.1
- F (mm)
- 16.8
- G (mm)
- 3.3
- H (mm)
- 8.6
- Weight (lbs/100 pcs)
- 34.5
- Indus part no.IH-LR-TH-US-075
- Size
- 3/4″
- A (mm)
- 95.2
- B (mm)
- 63.5
- C (mm)
- 68.3
- D (mm)
- 41.4
- E (mm)
- 27.4
- F (mm)
- 19.8
- G (mm)
- 3.6
- H (mm)
- 8.6
- Weight (lbs/100 pcs)
- 47.1
Show all 11 sizesShow fewer sizes
- Indus part no.IH-LR-TH-US-088
- Size
- 7/8″
- A (mm)
- 127
- B (mm)
- 88.9
- C (mm)
- 81
- D (mm)
- 47.8
- E (mm)
- 32.3
- F (mm)
- 23.9
- G (mm)
- 4.1
- H (mm)
- 11.2
- Weight (lbs/100 pcs)
- 84.6
- Indus part no.IH-LR-TH-US-100
- Size
- 1″
- A (mm)
- 144.5
- B (mm)
- 107.9
- C (mm)
- 95.2
- D (mm)
- 63.5
- E (mm)
- 35.3
- F (mm)
- 26.9
- G (mm)
- 4.1
- H (mm)
- 10.4
- Weight (lbs/100 pcs)
- 97.5
- Indus part no.IH-LR-TH-US-112-125
- Size
- 1-1/8″-1-1/4″
- A (mm)
- 158.8
- B (mm)
- 114.3
- C (mm)
- 109.5
- D (mm)
- 69.8
- E (mm)
- 44.4
- F (mm)
- 33.3
- G (mm)
- 5.6
- H (mm)
- 12.7
- Weight (lbs/100 pcs)
- 175
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What is the Standard Wire Rope Thimble — G-411 Pattern used for?▾
How do I read Standard Wire Rope Thimble — G-411 Pattern part numbers such as IH-LR-TH-US-012?▾
What size range does the Standard Wire Rope Thimble — G-411 Pattern cover?▾
How should I pick the size of Standard Wire Rope Thimble — G-411 Pattern for my job?▾
What load rating does the Standard Wire Rope Thimble — G-411 Pattern carry?▾
What is the Standard Wire Rope Thimble — G-411 Pattern made from and how is it finished?▾
Does the Standard Wire Rope Thimble — G-411 Pattern come with a test certificate?▾
What do I use with the Standard Wire Rope Thimble — G-411 Pattern?▾
How should the Standard Wire Rope Thimble — G-411 Pattern be fitted and inspected?▾
How does the Standard Wire Rope Thimble — G-411 Pattern compare with the Stainless Steel Wire Rope Thimble — US Standard?▾
Do you ship the Standard Wire Rope Thimble — G-411 Pattern outside the UAE?▾
Do you hold the Standard Wire Rope Thimble — G-411 Pattern for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Wire rope thimbles: standard vs extra heavy vs solid, and what the old DIN and BS numbers mean
A thimble keeps a wire rope eye from crushing and wearing where it bears on a shackle or pin. It is not rated to carry load itself — it protects the rope that does. Here is how standard, extra-heavy and solid thimbles differ, and how to match one to the rope and the fitting.
5 min read
Lifting & rigging
How to install wire rope clips: which way round, how many, and how tight
A wire rope clip termination is only as good as its installation: the saddle on the live end, the right number of clips, the right length of turnback and the right torque, re-checked after the first load. Here are the published tables for US-type and DIN 1142 clips, and the one job clips must never do.
9 min read








