Alloy Lashing Hook Grade 80 — 1 t WLL

Alloy Lashing Hook Grade 80, in 1 size, 1 t. Not for overhead lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Alloy Lashing Hook Grade 80
- Size range: 1 t
- Working load limit: 1 t
- Size range
- 1 t
- Working load limit
- 1 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Load binders tension chain tie-downs to secure a load for transport. Alloy steel, powder coated.
Sizes and ratings
1 size, 1 t. Working load limit 1 t. Minimum breaking load 4 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Drop forged.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Alloy Lashing Hook Grade 80 |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 t |
| Minimum breaking load | 4 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-LR-LB-ALHG80-1T
- Size
- 1 t
- WLL (t)
- 1
- Min breaking load (t)
- 4
- Weight (kg)
- 1.23
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is an alloy Grade 80 lashing hook and what is it used for?▾
How do I read the Indus part number on the alloy lashing hook Grade 80, for example IH-LR-LB-ALHG80-1T?▾
What are the working load limit and breaking load of the Grade 80 alloy lashing hook?▾
Which chain does the alloy Grade 80 lashing hook suit, and what are its dimensions?▾
What is the Grade 80 alloy lashing hook made of, and how is it finished?▾
Does the Grade 80 alloy lashing hook come with a test certificate?▾
What chain and load binder can I use with the 1 t alloy lashing hook?▾
Can the Grade 80 alloy lashing hook be used for overhead lifting?▾
Alloy lashing hook Grade 80 compared with the lashing type C hook with spring pin: which is right?▾
Where is a Grade 80 alloy lashing hook used on a truck or trailer?▾
How should I inspect a Grade 80 alloy lashing hook before use?▾
Do you keep the alloy lashing hook Grade 80 in stock, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








