1x19 Galvanized Aircraft Cable — 1/32–3/8″

1x19 Galvanized Aircraft Cable, in 13 sizes, 1/32″ to 3/8″. Not for overhead lifting. Indus part numbers.
Key features
- Product type: 1x19 Galvanized Aircraft Cable
- Size range: 1/32″ to 3/8″
- Size range
- 1/32″ to 3/8″
Product description
1x19 Galvanized Aircraft Cable for tension, lashing and fixing duty.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
13 sizes, 1/32″ to 3/8″. Every size has its own Indus part number in the table below.
Choosing a size
Choose on construction, core and grade: more wires per strand bend more easily over a sheave, a steel core resists crushing, and a higher grade carries more for the same diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | 1x19 Galvanized Aircraft Cable |
| Sizes | 13 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/32″ to 3/8″ |
Shipping & lead time
Sizes & part numbers
13 sizes- Indus part no.IH-LR-WR-1X19GAC-003
- Size
- 1/32″
- Min breaking load, galvanized (lbs)
- 185
- Min breaking load, 304 stainless (lbs)
- 185
- Weight (lbs/100 ft)
- 0.22
- Indus part no.IH-LR-WR-1X19GAC-005
- Size
- 3/64″
- Min breaking load, galvanized (lbs)
- 375
- Min breaking load, 304 stainless (lbs)
- 375
- Weight (lbs/100 ft)
- 0.55
- Indus part no.IH-LR-WR-1X19GAC-006
- Size
- 1/16″
- Min breaking load, galvanized (lbs)
- 500
- Min breaking load, 304 stainless (lbs)
- 500
- Weight (lbs/100 ft)
- 0.85
- Indus part no.IH-LR-WR-1X19GAC-008
- Size
- 5/64″
- Min breaking load, galvanized (lbs)
- 800
- Min breaking load, 304 stainless (lbs)
- 800
- Weight (lbs/100 ft)
- 1.4
- Indus part no.IH-LR-WR-1X19GAC-009
- Size
- 3/32″
- Min breaking load, galvanized (lbs)
- 1,200
- Min breaking load, 304 stainless (lbs)
- 1,200
- Weight (lbs/100 ft)
- 2
- Indus part no.IH-LR-WR-1X19GAC-012
- Size
- 1/8″
- Min breaking load, galvanized (lbs)
- 2,100
- Min breaking load, 304 stainless (lbs)
- 2,100
- Weight (lbs/100 ft)
- 3.5
- Indus part no.IH-LR-WR-1X19GAC-014
- Size
- 9/64″
- Min breaking load, galvanized (lbs)
- 2,820
- Min breaking load, 304 stainless (lbs)
- 2,820
- Weight (lbs/100 ft)
- 4.5
- Indus part no.IH-LR-WR-1X19GAC-016
- Size
- 5/32″
- Min breaking load, galvanized (lbs)
- 3,300
- Min breaking load, 304 stainless (lbs)
- 3,300
- Weight (lbs/100 ft)
- 5.5
Show all 13 sizesShow fewer sizes
- Indus part no.IH-LR-WR-1X19GAC-019
- Size
- 3/16″
- Min breaking load, galvanized (lbs)
- 4,700
- Min breaking load, 304 stainless (lbs)
- 4,700
- Weight (lbs/100 ft)
- 7.7
- Indus part no.IH-LR-WR-1X19GAC-025
- Size
- 1/4″
- Min breaking load, galvanized (lbs)
- 8,200
- Min breaking load, 304 stainless (lbs)
- 8,200
- Weight (lbs/100 ft)
- 13.5
- Indus part no.IH-LR-WR-1X19GAC-028
- Size
- 9/32″
- Min breaking load, galvanized (lbs)
- 10,300
- Min breaking load, 304 stainless (lbs)
- 10,300
- Weight (lbs/100 ft)
- 17
- Indus part no.IH-LR-WR-1X19GAC-031
- Size
- 5/16″
- Min breaking load, galvanized (lbs)
- 12,500
- Min breaking load, 304 stainless (lbs)
- 12,500
- Weight (lbs/100 ft)
- 21
- Indus part no.IH-LR-WR-1X19GAC-038
- Size
- 3/8″
- Min breaking load, galvanized (lbs)
- 17,500
- Min breaking load, 304 stainless (lbs)
- 17,500
- Weight (lbs/100 ft)
- 30.4
Size — Nominal size as the manufacturer states it. Min breaking load, galvanized — Minimum breaking load. A test figure — never lift to it. Min breaking load, 304 stainless — Minimum breaking load. A test figure — never lift to it. Weight — Weight per 100 feet, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the 1x19 Galvanized Aircraft Cable and where is it used?▾
How do I read 1x19 Galvanized Aircraft Cable part numbers such as IH-LR-WR-1X19GAC-003?▾
Which sizes does the 1x19 Galvanized Aircraft Cable come in?▾
How do I choose the right size of 1x19 Galvanized Aircraft Cable?▾
What is the rated capacity of the 1x19 Galvanized Aircraft Cable?▾
What material and finish does the 1x19 Galvanized Aircraft Cable have?▾
What standard and certificate apply to the 1x19 Galvanized Aircraft Cable?▾
Which parts connect to the 1x19 Galvanized Aircraft Cable?▾
How should the 1x19 Galvanized Aircraft Cable be fitted and inspected?▾
How does the 1x19 Galvanized Aircraft Cable compare with the Aircraft Cable?▾
Do you ship the 1x19 Galvanized Aircraft Cable outside the UAE?▾
Is the 1x19 Galvanized Aircraft Cable available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Wire rope construction explained: 6x19 vs 6x36 vs 6x37, and IWRC vs fibre core
A wire rope designation such as 6x36WS-IWRC 1770 B sZ tells you almost everything about how the rope will behave. The surprise is how little the construction changes its strength: at 12 mm, the common six-strand ropes break within about 12% of each other. What changes is flexibility, abrasion resistance and crush resistance.
8 min read
Rigging capacity charts
Wire rope breaking strength chart: minimum breaking load by diameter, construction and grade
Minimum breaking loads for steel wire rope from 5 mm to 60 mm in 6x19 line-contact, 6x36WS and compacted constructions, by tensile grade and core, in kN and tonnes — with a construction-by-construction comparison, weights, and how a breaking load becomes a working load.
8 min read
Rigging capacity charts
Wire rope sling capacity chart: WLL by diameter, hitch and number of legs
Working load limits for single, two-leg and four-leg wire rope slings from 6 mm to 70 mm, Flemish-eye slings by hitch to 105 mm, and soft-eye slings at 5:1 and 6:1 to 110 mm — with the mode factors, the reasons two 12 mm slings can carry different ratings, and the limits on heat and bending.
9 min read








