Stainless Steel Swage Deck Toggle Terminal for Cable Railing
Stainless Steel Swage Deck Toggle Terminal for Cable Railing, in 2 sizes, 1/8″ to 3/16″. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Swage Deck Toggle Terminal for Cable Railing
- Size range: 1/8″ to 3/16″
- Size range
- 1/8″ to 3/16″
- Material
- Stainless steel 304 or 316 swage terminal deck toggle
- Finish
- Polished
Product description
Spelter sockets and swage or swageless terminals that end a wire rope in an eye, jaw, fork or stud. Stainless steel 304 or 316 swage terminal deck toggle, polished.
Sizes
2 sizes, 1/8″ to 3/16″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping/machining/welding.
Choosing a size
Match the terminal to the rope diameter and construction, and fit it with the method it is made for — poured, pressed or hand-assembled.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swage Deck Toggle Terminal for Cable Railing |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/8″ to 3/16″ |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 swage terminal deck toggle |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
2 sizes| Indus part no. | Size | Rope size | B (mm) | H (mm) | L (mm) | L1 (mm) | L2 (mm) | T (mm) | W (mm) | D2 (mm) | D3 (mm) | D4 (mm) | D5 (mm) | L3 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-ST-SSSDTTCR-012 | 1/8″ | 1/8″ | 47.5 | 0.71 | 68.58 | 74.42 | 31.75 | 0.08 | 14.99 | 0.218 | 0.14 | 0.39 | 0.26 | 32.77 |
| IH-LR-ST-SSSDTTCR-019 | 3/16″ | 3/16″ | 47.5 | 0.71 | 66.04 | 72.39 | 39.62 | 0.08 | 14.99 | 0.295 | 0.201 | 0.39 | 0.26 | 32.77 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. B — Dimension B on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. T — Dimension T on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. D4 — Dimension D4 on the manufacturer dimension drawing. D5 — Dimension D5 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel swage deck toggle terminal for cable railing come in?▾
What is the difference between an open and a closed spelter socket?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Swage Eye Terminal
Stainless Steel Swageless Eye Terminal
Stainless Steel Swage Jaw Terminal
Stainless Steel Swage Machined Fork Terminal
Stainless Steel Swage Stud Terminal
Stainless Steel Swage Toggle Terminal
Stainless Steel Swage Toggle Terminal U.S. Type (thin-wall)
