Extra Heavy Wire Rope Thimble — G-414 Pattern, Hot-Dip Galvanized
Extra Heavy Wire Rope Thimble, G-414 pattern, in 16 sizes, 1/4″ to 2-1/4″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Extra Heavy Wire Rope Thimble
- Pattern / standard: G-414
- Size range: 1/4″ to 2-1/4″
- Size range
- 1/4″ to 2-1/4″
- Finish
- Hot-dip galvanized
Product description
A thimble lines a wire rope eye so it keeps its shape and does not kink or wear where it bears. This range follows the G-414 pattern, sized to interchange in an existing rigging plan. Hot-dip galvanized.
Sizes
16 sizes, 1/4″ to 2-1/4″. Every size has its own Indus part number in the table below.
Manufacturer's data
- Meets the performance requirements of US Federal Specification FF-T-276b, Type III.
- Also available in type 304 stainless steel for corrosive environments.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Extra Heavy Wire Rope Thimble |
| Pattern / standard | G-414 |
| Sizes | 16 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 2-1/4″ |
Construction
| Parameter | Value |
|---|---|
| Finish | Hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
16 sizesReplaces the Crosby G-414 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | H (mm) | Weight (lbs/100 pcs) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-TH-EH-025 | 1/4″ | 55.6 | 41.1 | 38.1 | 22.4 | 10.4 | 7.1 | 1.5 | 6.3 | 6.5 |
| IH-LR-TH-EH-031 | 5/16″ | 63.5 | 47.8 | 46 | 26.9 | 12.7 | 8.6 | 2 | 7.6 | 11.8 |
| IH-LR-TH-EH-038 | 3/8″ | 73.2 | 53.8 | 53.8 | 28.4 | 16 | 10.4 | 2.8 | 9.9 | 21.6 |
| IH-LR-TH-EH-044 | 7/16″ | 82.5 | 60.5 | 60.5 | 31.8 | 18.3 | 11.9 | 3 | 11.4 | 34.7 |
| IH-LR-TH-EH-050-056 | 1/2″-9/16″ | 91.9 | 69.8 | 69.8 | 38.1 | 22.6 | 15 | 3.8 | 12.2 | 51 |
| IH-LR-TH-EH-062 | 5/8″ | 107.9 | 82.5 | 79.2 | 44.4 | 25.4 | 16.8 | 4.1 | 13.5 | 75.7 |
| IH-LR-TH-EH-075 | 3/4″ | 127 | 95.2 | 96.8 | 50.8 | 31 | 19.8 | 5.6 | 17.5 | 158.1 |
| IH-LR-TH-EH-088 | 7/8″ | 139.7 | 107.9 | 107.9 | 57.1 | 35.1 | 23.9 | 5.6 | 19.8 | 177.8 |
| IH-LR-TH-EH-100 | 1″ | 155.4 | 114.3 | 120.6 | 63.5 | 39.6 | 26.9 | 6.3 | 22.4 | 313.9 |
| IH-LR-TH-EH-112-125 | 1-1/8″-1-1/4″ | 177.8 | 130 | 149.4 | 73.2 | 47.8 | 33.3 | 6.3 | 31.8 | 400 |
| IH-LR-TH-EH-125-138 | 1-1/4″-1-3/8″ | 230.6 | 165.1 | 173 | 88.9 | 57.1 | 36.6 | 9.4 | 32.8 | 886 |
| IH-LR-TH-EH-138-150 | 1-3/8″-1-1/2″ | 228.6 | 158.8 | 180.8 | 88.9 | 66.5 | 39.6 | 12.7 | 33.3 | 1,294 |
| IH-LR-TH-EH-162 | 1-5/8″ | 285.8 | 203.2 | 206.2 | 101.6 | 76.2 | 43.7 | 12.7 | 35.1 | 1,700 |
| IH-LR-TH-EH-175 | 1-3/4″ | 309.6 | 228.6 | 215.9 | 114.3 | 77.7 | 46.7 | 12.7 | 38.1 | 1,775 |
| IH-LR-TH-EH-188-200 | 1-7/8″-2″ | 384 | 304.8 | 263.7 | 152.4 | 85.9 | 53.1 | 12.7 | 42.9 | 2,775 |
| IH-LR-TH-EH-225 | 2-1/4″ | 444.5 | 355.6 | 301.8 | 177.8 | 98.6 | 60.5 | 15.7 | 46.2 | 3,950 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What sizes does the extra heavy wire rope thimble come in?▾
When do I need an extra heavy thimble?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Lifting & rigging
Wire rope thimbles: standard vs extra heavy vs solid, and what the old DIN and BS numbers mean
A thimble keeps a wire rope eye from crushing and wearing where it bears on a shackle or pin. It is not rated to carry load itself — it protects the rope that does. Here is how standard, extra-heavy and solid thimbles differ, and how to match one to the rope and the fitting.
4 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read
Lifting & rigging
How to install wire rope clips: which way round, how many, and how tight
A wire rope clip termination is only as good as its installation: the saddle on the live end, the right number of clips, the right length of turnback and the right torque, re-checked after the first load. Here are the published tables for US-type and DIN 1142 clips, and the one job clips must never do.
8 min read
Engineers viewing this also looked at
Fibre Rope Thimble — K3
Heavy Duty Stub-End Thimble — K2
Manila Rope Thimble Galvanized
Round Rope Thimble Galvanized
Synthetic Rope Thimble Galvanized
Stainless Steel Extra Heavy Wire Rope Thimble — US Type
Stainless Steel Wire Rope Thimble — US Standard
