Superloop Thimble Type K15 Galvanized
Superloop Thimble Type K15 Galvanized, in 3 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Superloop Thimble Type K15 Galvanized
- Material
- Mild steel
- Finish
- Hot dipped galvanized / self colour
Product description
Superloop Thimble Type K15 Galvanized for tension, lashing and fixing duty. Mild steel, hot dipped galvanized / self colour.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
3 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping, welding.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Superloop Thimble Type K15 Galvanized |
| Sizes | 3 |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Hot dipped galvanized / self colour |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | Rope size | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | H (mm) | I (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-TH-STK15G-200 | 2” | 2” | 490 | 250 | 280 | 178 | 26 | 56 | 20 | 96 | 20 | 18 |
| IH-LR-TH-STK15G-250 | 2-1/2” | 2-1/2” | 490 | 255 | 305 | 180 | 38 | 68 | 20 | 0.81 | 20 | 26 |
| IH-LR-TH-STK15G-300 | 3” | 3” | 540 | 300 | 300 | 180 | 42 | 85 | 20 | 120 | 20 | 33 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. I — Dimension I on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the superloop thimble type K15 galvanized come in?▾
Can it be used for lifting?▾
When do I need an extra heavy thimble?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Solid Wire Rope Thimble — DIN 3091
Stainless Steel Tubular Thimble Cast with Gusset
Stainless Steel Tube Thimble Cast without Gusset
Tube Thimble with Gusset TG2K
Tube Thimble with Gusset TTG7K
Stainless Steel Tube Thimble with Gusset G8K
Stainless Steel Tube Thimble Heavy Duty
