Manila Rope Thimble Galvanized

Manila Rope Thimble Galvanized (FF-T-276B, type 1), in 5 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Manila Rope Thimble Galvanized
- Pattern / standard: FF-T-276B, type 1
- Material
- Mild steel
- Finish
- Galvanized to ASTM A-153 specification
Product description
Manila Rope Thimble Galvanized for tension, lashing and fixing duty. Built to the FF-T-276B, type 1 pattern. Mild steel, galvanized to ASTM A-153 specification.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
5 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Manila Rope Thimble Galvanized |
| Pattern / standard | FF-T-276B, type 1 |
| Sizes | 5 |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Galvanized to ASTM A-153 specification |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-LR-TH-MRTG-3810MM
- Size
- 3/8″ / 10 mm
- Rope size
- 3/8″ / 10 mm
- Pin dia. (mm)
- 11
- A (mm)
- 13
- B (mm)
- 25
- C (mm)
- 13
- Weight (lbs)
- 3
- Indus part no.IH-LR-TH-MRTG-1213MM
- Size
- 1/2″ / 13 mm
- Rope size
- 1/2″ / 13 mm
- Pin dia. (mm)
- 17
- A (mm)
- 19
- B (mm)
- 33
- C (mm)
- 18
- Weight (lbs)
- 8
- Indus part no.IH-LR-TH-MRTG-5816MM
- Size
- 5/8″ / 16 mm
- Rope size
- 5/8″ / 16 mm
- Pin dia. (mm)
- 21
- A (mm)
- 22
- B (mm)
- 38
- C (mm)
- 19
- Weight (lbs)
- 11
- Indus part no.IH-LR-TH-MRTG-3419MM
- Size
- 3/4″ / 19 mm
- Rope size
- 3/4″ / 19 mm
- Pin dia. (mm)
- 27
- A (mm)
- 29
- B (mm)
- 46
- C (mm)
- 25
- Weight (lbs)
- 16
- Indus part no.IH-LR-TH-MRTG-7822MM
- Size
- 7/8″ / 22 mm
- Rope size
- 7/8″ / 22 mm
- Pin dia. (mm)
- 29
- A (mm)
- 30
- B (mm)
- 51
- C (mm)
- 26
- Weight (lbs)
- 21
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. Pin dia. — Diameter of the pin or bolt. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Manila Rope Thimble Galvanized and where is it used?▾
How do I read Manila Rope Thimble Galvanized part numbers such as IH-LR-TH-MRTG-3810MM?▾
Which sizes does the Manila Rope Thimble Galvanized come in?▾
How should I pick the size of Manila Rope Thimble Galvanized for my job?▾
What load rating does the Manila Rope Thimble Galvanized carry?▾
What material and finish does the Manila Rope Thimble Galvanized have?▾
Does the Manila Rope Thimble Galvanized come with a test certificate?▾
Which parts connect to the Manila Rope Thimble Galvanized?▾
How should the Manila Rope Thimble Galvanized be fitted and inspected?▾
How does the Manila Rope Thimble Galvanized compare with the Round Rope Thimble Galvanized?▾
Do you ship the Manila Rope Thimble Galvanized outside the UAE?▾
Is the Manila Rope Thimble Galvanized available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Wire rope thimbles: standard vs extra heavy vs solid, and what the old DIN and BS numbers mean
A thimble keeps a wire rope eye from crushing and wearing where it bears on a shackle or pin. It is not rated to carry load itself — it protects the rope that does. Here is how standard, extra-heavy and solid thimbles differ, and how to match one to the rope and the fitting.
5 min read
Lifting & rigging
How to install wire rope clips: which way round, how many, and how tight
A wire rope clip termination is only as good as its installation: the saddle on the live end, the right number of clips, the right length of turnback and the right torque, re-checked after the first load. Here are the published tables for US-type and DIN 1142 clips, and the one job clips must never do.
9 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








