Stainless Steel Hammerlock — European Type

Stainless Steel Hammerlock (European type), in 12 sizes. Not rated for lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Hammerlock
- Pattern / standard: European type
- Material
- Stainless steel 304 or 316 connector
- Finish
- Polished
Product description
Stainless steel link chain and connectors for marine, food and architectural duty. Built to the European pattern. Stainless steel 304 or 316 connector, polished.
Sizes and ratings
12 sizes. Minimum breaking load 2.8 to 78.75 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Choose stainless for corrosion resistance. Most stainless link chain is published with a breaking load rather than a lifting rating; for lifting, use rated alloy chain.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Hammerlock |
| Pattern / standard | European type |
| Sizes | 12 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 2.8 to 78.75 t |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 connector |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-LR-SC-SSHE-6MM
- Size
- 6 mm
- Min breaking load (t)
- 2.8
- A (mm)
- 15
- B (mm)
- 7.5
- H (mm)
- 7
- K (mm)
- 42
- L (mm)
- 58
- Weight (kg)
- 0.08
- Indus part no.IH-LR-SC-SSHE-7MM
- Size
- 7 mm
- Min breaking load (t)
- 3.75
- A (mm)
- 19
- B (mm)
- 8.5
- H (mm)
- 8.5
- K (mm)
- 54.8
- L (mm)
- 71.8
- Weight (kg)
- 0.145
- Indus part no.IH-LR-SC-SSHE-7-8MM
- Size
- 7–8 mm
- Min breaking load (t)
- 5
- A (mm)
- 18
- B (mm)
- 9.5
- H (mm)
- 8.5
- K (mm)
- 60.5
- L (mm)
- 79.5
- Weight (kg)
- 0.146
- Indus part no.IH-LR-SC-SSHE-8MM
- Size
- 8 mm
- Min breaking load (t)
- 5
- A (mm)
- 19.5
- B (mm)
- 9.5
- H (mm)
- 8.5
- K (mm)
- 60.5
- L (mm)
- 79.5
- Weight (kg)
- 0.16
- Indus part no.IH-LR-SC-SSHE-10MM
- Size
- 10 mm
- Min breaking load (t)
- 7.875
- A (mm)
- 25
- B (mm)
- 12
- H (mm)
- 11.5
- K (mm)
- 68
- L (mm)
- 90.5
- Weight (kg)
- 0.3
- Indus part no.IH-LR-SC-SSHE-13MM
- Size
- 13 mm
- Min breaking load (t)
- 13.25
- A (mm)
- 29
- B (mm)
- 15
- H (mm)
- 15
- K (mm)
- 87
- L (mm)
- 117
- Weight (kg)
- 0.65
- Indus part no.IH-LR-SC-SSHE-16MM
- Size
- 16 mm
- Min breaking load (t)
- 20
- A (mm)
- 34.5
- B (mm)
- 19.8
- H (mm)
- 19.8
- K (mm)
- 108.4
- L (mm)
- 148
- Weight (kg)
- 1.15
- Indus part no.IH-LR-SC-SSHE-18MM
- Size
- 18 mm
- Min breaking load (t)
- 25
- A (mm)
- 38
- B (mm)
- 21
- H (mm)
- 21
- K (mm)
- 112
- L (mm)
- 154
- Weight (kg)
- 1.84
Show all 12 sizesShow fewer sizes
- Indus part no.IH-LR-SC-SSHE-20MM
- Size
- 20 mm
- Min breaking load (t)
- 31.25
- A (mm)
- 41
- B (mm)
- 24
- H (mm)
- 24
- K (mm)
- 121.5
- L (mm)
- 169.5
- Weight (kg)
- 2.1
- Indus part no.IH-LR-SC-SSHE-22MM
- Size
- 22 mm
- Min breaking load (t)
- 37.5
- A (mm)
- 48
- B (mm)
- 26
- H (mm)
- 26
- K (mm)
- 141.5
- L (mm)
- 193.5
- Weight (kg)
- 2.87
- Indus part no.IH-LR-SC-SSHE-26MM
- Size
- 26 mm
- Min breaking load (t)
- 53
- A (mm)
- 57.5
- B (mm)
- 31
- H (mm)
- 30
- K (mm)
- 158
- L (mm)
- 220
- Weight (kg)
- 4.5
- Indus part no.IH-LR-SC-SSHE-32MM
- Size
- 32 mm
- Min breaking load (t)
- 78.75
- A (mm)
- 67
- B (mm)
- 38
- H (mm)
- 37
- K (mm)
- 205
- L (mm)
- 281
- Weight (kg)
- 8.21
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Stainless Steel Hammerlock — European Type used for?▾
How do I read Stainless Steel Hammerlock — European Type part numbers such as IH-LR-SC-SSHE-6MM?▾
What size range does the Stainless Steel Hammerlock — European Type cover?▾
How do I choose the right size of Stainless Steel Hammerlock — European Type?▾
What is the rated capacity of the Stainless Steel Hammerlock — European Type?▾
What material and finish does the Stainless Steel Hammerlock — European Type have?▾
What standard and certificate apply to the Stainless Steel Hammerlock — European Type?▾
Which parts connect to the Stainless Steel Hammerlock — European Type?▾
How do I install and check the Stainless Steel Hammerlock — European Type?▾
How does the Stainless Steel Hammerlock — European Type compare with the Stainless Steel Hammerlock — US Type?▾
Can you export the Stainless Steel Hammerlock — European Type from Dubai?▾
Is the Stainless Steel Hammerlock — European Type available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Stainless steel lifting chain: Grade 60 ratings, where it is worth it, and its limits
Stainless steel chain lifts where galvanised alloy chain would rust or contaminate: food plants, water treatment, marine and offshore. It carries less than Grade 80 at the same size, and chlorides in warm air can crack it. Ratings from our Grade 60 table, where stainless is worth it, which stainless chain to avoid for lifting, and how to look after it.
3 min read
Lifting & rigging
Hammerlocks, clevis fittings and connecting links: joining chain sling components
Every chain sling joins chain to a master link and a hook somewhere. A hammerlock-type connecting link does it with two halves and a pin; a clevis fitting takes the chain straight onto its pin; an eye fitting needs a link to join it. What each joint is, how they are rated, and the look-alike links that must never be used for lifting.
6 min read








