Stainless Steel Tapered Terminal Cable Connector

Stainless Steel Tapered Terminal Cable Connector, in 4 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Tapered Terminal Cable Connector
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel Tapered Terminal Cable Connector for tension, lashing and fixing duty. Type 304 or type 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
4 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Precision cast.
Choosing a size
Match the terminal to the rope diameter and construction, and fit it with the method it is made for — poured, pressed or hand-assembled.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Tapered Terminal Cable Connector |
| Sizes | 4 |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-ST-SSTTCC-M6
- Size
- M6 (M5)
- A (mm)
- 53
- B (mm)
- 11
- C (mm)
- 34
- D (mm)
- 11
- F (mm)
- 3.6
- Weight (kg)
- 0.03
- Indus part no.IH-LR-ST-SSTTCC-M6-2
- Size
- M6
- A (mm)
- 58
- B (mm)
- 12
- C (mm)
- 36
- D (mm)
- 13
- F (mm)
- 4.6
- Weight (kg)
- 0.046
- Indus part no.IH-LR-ST-SSTTCC-M8
- Size
- M8 (M6)
- A (mm)
- 65
- B (mm)
- 12
- C (mm)
- 44
- D (mm)
- 14
- F (mm)
- 5.6
- Weight (kg)
- 0.059
- Indus part no.IH-LR-ST-SSTTCC-M8-2
- Size
- M8
- A (mm)
- 73
- B (mm)
- 13
- C (mm)
- 46
- D (mm)
- 16
- F (mm)
- 6.6
- Weight (kg)
- 0.088
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Tapered Terminal Cable Connector used for?▾
How do I read Stainless Steel Tapered Terminal Cable Connector part numbers such as IH-LR-ST-SSTTCC-M6?▾
What size range does the Stainless Steel Tapered Terminal Cable Connector cover?▾
How do I choose the right size of Stainless Steel Tapered Terminal Cable Connector?▾
What is the rated capacity of the Stainless Steel Tapered Terminal Cable Connector?▾
What material and finish does the Stainless Steel Tapered Terminal Cable Connector have?▾
What standard and certificate apply to the Stainless Steel Tapered Terminal Cable Connector?▾
What do I use with the Stainless Steel Tapered Terminal Cable Connector?▾
How should the Stainless Steel Tapered Terminal Cable Connector be fitted and inspected?▾
How does the Stainless Steel Tapered Terminal Cable Connector compare with the Stainless Steel Swage Deck Toggle Terminal for Cable Railing?▾
Can you export the Stainless Steel Tapered Terminal Cable Connector from Dubai?▾
Do you hold the Stainless Steel Tapered Terminal Cable Connector for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Spelter sockets: open vs closed, zinc vs resin, and when a wedge socket will do
A properly poured spelter socket keeps 100% of the wire rope’s breaking load — the only end fitting besides a swaged socket that does. Open sockets connect with a pin through their jaws; closed sockets take a pin or shackle through a solid eye. A wedge socket is quicker to fit but keeps 80%. Here is how to choose and what a good socket needs.
5 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








