Turnbuckle — Italian Type, 50–19,800 kg WLL

Turnbuckle (Italian type), in 55 sizes, M5 to M52, WLL 50 to 19,800 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Turnbuckle
- Pattern / standard: Italian type
- Size range: M5 to M52
- Working load limit: 50 to 19,800 kg
- Size range
- M5 to M52
- Working load limit
- 50 to 19,800 kg
- Material
- Mild steel
- Finish
- Zinc plated, hot-dip galvanized
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Built to the Italian pattern. Mild steel, zinc plated, hot-dip galvanized.
Sizes and ratings
55 sizes, M5 to M52. Working load limit 50 to 19,800 kg. Available as: eye and eye, eye and hook, hook and hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Turnbuckle |
| Pattern / standard | Italian type |
| Sizes | 55 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M5 to M52 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 50 to 19,800 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Zinc plated, hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
55 sizes- Indus part no.IH-LR-TB-IT-M5-EE
- Size
- M5
- Type
- Eye and eye
- WLL (kg)
- 140
- A (mm)
- 9
- B (mm)
- 79
- C (mm)
- 59
- D (mm)
- 40
- E (mm)
- 8
- F (mm)
- 4
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 122
- L2 (mm)
- 175
- Weight (kg)
- 0.04
- Indus part no.IH-LR-TB-IT-M6-EE
- Size
- M6
- Type
- Eye and eye
- WLL (kg)
- 225
- A (mm)
- 10
- B (mm)
- 88
- C (mm)
- 74
- D (mm)
- 50
- E (mm)
- 10
- F (mm)
- 4
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 140
- L2 (mm)
- 203
- Weight (kg)
- 0.06
- Indus part no.IH-LR-TB-IT-M8-EE
- Size
- M8
- Type
- Eye and eye
- WLL (kg)
- 410
- A (mm)
- 12
- B (mm)
- 110
- C (mm)
- 80
- D (mm)
- 52
- E (mm)
- 11
- F (mm)
- 5
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 157
- L2 (mm)
- 226
- Weight (kg)
- 0.15
- Indus part no.IH-LR-TB-IT-M10-EE
- Size
- M10
- Type
- Eye and eye
- WLL (kg)
- 650
- A (mm)
- 15
- B (mm)
- 130
- C (mm)
- 97
- D (mm)
- 60
- E (mm)
- 14
- F (mm)
- 6.5
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 182
- L2 (mm)
- 260
- Weight (kg)
- 0.21
- Indus part no.IH-LR-TB-IT-M11-EE
- Size
- M11
- Type
- Eye and eye
- WLL (kg)
- 790
- A (mm)
- 17.5
- B (mm)
- 135
- C (mm)
- 102
- D (mm)
- 65
- E (mm)
- 15
- F (mm)
- 7.5
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 197
- L2 (mm)
- 285
- Weight (kg)
- 0.31
- Indus part no.IH-LR-TB-IT-M12-EE
- Size
- M12
- Type
- Eye and eye
- WLL (kg)
- 930
- A (mm)
- 18
- B (mm)
- 140
- C (mm)
- 106
- D (mm)
- 67
- E (mm)
- 17
- F (mm)
- 8
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 228
- L2 (mm)
- 297
- Weight (kg)
- 0.34
- Indus part no.IH-LR-TB-IT-M14-EE
- Size
- M14
- Type
- Eye and eye
- WLL (kg)
- 1,330
- A (mm)
- 20
- B (mm)
- 170
- C (mm)
- 126
- D (mm)
- 83
- E (mm)
- 18
- F (mm)
- 8.5
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 245
- L2 (mm)
- 365
- Weight (kg)
- 0.5
- Indus part no.IH-LR-TB-IT-M16-EE
- Size
- M16
- Type
- Eye and eye
- WLL (kg)
- 1,770
- A (mm)
- 22.5
- B (mm)
- 190
- C (mm)
- 160
- D (mm)
- 97
- E (mm)
- 23
- F (mm)
- 13
- G (mm)
- —
- H (mm)
- —
- L1 (mm)
- 280
- L2 (mm)
- 412
- Weight (kg)
- 0.93
Show all 55 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Turnbuckle — Italian Type and where is it used?▾
How do I read Turnbuckle — Italian Type part numbers such as IH-LR-TB-IT-M5-EE?▾
What size range does the Turnbuckle — Italian Type cover?▾
How do I choose the right size of Turnbuckle — Italian Type?▾
What is the rated capacity of the Turnbuckle — Italian Type?▾
What is the Turnbuckle — Italian Type made from and how is it finished?▾
What standard and certificate apply to the Turnbuckle — Italian Type?▾
What do I use with the Turnbuckle — Italian Type?▾
How do I install and check the Turnbuckle — Italian Type?▾
How does the Turnbuckle — Italian Type compare with the DIN 1480 Turnbuckle?▾
Can you export the Turnbuckle — Italian Type from Dubai?▾
Is the Turnbuckle — Italian Type available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read
Lifting & rigging
How to choose and tension a turnbuckle: end fittings, ratings, locking and inspection
A turnbuckle looks simple — two threads and a body — but the end fittings change its rating by half, an unlocked one can spin itself loose, and it is built for straight pulls only. How to choose the end fittings, body and size, read the rating, tension it properly, lock it, and know when to take it out of service.
4 min read








