Galvanized Rigging Screw, Closed Body
Galvanized Rigging Screw, Closed Body, in 38 sizes, WLL 0.1 to 11 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Galvanized Rigging Screw, Closed Body
- Working load limit: 0.1 to 11 t
- Working load limit
- 0.1 to 11 t
- Material
- Cold-drawn seamless steel tube C1020
- Finish
- Hot-dip galvanized / electro-galvanized / self colour
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Cold-drawn seamless steel tube C1020, hot-dip galvanized / electro-galvanized / self colour.
Sizes and ratings
38 sizes. Working load limit 0.1 to 11 t. Available as: eye and eye, jaw and eye, body only. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Quenched and tempered.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Galvanized Rigging Screw, Closed Body |
| Sizes | 38 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.1 to 11 t |
Construction
| Parameter | Value |
|---|---|
| Material | Cold-drawn seamless steel tube C1020 |
| Finish | Hot-dip galvanized / electro-galvanized / self colour |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
38 sizes| Indus part no. | Size | Type | WLL (t) | Body length (mm) | A (mm) | B (mm) | C (mm) | E (mm) | F (mm) | G (mm) | H (mm) | J (mm) | K (mm) | a (mm) | b (mm) | d (mm) | c (mm) | e (mm) | f (mm) | g (mm) | Z (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-TB-GRSCB-M6-EE | M6 | Eye and eye | 0.2 | — | — | — | — | — | — | — | — | — | — | 6 | 100 | 245 | 165 | 5.5 | 11 | 11 | — | 0.13 |
| IH-LR-TB-GRSCB-M8-EE | M8 | Eye and eye | 0.32 | — | — | — | — | — | — | — | — | — | — | 8 | 108 | 261 | 178 | 6 | 12 | 12 | — | 0.2 |
| IH-LR-TB-GRSCB-M10-EE | M10 | Eye and eye | 0.5 | — | — | — | — | — | — | — | — | — | — | 10 | 125 | 308 | 210 | 8.5 | 13 | 13 | — | 0.6 |
| IH-LR-TB-GRSCB-M12-EE | M12 | Eye and eye | 0.7 | — | — | — | — | — | — | — | — | — | — | 12 | 195 | 484 | 325 | 11 | 30 | 15 | — | 0.8 |
| IH-LR-TB-GRSCB-M16-EE | M16 | Eye and eye | 1.2 | — | — | — | — | — | — | — | — | — | — | 16 | 230 | 564 | 380 | 12 | 40 | 20 | — | 1.4 |
| IH-LR-TB-GRSCB-M20-EE | M20 | Eye and eye | 1.5 | — | — | — | — | — | — | — | — | — | — | 20 | 270 | 673 | 455 | 16 | 50 | 24 | — | 2.4 |
| IH-LR-TB-GRSCB-M22-EE | M22 | Eye and eye | 2.2 | — | — | — | — | — | — | — | — | — | — | 22 | 295 | 736 | 495 | 16 | 50 | 24 | — | 3 |
| IH-LR-TB-GRSCB-M24-EE | M24 | Eye and eye | 3.2 | — | — | — | — | — | — | — | — | — | — | 24 | 325 | 806 | 545 | 19 | 56 | 28 | — | 4 |
| IH-LR-TB-GRSCB-M28-EE | M28 | Eye and eye | 4.8 | — | — | — | — | — | — | — | — | — | — | 33 | 370 | 961 | 665 | 29 | 70 | 35 | — | 9 |
| IH-LR-TB-GRSCB-M32-EE | M32 | Eye and eye | 6 | — | — | — | — | — | — | — | — | — | — | 39 | 400 | 1,032 | 725 | 34 | 80 | 40 | — | 11.5 |
| IH-LR-TB-GRSCB-M36-EE | M36 | Eye and eye | 8.5 | — | — | — | — | — | — | — | — | — | — | 45 | 400 | 1,050 | 760 | 30 | 90 | 45 | — | 20.8 |
| IH-LR-TB-GRSCB-M38-EE | M38 | Eye and eye | 11 | — | — | — | — | — | — | — | — | — | — | 48 | 400 | 1,110 | 820 | 35 | 100 | 45 | — | 24 |
| IH-LR-TB-GRSCB-M6-JE | M6 (6 mm) | Jaw and eye | 0.1 | — | — | 102 | — | 15 | 15 | 8 | 6 | 7 | 5 | — | — | — | — | — | — | — | 3 | 0.11 |
| IH-LR-TB-GRSCB-M8-JE | M8 (8 mm) | Jaw and eye | 0.15 | — | — | 110 | — | 19 | 16 | 10 | 7 | 9 | 6 | — | — | — | — | — | — | — | 4 | 0.23 |
| IH-LR-TB-GRSCB-M10-JE | M10 (10 mm) | Jaw and eye | 0.375 | — | — | 152 | — | 25 | 21 | 11 | 8 | 11 | 8 | — | — | — | — | — | — | — | 5 | 0.28 |
| IH-LR-TB-GRSCB-M12-JE | M12 (12 mm) | Jaw and eye | 0.5 | — | — | 175 | — | 30 | 25 | 14 | 11 | 13 | 10 | — | — | — | — | — | — | — | 6 | 0.8 |
| IH-LR-TB-GRSCB-M16-JE | M16 (16 mm) | Jaw and eye | 0.75 | — | — | 229 | — | 41 | 40 | 16 | 14 | 18 | 12 | — | — | — | — | — | — | — | 10 | 1.4 |
| IH-LR-TB-GRSCB-M20-JE | M20 (20 mm) | Jaw and eye | 1.12 | — | — | 229 | — | 51 | 45 | 22 | 16 | 20 | 16 | — | — | — | — | — | — | — | 12 | 2 |
| IH-LR-TB-GRSCB-M22-JE | M22 (22 mm) | Jaw and eye | 1.6 | — | — | 305 | — | 51 | 48 | 22 | 16 | 24 | 18 | — | — | — | — | — | — | — | 15 | 3.5 |
| IH-LR-TB-GRSCB-M24-JE | M24 (24 mm) | Jaw and eye | 2 | — | — | 325 | — | 57 | 65 | 25 | 19 | 28 | 22 | — | — | — | — | — | — | — | 16 | 4 |
| IH-LR-TB-GRSCB-M28-JE | M28 (28 mm) | Jaw and eye | 2.75 | — | — | 356 | — | 57 | 59 | 28 | 19 | 30 | 22 | — | — | — | — | — | — | — | 18 | 4.5 |
| IH-LR-TB-GRSCB-M32-JE | M32 (32 mm) | Jaw and eye | 3.75 | — | — | 381 | — | 65 | 62 | 35 | 22 | 34 | 27 | — | — | — | — | — | — | — | 20 | 6.5 |
| IH-LR-TB-GRSCB-M36-JE | M36 (36 mm) | Jaw and eye | 4.25 | — | — | 381 | — | 65 | 68 | 36 | 22 | 38 | 28 | — | — | — | — | — | — | — | 22 | 8 |
| IH-LR-TB-GRSCB-M38-JE | M38 (38 mm) | Jaw and eye | 5 | — | — | 406 | — | 74 | 74 | 38 | 25 | 42 | 33 | — | — | — | — | — | — | — | 24 | 11 |
| IH-LR-TB-GRSCB-M6-BO | M6 | Body only | 0.1 | 102 | 6 | — | 12 | — | — | 3 | — | — | — | — | — | — | — | — | — | — | — | 0.11 |
| IH-LR-TB-GRSCB-M8-BO | M8 | Body only | 0.15 | 110 | 8 | — | 15 | — | — | 4 | — | — | — | — | — | — | — | — | — | — | — | 0.23 |
| IH-LR-TB-GRSCB-M10-BO | M10 | Body only | 0.375 | 152 | 10 | — | 21 | — | — | 5 | — | — | — | — | — | — | — | — | — | — | — | 0.28 |
| IH-LR-TB-GRSCB-M12-BO | M12 | Body only | 0.5 | 175 | 12 | — | 27 | — | — | 6 | — | — | — | — | — | — | — | — | — | — | — | 0.8 |
| IH-LR-TB-GRSCB-M16-BO | M16 | Body only | 0.75 | 229 | 16 | — | 27 | — | — | 10 | — | — | — | — | — | — | — | — | — | — | — | 1.4 |
| IH-LR-TB-GRSCB-M20-BO | M20 | Body only | 1.2 | 229 | 20 | — | 33 | — | — | 12 | — | — | — | — | — | — | — | — | — | — | — | 2 |
| IH-LR-TB-GRSCB-M22-BO | M22 | Body only | 1.6 | 305 | 22 | — | 33 | — | — | 15 | — | — | — | — | — | — | — | — | — | — | — | 3.5 |
| IH-LR-TB-GRSCB-M24-BO | M24 | Body only | 2 | 325 | 24 | — | 42 | — | — | 16 | — | — | — | — | — | — | — | — | — | — | — | 4 |
| IH-LR-TB-GRSCB-M28-BO | M28 | Body only | 2.8 | 356 | 28 | — | 48 | — | — | 18 | — | — | — | — | — | — | — | — | — | — | — | 4.5 |
| IH-LR-TB-GRSCB-M32-BO | M32 | Body only | 3.75 | 381 | 32 | — | 48 | — | — | 20 | — | — | — | — | — | — | — | — | — | — | — | 6.5 |
| IH-LR-TB-GRSCB-M36-BO | M36 | Body only | 4.25 | 381 | 36 | — | 60 | — | — | 22 | — | — | — | — | — | — | — | — | — | — | — | 8 |
| IH-LR-TB-GRSCB-M38-BO | M38 | Body only | 5 | 406 | 38 | — | 60 | — | — | 24 | — | — | — | — | — | — | — | — | — | — | — | 11 |
| IH-LR-TB-GRSCB-M45-BO | M45 | Body only | 7.2 | 406 | 45 | — | 70 | — | — | 24 | — | — | — | — | — | — | — | — | — | — | — | — |
| IH-LR-TB-GRSCB-M50-BO | M50 | Body only | 10 | 406 | 50 | — | 76 | — | — | 26 | — | — | — | — | — | — | — | — | — | — | — | — |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Body length — Length of the body between the threaded ends. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. a — Dimension a on the manufacturer dimension drawing. b — Dimension b on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. c — Dimension c on the manufacturer dimension drawing. e — Dimension e on the manufacturer dimension drawing. f — Dimension f on the manufacturer dimension drawing. g — Dimension g on the manufacturer dimension drawing. Z — Dimension Z on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the galvanized rigging screw, closed body come in?▾
What is the working load limit?▾
Why do hook-end turnbuckles have a lower WLL?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Hamburger Lashing Turnbuckle
Turnbuckle — Italian Type
JIS Frame Turnbuckle, Eye and Hook
Rigging Screw, Jaw and Jaw
Stainless Steel DIN 1480 Turnbuckle
Stainless Steel Drop Forged Turnbuckle — US Type
Stainless Steel Rigging Screw, Jaw and Jaw
