DIN 1478 Turnbuckle — Galvanized
DIN 1478 Turnbuckle, in 59 sizes, WLL 75 to 16,500 kg. Not for overhead lifting. Indus part numbers.
Key features
- Product type: DIN 1478 Turnbuckle
- Pattern / standard: DIN 1478
- Working load limit: 75 to 16,500 kg
- Working load limit
- 75 to 16,500 kg
- Finish
- Zinc plated, hot-dip galvanized
Product description
DIN 1478 Turnbuckle for tension, lashing and fixing duty. Built to the DIN 1478 pattern. Zinc plated, hot-dip galvanized.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
59 sizes. Working load limit 75 to 16,500 kg. Available as: eye and eye, hook and eye, hook and hook, jaw and eye, jaw and jaw, stub ends, body only. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | DIN 1478 Turnbuckle |
| Pattern / standard | DIN 1478 |
| Sizes | 59 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 75 to 16,500 kg |
Construction
| Parameter | Value |
|---|---|
| Finish | Zinc plated, hot-dip galvanized |
Shipping & lead time
Sizes & part numbers
59 sizes| Indus part no. | Size | Type | WLL (kg) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | L (mm) | L1 (mm) | L2 (mm) | M (mm) | W (mm) | ad (mm) | d2 (mm) | d4 (mm) | L3 (mm) | L4 (mm) | l1 (mm) | l3 (mm) | l6 (mm) | m (mm) | Ø1 (mm) | Ø2 (mm) | Ø3 (mm) | Weight (kg) | Weight (kg/100 pcs) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-TB-D1478TG-M6-EE | M6 | Eye and eye | 225 | 110 | 74 | 50 | 10 | 4 | — | — | — | 150 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.16 | — |
| IH-LR-TB-D1478TG-M8-EE | M8 | Eye and eye | 410 | 110 | 80 | 52 | 11 | 5 | — | — | — | 156 | 245 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.18 | — |
| IH-LR-TB-D1478TG-M10-EE | M10 | Eye and eye | 650 | 125 | 97 | 60 | 14 | 6.5 | — | — | — | 186 | 290 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.29 | — |
| IH-LR-TB-D1478TG-M12-EE | M12 | Eye and eye | 930 | 125 | 106 | 67 | 17 | 8 | — | — | — | 196 | 301 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.45 | — |
| IH-LR-TB-D1478TG-M16-EE | M16 | Eye and eye | 1,170 | 170 | 160 | 97 | 23 | 13 | — | — | — | 294 | 435 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1.36 | — |
| IH-LR-TB-D1478TG-M20-EE | M20 | Eye and eye | 2,700 | 200 | 190 | 116 | 25 | 14 | — | — | — | 352 | 520 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 2.6 | — |
| IH-LR-TB-D1478TG-M24-EE | M24 | Eye and eye | 3,920 | 255 | 210 | 125 | 34 | 17 | — | — | — | 391 | 600 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 3.75 | — |
| IH-LR-TB-D1478TG-M30-EE | M30 | Eye and eye | 6,250 | 255 | 240 | 150 | 38 | 19.5 | — | — | — | 441 | 648 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 6.35 | — |
| IH-LR-TB-D1478TG-M36-EE | M36 | Eye and eye | 9,100 | 295 | 276 | 160 | 48 | 27 | — | — | — | 498 | 730 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 10.5 | — |
| IH-LR-TB-D1478TG-M48-EE | M48 | Eye and eye | 16,500 | 355 | 322 | 180 | 55 | 40 | — | — | — | 564 | 840 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 16.18 | — |
| IH-LR-TB-D1478TG-M6-HE | M6 | Hook and eye | 75 | 110 | 74 | 50 | 10 | 76 | 50 | 8.5 | — | 150 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.13 | — |
| IH-LR-TB-D1478TG-M8-HE | M8 | Hook and eye | 165 | 110 | 80 | 52 | 11 | 89 | 52 | 10 | — | 161 | 250 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.15 | — |
| IH-LR-TB-D1478TG-M10-HE | M10 | Hook and eye | 235 | 125 | 97 | 60 | 14 | 103 | 62 | 12 | — | 187 | 293 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.32 | — |
| IH-LR-TB-D1478TG-M12-HE | M12 | Hook and eye | 320 | 125 | 106 | 67 | 17 | 121 | 65 | 16 | — | 208 | 313 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.49 | — |
| IH-LR-TB-D1478TG-M16-HE | M16 | Hook and eye | 530 | 170 | 160 | 97 | 23 | 172 | 105 | 16.5 | — | 299 | 440 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1,080 | — |
| IH-LR-TB-D1478TG-M20-HE | M20 | Hook and eye | 730 | 200 | 190 | 116 | 25 | 185 | 110 | 17.5 | — | 341 | 509 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1,440 | — |
| IH-LR-TB-D1478TG-M24-HE | M24 | Hook and eye | 1,550 | 255 | 210 | 125 | 34 | 225 | 135 | 23 | — | 393 | 605 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 2,650 | — |
| IH-LR-TB-D1478TG-M30-HE | M30 | Hook and eye | 2,240 | 255 | 240 | 150 | 38 | 250 | 145 | 29 | — | 440 | 647 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 3,870 | — |
| IH-LR-TB-D1478TG-M36-HE | M36 | Hook and eye | 3,530 | 295 | 276 | 160 | 48 | 284 | 170 | 30 | — | 502 | 735 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 7,540 | — |
| IH-LR-TB-D1478TG-M6-HH | M6 | Hook and hook | — | — | — | — | — | — | — | — | — | 110 | 50 | — | 9.5 | — | 6 | — | 77 | 250 | — | — | — | 160 | — | — | — | 0.16 | — |
| IH-LR-TB-D1478TG-M8-HH | M8 | Hook and hook | — | — | — | — | — | — | — | — | — | 110 | 60 | — | 11 | — | 8 | — | 98 | 289 | — | — | — | 204 | — | — | — | 0.2 | — |
| IH-LR-TB-D1478TG-M10-HH | M10 | Hook and hook | — | — | — | — | — | — | — | — | — | 125 | 73 | — | 14 | — | 8 | — | 116 | 336 | — | — | — | 241 | — | — | — | 0.3 | — |
| IH-LR-TB-D1478TG-M12-HH | M12 | Hook and hook | — | — | — | — | — | — | — | — | — | 125 | 90 | — | 18 | — | 10 | — | 146 | 393 | — | — | — | 303 | — | — | — | 0.47 | — |
| IH-LR-TB-D1478TG-M16-HH | M16 | Hook and hook | — | — | — | — | — | — | — | — | — | 170 | 100 | — | 19 | — | 10 | — | 165 | 460 | — | — | — | 340 | — | — | — | 1.01 | — |
| IH-LR-TB-D1478TG-M20-HH | M20 | Hook and hook | — | — | — | — | — | — | — | — | — | 200 | 105 | — | 21 | — | 12 | — | 180 | 512 | — | — | — | 372 | — | — | — | 1.4 | — |
| IH-LR-TB-D1478TG-M24-HH | M24 | Hook and hook | — | — | — | — | — | — | — | — | — | 255 | 135 | — | 29 | — | 12 | — | 225 | 543 | — | — | — | 463 | — | — | — | 2.86 | — |
| IH-LR-TB-D1478TG-M30-HH | M30 | Hook and hook | — | — | — | — | — | — | — | — | — | 255 | 140 | — | 31 | — | 16 | — | 225 | 687 | — | — | — | 527 | — | — | — | 4.09 | — |
| IH-LR-TB-D1478TG-M36-HH | M36 | Hook and hook | — | — | — | — | — | — | — | — | — | 295 | 170 | — | 35 | — | 16 | — | 300 | 697 | — | — | — | 617 | — | — | — | 6.85 | — |
| IH-LR-TB-D1478TG-24MM-JE | 24 mm | Jaw and eye | — | 27 | — | — | — | 12 | 4 | — | 255 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 3 |
| IH-LR-TB-D1478TG-42MM-JE | 42 mm | Jaw and eye | — | 49 | — | — | — | 20 | 6 | — | 330 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 11.6 |
| IH-LR-TB-D1478TG-48MM-JE | 48 mm | Jaw and eye | — | 58 | — | — | — | 20 | 6 | — | 355 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 16 |
| IH-LR-TB-D1478TG-M6-JJ | M6 | Jaw and jaw | 230 | 8 | — | — | — | — | — | — | — | 110 | 88 | 6 | — | — | — | — | 58 | — | — | — | — | — | 15 | 11.2 | 6 | 0.15 | — |
| IH-LR-TB-D1478TG-M8-JJ | M8 | Jaw and jaw | 440 | 10 | — | — | — | — | — | — | — | 110 | 105 | 8 | — | — | — | — | 65 | — | — | — | — | — | 17 | 14 | 8 | 0.26 | — |
| IH-LR-TB-D1478TG-M10-JJ | M10 | Jaw and jaw | 440 | 12 | — | — | — | — | — | — | — | 125 | 125 | 8 | — | — | — | — | 75 | — | — | — | — | — | 21 | 16 | 8 | 0.45 | — |
| IH-LR-TB-D1478TG-M12-JJ | M12 | Jaw and jaw | 600 | 16 | — | — | — | — | — | — | — | 125 | 145 | 10 | — | — | — | — | 85 | — | — | — | — | — | 25 | 18 | 10 | 0.66 | — |
| IH-LR-TB-D1478TG-M16-JJ | M16 | Jaw and jaw | 800 | 20 | — | — | — | — | — | — | — | 170 | 170 | 12 | — | — | — | — | 100 | — | — | — | — | — | 30 | 22.8 | 10 | 1.51 | — |
| IH-LR-TB-D1478TG-M20-JJ | M20 | Jaw and jaw | 1,650 | 24 | — | — | — | — | — | — | — | 200 | 184 | 16 | — | — | — | — | 115 | — | — | — | — | — | 34 | 27 | 12 | 2.93 | — |
| IH-LR-TB-D1478TG-M24-JJ | M24 | Jaw and jaw | 2,600 | 30 | — | — | — | — | — | — | — | 255 | 214 | 20 | — | — | — | — | 130 | — | — | — | — | — | 42 | 32 | 12 | 5 | — |
| IH-LR-TB-D1478TG-M30-JJ | M30 | Jaw and jaw | 3,400 | 36 | — | — | — | — | — | — | — | 255 | 251 | 24 | — | — | — | — | 140 | — | — | — | — | — | 51 | 38 | 16 | 9.97 | — |
| IH-LR-TB-D1478TG-M36-JJ | M36 | Jaw and jaw | 4,800 | 45 | — | — | — | — | — | — | — | 295 | 300 | 28 | — | — | — | — | 170 | — | — | — | — | — | 63.5 | 50 | 16 | 14.8 | — |
| IH-LR-TB-D1478TG-M6-SE | M6 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 90 | — | 6 | — | — | 110 | 120 | 65 | — | — | — | — | 14 | — |
| IH-LR-TB-D1478TG-M8-SE | M8 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 85 | — | 8 | — | — | 110 | 120 | 65 | — | — | — | — | 18 | — |
| IH-LR-TB-D1478TG-M10-SE | M10 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 95 | — | 8 | — | — | 125 | 150 | 75 | — | — | — | — | 32 | — |
| IH-LR-TB-D1478TG-M12-SE | M12 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 90 | — | 10 | — | — | 125 | 150 | 75 | — | — | — | — | 45 | — |
| IH-LR-TB-D1478TG-M16-SE | M16 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 120 | — | 10 | — | — | 170 | 200 | 100 | — | — | — | — | 90 | — |
| IH-LR-TB-D1478TG-M20-SE | M20 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 140 | — | 12 | — | — | 200 | 220 | 120 | — | — | — | — | 150 | — |
| IH-LR-TB-D1478TG-M24-SE | M24 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 180 | — | 12 | — | — | 255 | 260 | 150 | — | — | — | — | 275 | — |
| IH-LR-TB-D1478TG-M30-SE | M30 | Stub ends | — | — | — | — | — | — | — | — | — | — | — | — | — | 160 | — | 16 | — | — | 255 | 260 | 160 | — | — | — | — | 394 | — |
| IH-LR-TB-D1478TG-M6-BO | M6 | Body only | 225 | 110 | 17.2 | 7.5 | — | 9 | 6 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.1 | — |
| IH-LR-TB-D1478TG-M8-BO | M8 | Body only | 410 | 110 | 17.2 | 10 | — | 12 | 8 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.09 | — |
| IH-LR-TB-D1478TG-M10-BO | M10 | Body only | 650 | 125 | 21.3 | 12 | — | 15 | 8 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.19 | — |
| IH-LR-TB-D1478TG-M12-BO | M12 | Body only | 930 | 125 | 25 | 15 | — | 18 | 10 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.27 | — |
| IH-LR-TB-D1478TG-M16-BO | M16 | Body only | 1,170 | 170 | 30 | 20 | — | 24 | 10 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.42 | — |
| IH-LR-TB-D1478TG-M20-BO | M20 | Body only | 2,700 | 200 | 33.7 | 24 | — | 30 | 12 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.62 | — |
| IH-LR-TB-D1478TG-M24-BO | M24 | Body only | 3,920 | 255 | 42.4 | 29 | — | 33 | 12 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1.24 | — |
| IH-LR-TB-D1478TG-M30-BO | M30 | Body only | 6,250 | 255 | 51 | 36 | — | 41 | 16 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1.47 | — |
| IH-LR-TB-D1478TG-M36-BO | M36 | Body only | 9,100 | 295 | 63.5 | 43 | — | 50 | 16 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 2.87 | — |
| IH-LR-TB-D1478TG-M42-BO | M42 | Body only | 12,500 | 330 | 70 | 51 | — | 55 | 20 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 4.2 | — |
| IH-LR-TB-D1478TG-M48-BO | M48 | Body only | 16,500 | 355 | 83 | 58 | — | 62 | 20 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 5.78 | — |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. ad — Dimension ad on the manufacturer dimension drawing. d2 — Dimension d2 on the manufacturer dimension drawing. d4 — Dimension d4 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. L4 — Dimension L4 on the manufacturer dimension drawing. l1 — Dimension l1 on the manufacturer dimension drawing. l3 — Dimension l3 on the manufacturer dimension drawing. l6 — Dimension l6 on the manufacturer dimension drawing. m — Dimension m on the manufacturer dimension drawing. Ø1 — Dimension Ø1 on the manufacturer dimension drawing. Ø2 — Dimension Ø2 on the manufacturer dimension drawing. Ø3 — Dimension Ø3 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the DIN 1478 turnbuckle come in?▾
Can it be used for lifting?▾
Why do hook-end turnbuckles have a lower WLL?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
DIN 1480 Turnbuckle
Die-Cast Zinc Turnbuckle
Galvanized Rigging Screw, Closed Body
Hamburger Lashing Turnbuckle
Turnbuckle — Italian Type
JIS Frame Turnbuckle, Eye and Hook
Rigging Screw, Jaw and Jaw
