Stainless Steel DIN 1480 Turnbuckle
Stainless Steel DIN 1480 Turnbuckle, in 21 sizes, M5 to M20, WLL 40 to 2,750 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel DIN 1480 Turnbuckle
- Pattern / standard: DIN 1480
- Size range: M5 to M20
- Working load limit: 40 to 2,750 kg
- Size range
- M5 to M20
- Working load limit
- 40 to 2,750 kg
- Material
- Type 316 or 304 stainless steel turnbuckle
- Finish
- Polished
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Made to DIN 1480. Type 316 or 304 stainless steel turnbuckle, polished.
Sizes and ratings
21 sizes, M5 to M20. Working load limit 40 to 2,750 kg. Available as: eye and eye, eye and hook, hook and hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel DIN 1480 Turnbuckle |
| Pattern / standard | DIN 1480 |
| Sizes | 21 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M5 to M20 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 40 to 2,750 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Type 316 or 304 stainless steel turnbuckle |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
21 sizes| Indus part no. | Size | Type | WLL (kg) | D (mm) | L (mm) | L1 (mm) | S (mm) |
|---|---|---|---|---|---|---|---|
| IH-LR-TB-SSD1480T-M5-EE | M5 | Eye and eye | 170 | 8 | 90 | 140 | — |
| IH-LR-TB-SSD1480T-M6-EE | M6 | Eye and eye | 375 | 10 | 110 | 170 | — |
| IH-LR-TB-SSD1480T-M8-EE | M8 | Eye and eye | 575 | 12 | 110 | 180 | — |
| IH-LR-TB-SSD1480T-M10-EE | M10 | Eye and eye | 775 | 14 | 125 | 210 | — |
| IH-LR-TB-SSD1480T-M12-EE | M12 | Eye and eye | 1,100 | 18 | 125 | 240 | — |
| IH-LR-TB-SSD1480T-M16-EE | M16 | Eye and eye | 2,020 | 22 | 170 | 320 | — |
| IH-LR-TB-SSD1480T-M20-EE | M20 | Eye and eye | 2,750 | 25 | 200 | 370 | — |
| IH-LR-TB-SSD1480T-M5-EH | M5 | Eye and hook | 40 | 8 | 90 | 140 | 7 |
| IH-LR-TB-SSD1480T-M6-EH | M6 | Eye and hook | 80 | 10 | 110 | 170 | 9 |
| IH-LR-TB-SSD1480T-M8-EH | M8 | Eye and hook | 140 | 12 | 110 | 180 | 10 |
| IH-LR-TB-SSD1480T-M10-EH | M10 | Eye and hook | 220 | 14 | 125 | 210 | 11 |
| IH-LR-TB-SSD1480T-M12-EH | M12 | Eye and hook | 300 | 18 | 125 | 240 | 14 |
| IH-LR-TB-SSD1480T-M16-EH | M16 | Eye and hook | 600 | 22 | 170 | 320 | 18 |
| IH-LR-TB-SSD1480T-M20-EH | M20 | Eye and hook | 900 | 25 | 200 | 370 | 20 |
| IH-LR-TB-SSD1480T-M5-HH | M5 | Hook and hook | 40 | — | 90 | 140 | 7 |
| IH-LR-TB-SSD1480T-M6-HH | M6 | Hook and hook | 80 | — | 110 | 170 | 9 |
| IH-LR-TB-SSD1480T-M8-HH | M8 | Hook and hook | 140 | — | 110 | 180 | 10 |
| IH-LR-TB-SSD1480T-M10-HH | M10 | Hook and hook | 220 | — | 125 | 210 | 11 |
| IH-LR-TB-SSD1480T-M12-HH | M12 | Hook and hook | 300 | — | 125 | 240 | 14 |
| IH-LR-TB-SSD1480T-M16-HH | M16 | Hook and hook | 600 | — | 170 | 320 | 18 |
| IH-LR-TB-SSD1480T-M20-HH | M20 | Hook and hook | 900 | — | 200 | 370 | 20 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel DIN 1480 turnbuckle come in?▾
What is the working load limit?▾
Why do hook-end turnbuckles have a lower WLL?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Drop Forged Turnbuckle — US Type
Stainless Steel Rigging Screw, Jaw and Jaw
Stainless Steel Rigging Screw — Swage and Fork Ends
Stainless Steel Turnbuckle — European Commercial Type
Stainless Steel Turnbuckle — Korean Type, Eye and Eye
Stainless Steel Turnbuckle — US Type
Drop Forged Turnbuckle — US Type
