DIN 1480 Turnbuckle — M6–M42

DIN 1480 Turnbuckle, in 77 sizes, M6 to M42, WLL 1.53 to 91 kN. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: DIN 1480 Turnbuckle
- Pattern / standard: DIN 1480
- Size range: M6 to M42
- Working load limit: 1.53 to 91 kN
- Size range
- M6 to M42
- Working load limit
- 1.53 to 91 kN
- Material
- Steel
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Made to DIN 1480. Steel.
Sizes and ratings
77 sizes, M6 to M42. Working load limit 1.53 to 91 kN. Minimum breaking load 1.492 to 364 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | DIN 1480 Turnbuckle |
| Pattern / standard | DIN 1480 |
| Sizes | 77 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M6 to M42 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.53 to 91 kN |
| Minimum breaking load | 1.492 to 364 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
77 sizes- Indus part no.IH-LR-TB-D1480-M6
- Size
- M6
- Type
- Hook and eye
- WLL (kN)
- 2.25
- Min breaking load (kN)
- —
- Overall length (mm)
- 180
- Body length (mm)
- 110
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 7.8
- Indus part no.IH-LR-TB-D1480-M8
- Size
- M8
- Type
- Hook and eye
- WLL (kN)
- 4.1
- Min breaking load (kN)
- —
- Overall length (mm)
- 195
- Body length (mm)
- 110
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 14.8
- Indus part no.IH-LR-TB-D1480-M10
- Size
- M10
- Type
- Hook and eye
- WLL (kN)
- 6.5
- Min breaking load (kN)
- —
- Overall length (mm)
- 230
- Body length (mm)
- 125
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 29.4
- Indus part no.IH-LR-TB-D1480-M12
- Size
- M12
- Type
- Hook and eye
- WLL (kN)
- 9.3
- Min breaking load (kN)
- —
- Overall length (mm)
- 250
- Body length (mm)
- 125
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 36.3
- Indus part no.IH-LR-TB-D1480-M16
- Size
- M16
- Type
- Hook and eye
- WLL (kN)
- 13
- Min breaking load (kN)
- —
- Overall length (mm)
- 320
- Body length (mm)
- 170
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 56
- Indus part no.IH-LR-TB-D1480-M20
- Size
- M20
- Type
- Hook and eye
- WLL (kN)
- 17.7
- Min breaking load (kN)
- —
- Overall length (mm)
- 400
- Body length (mm)
- 200
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 156
- Indus part no.IH-LR-TB-D1480-M22
- Size
- M22
- Type
- Hook and eye
- WLL (kN)
- 32
- Min breaking load (kN)
- —
- Overall length (mm)
- 428
- Body length (mm)
- 220
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 230
- Indus part no.IH-LR-TB-D1480-M24
- Size
- M24
- Type
- Hook and eye
- WLL (kN)
- 39.2
- Min breaking load (kN)
- —
- Overall length (mm)
- 490
- Body length (mm)
- 255
- Weight (kg)
- —
- Weight (kg/100 pcs)
- 325
Show all 77 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Overall length — Overall length. Body length — Length of the body between the threaded ends. Weight — Weight as the manufacturer publishes it. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the DIN 1480 Turnbuckle and where is it used?▾
How do I read DIN 1480 Turnbuckle part numbers such as IH-LR-TB-D1480-M6?▾
What size range does the DIN 1480 Turnbuckle cover?▾
How should I pick the size of DIN 1480 Turnbuckle for my job?▾
What load rating does the DIN 1480 Turnbuckle carry?▾
What is the DIN 1480 Turnbuckle made from and how is it finished?▾
Does the DIN 1480 Turnbuckle come with a test certificate?▾
What do I use with the DIN 1480 Turnbuckle?▾
How should the DIN 1480 Turnbuckle be fitted and inspected?▾
How does the DIN 1480 Turnbuckle compare with the Stainless Steel DIN 1480 Turnbuckle?▾
Can you export the DIN 1480 Turnbuckle from Dubai?▾
Is the DIN 1480 Turnbuckle available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
DIN 1480 vs DIN 1478 turnbuckles: open frame or closed body?
DIN 1480 and DIN 1478 are the two German standards behind most metric turnbuckles in the Gulf. One is a forged open frame you can see the threads through; the other a closed tube that hides them. What each standard covers, how their ratings compare size for size, how the end fittings change things, and which to choose for bracing, guying, lashing and fencing.
3 min read
Lifting & rigging
Turnbuckles for guy wires and cable bracing: building the whole assembly
Guyed masts, temporary towers, steel bracing, shade structures and facade cables all end the same way: a wire rope, a thimble, clips or a ferrule, and a turnbuckle to set the tension. How to put the assembly together so every part matches, set the tension, lock the turnbuckle and keep it there through Gulf heat and wind.
4 min read
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read








