Stainless Steel Turnbuckle — Korean Type, Eye and Eye
Stainless Steel Turnbuckle (Korean standard), in 9 sizes, 3/16″ to 1″. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Turnbuckle
- Pattern / standard: Korean standard
- Size range: 3/16″ to 1″
- Size range
- 3/16″ to 1″
- Material
- Type 316 or type 304 stainless steel
- Finish
- Polished
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Built to the Korean standard. Type 316 or type 304 stainless steel, polished.
Sizes
9 sizes, 3/16″ to 1″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Turnbuckle |
| Pattern / standard | Korean standard |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/16″ to 1″ |
Construction
| Parameter | Value |
|---|---|
| Material | Type 316 or type 304 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | A (mm) | B (mm) | D (mm) | E (mm) | F (mm) | G (mm) | H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-TB-SSTKEE-019 | 3/16″ | 4.4 | 57 | 10 | 18.8 | 40 | 60 | 70 | 0.04 |
| IH-LR-TB-SSTKEE-025 | 1/4″ | 5.3 | 70 | 10 | 20.6 | 50 | 71 | 90 | 0.063 |
| IH-LR-TB-SSTKEE-031 | 5/16″ | 7.1 | 95 | 12 | 26.5 | 64 | 91 | 120 | 0.137 |
| IH-LR-TB-SSTKEE-038 | 3/8″ | 8.9 | 121 | 18 | 35 | 83 | 120 | 150 | 0.254 |
| IH-LR-TB-SSTKEE-050 | 1/2″ | 10.8 | 169 | 20 | 41 | 105 | 146 | 200 | 0.464 |
| IH-LR-TB-SSTKEE-062 | 5/8″ | 14.6 | 210 | 25 | 54.2 | 138 | 190 | 250 | 1.041 |
| IH-LR-TB-SSTKEE-075 | 3/4″ | 18.3 | 250 | 25 | 61.6 | 165 | 230 | 300 | 1.834 |
| IH-LR-TB-SSTKEE-088 | 7/8″ | 22 | 262 | 31 | 74 | 170 | 241 | 320 | 2.87 |
| IH-LR-TB-SSTKEE-100 | 1″ | 24 | 280 | 32 | 80 | 205 | 280 | 345 | 3.92 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel turnbuckle come in?▾
Why do hook-end turnbuckles have a lower WLL?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Turnbuckle — US Type
Drop Forged Turnbuckle — US Type
Commercial Turnbuckle, Hook and Eye
Commercial Turnbuckle — Eye and Eye, Cast Steel
DIN 1478 Turnbuckle — Galvanized
DIN 1480 Turnbuckle
Die-Cast Zinc Turnbuckle
