Stainless Steel Turnbuckle — European Commercial Type, 40–2,750 kg WLL

Stainless Steel Turnbuckle (European type), in 29 sizes, M5 to M20, WLL 40 to 2,750 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Turnbuckle
- Pattern / standard: European type
- Size range: M5 to M20
- Working load limit: 40 to 2,750 kg
- Size range
- M5 to M20
- Working load limit
- 40 to 2,750 kg
- Material
- Stainless steel 316 or stainless steel 304
- Finish
- Polished
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Built to the European pattern. Stainless steel 316 or stainless steel 304, polished.
Sizes and ratings
29 sizes, M5 to M20. Working load limit 40 to 2,750 kg. Available as: eye and eye, hook and eye, hook and hook, jaw and jaw. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Turnbuckle |
| Pattern / standard | European type |
| Sizes | 29 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M5 to M20 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 40 to 2,750 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 316 or stainless steel 304 |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
29 sizes- Indus part no.IH-LR-TB-SSTEC-M5-EE
- Size
- M5
- Type
- Eye and eye
- WLL (kg)
- 170
- A (mm)
- —
- D (mm)
- 8
- H (mm)
- —
- L (mm)
- 70
- L1 (mm)
- 120
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M6-EE
- Size
- M6
- Type
- Eye and eye
- WLL (kg)
- 375
- A (mm)
- —
- D (mm)
- 10
- H (mm)
- —
- L (mm)
- 90
- L1 (mm)
- 150
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M8-EE
- Size
- M8
- Type
- Eye and eye
- WLL (kg)
- 575
- A (mm)
- —
- D (mm)
- 14
- H (mm)
- —
- L (mm)
- 120
- L1 (mm)
- 200
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M10-EE
- Size
- M10
- Type
- Eye and eye
- WLL (kg)
- 775
- A (mm)
- —
- D (mm)
- 16
- H (mm)
- —
- L (mm)
- 150
- L1 (mm)
- 240
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M12-EE
- Size
- M12
- Type
- Eye and eye
- WLL (kg)
- 1,100
- A (mm)
- —
- D (mm)
- 18
- H (mm)
- —
- L (mm)
- 200
- L1 (mm)
- 310
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M16-EE
- Size
- M16
- Type
- Eye and eye
- WLL (kg)
- 2,020
- A (mm)
- —
- D (mm)
- 25
- H (mm)
- —
- L (mm)
- 250
- L1 (mm)
- 390
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M20-EE
- Size
- M20
- Type
- Eye and eye
- WLL (kg)
- 2,750
- A (mm)
- —
- D (mm)
- 30
- H (mm)
- —
- L (mm)
- 300
- L1 (mm)
- 440
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M5-HE
- Size
- M5
- Type
- Hook and eye
- WLL (kg)
- 40
- A (mm)
- —
- D (mm)
- 8
- H (mm)
- —
- L (mm)
- 70
- L1 (mm)
- 120
- S (mm)
- 8
Show all 29 sizesShow fewer sizes
- Indus part no.IH-LR-TB-SSTEC-M6-HE
- Size
- M6
- Type
- Hook and eye
- WLL (kg)
- 80
- A (mm)
- —
- D (mm)
- 10
- H (mm)
- —
- L (mm)
- 90
- L1 (mm)
- 150
- S (mm)
- 9
- Indus part no.IH-LR-TB-SSTEC-M8-HE
- Size
- M8
- Type
- Hook and eye
- WLL (kg)
- 140
- A (mm)
- —
- D (mm)
- 14
- H (mm)
- —
- L (mm)
- 120
- L1 (mm)
- 200
- S (mm)
- 11
- Indus part no.IH-LR-TB-SSTEC-M10-HE
- Size
- M10
- Type
- Hook and eye
- WLL (kg)
- 220
- A (mm)
- —
- D (mm)
- 16
- H (mm)
- —
- L (mm)
- 150
- L1 (mm)
- 240
- S (mm)
- 12
- Indus part no.IH-LR-TB-SSTEC-M12-HE
- Size
- M12
- Type
- Hook and eye
- WLL (kg)
- 300
- A (mm)
- —
- D (mm)
- 18
- H (mm)
- —
- L (mm)
- 200
- L1 (mm)
- 310
- S (mm)
- 14
- Indus part no.IH-LR-TB-SSTEC-M16-HE
- Size
- M16
- Type
- Hook and eye
- WLL (kg)
- 600
- A (mm)
- —
- D (mm)
- 25
- H (mm)
- —
- L (mm)
- 250
- L1 (mm)
- 390
- S (mm)
- 16
- Indus part no.IH-LR-TB-SSTEC-M20-HE
- Size
- M20
- Type
- Hook and eye
- WLL (kg)
- 900
- A (mm)
- —
- D (mm)
- 30
- H (mm)
- —
- L (mm)
- 300
- L1 (mm)
- 440
- S (mm)
- 18
- Indus part no.IH-LR-TB-SSTEC-M5-HH
- Size
- M5
- Type
- Hook and hook
- WLL (kg)
- 40
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 70
- L1 (mm)
- 120
- S (mm)
- 8
- Indus part no.IH-LR-TB-SSTEC-M6-HH
- Size
- M6
- Type
- Hook and hook
- WLL (kg)
- 80
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 90
- L1 (mm)
- 150
- S (mm)
- 9
- Indus part no.IH-LR-TB-SSTEC-M8-HH
- Size
- M8
- Type
- Hook and hook
- WLL (kg)
- 140
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 120
- L1 (mm)
- 200
- S (mm)
- 11
- Indus part no.IH-LR-TB-SSTEC-M10-HH
- Size
- M10
- Type
- Hook and hook
- WLL (kg)
- 220
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 150
- L1 (mm)
- 240
- S (mm)
- 12
- Indus part no.IH-LR-TB-SSTEC-M12-HH
- Size
- M12
- Type
- Hook and hook
- WLL (kg)
- 300
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 200
- L1 (mm)
- 310
- S (mm)
- 14
- Indus part no.IH-LR-TB-SSTEC-M16-HH
- Size
- M16
- Type
- Hook and hook
- WLL (kg)
- 600
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 250
- L1 (mm)
- 390
- S (mm)
- 16
- Indus part no.IH-LR-TB-SSTEC-M20-HH
- Size
- M20
- Type
- Hook and hook
- WLL (kg)
- 900
- A (mm)
- —
- D (mm)
- —
- H (mm)
- —
- L (mm)
- 300
- L1 (mm)
- 440
- S (mm)
- 18
- Indus part no.IH-LR-TB-SSTEC-M5-JJ
- Size
- M5
- Type
- Jaw and jaw
- WLL (kg)
- 188
- A (mm)
- 6.5
- D (mm)
- 5
- H (mm)
- 10
- L (mm)
- 70
- L1 (mm)
- 120
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M6-JJ
- Size
- M6
- Type
- Jaw and jaw
- WLL (kg)
- 350
- A (mm)
- 7.5
- D (mm)
- 6
- H (mm)
- 10
- L (mm)
- 90
- L1 (mm)
- 140
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M8-JJ
- Size
- M8
- Type
- Jaw and jaw
- WLL (kg)
- 550
- A (mm)
- 11
- D (mm)
- 8
- H (mm)
- 11
- L (mm)
- 120
- L1 (mm)
- 180
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M10-JJ
- Size
- M10
- Type
- Jaw and jaw
- WLL (kg)
- 863
- A (mm)
- 12
- D (mm)
- 9
- H (mm)
- 14
- L (mm)
- 150
- L1 (mm)
- 220
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M12-JJ
- Size
- M12
- Type
- Jaw and jaw
- WLL (kg)
- 1,250
- A (mm)
- 14
- D (mm)
- 12
- H (mm)
- 20
- L (mm)
- 200
- L1 (mm)
- 300
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M14-JJ
- Size
- M14
- Type
- Jaw and jaw
- WLL (kg)
- 1,600
- A (mm)
- 15
- D (mm)
- 12
- H (mm)
- 22
- L (mm)
- 220
- L1 (mm)
- 325
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M16-JJ
- Size
- M16
- Type
- Jaw and jaw
- WLL (kg)
- 2,000
- A (mm)
- 17
- D (mm)
- 16
- H (mm)
- 26
- L (mm)
- 250
- L1 (mm)
- 375
- S (mm)
- —
- Indus part no.IH-LR-TB-SSTEC-M20-JJ
- Size
- M20
- Type
- Jaw and jaw
- WLL (kg)
- 2,620
- A (mm)
- 20
- D (mm)
- 19
- H (mm)
- 30
- L (mm)
- 300
- L1 (mm)
- 450
- S (mm)
- —
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Turnbuckle — European Commercial Type used for?▾
How do I read Stainless Steel Turnbuckle — European Commercial Type part numbers such as IH-LR-TB-SSTEC-M5-EE?▾
Which sizes does the Stainless Steel Turnbuckle — European Commercial Type come in?▾
How do I choose the right size of Stainless Steel Turnbuckle — European Commercial Type?▾
What is the rated capacity of the Stainless Steel Turnbuckle — European Commercial Type?▾
What is the Stainless Steel Turnbuckle — European Commercial Type made from and how is it finished?▾
Does the Stainless Steel Turnbuckle — European Commercial Type come with a test certificate?▾
What do I use with the Stainless Steel Turnbuckle — European Commercial Type?▾
How should the Stainless Steel Turnbuckle — European Commercial Type be fitted and inspected?▾
How does the Stainless Steel Turnbuckle — European Commercial Type compare with the Stainless Steel Turnbuckle — US Type?▾
Can you export the Stainless Steel Turnbuckle — European Commercial Type from Dubai?▾
Do you hold the Stainless Steel Turnbuckle — European Commercial Type for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
How to choose and tension a turnbuckle: end fittings, ratings, locking and inspection
A turnbuckle looks simple — two threads and a body — but the end fittings change its rating by half, an unlocked one can spin itself loose, and it is built for straight pulls only. How to choose the end fittings, body and size, read the rating, tension it properly, lock it, and know when to take it out of service.
4 min read
Lifting & rigging
DIN 1480 vs DIN 1478 turnbuckles: open frame or closed body?
DIN 1480 and DIN 1478 are the two German standards behind most metric turnbuckles in the Gulf. One is a forged open frame you can see the threads through; the other a closed tube that hides them. What each standard covers, how their ratings compare size for size, how the end fittings change things, and which to choose for bracing, guying, lashing and fencing.
3 min read
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read








