Stainless Steel Rigging Screw, Jaw and Jaw
Stainless Steel Rigging Screw, Jaw and Jaw, in 7 sizes, 5 mm to 20 mm, WLL 550 to 6,875 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Rigging Screw, Jaw and Jaw
- Size range: 5 mm to 20 mm
- Working load limit: 550 to 6,875 lbs
- Size range
- 5 mm to 20 mm
- Working load limit
- 550 to 6,875 lbs
- Material
- Stainless steel 304 or 316
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Stainless steel 304 or 316.
Sizes and ratings
7 sizes, 5 mm to 20 mm. Working load limit 550 to 6,875 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Rigging Screw, Jaw and Jaw |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 20 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 550 to 6,875 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes| Indus part no. | Size | WLL (lbs) | Body length (mm) | Weight (kg) |
|---|---|---|---|---|
| IH-LR-TB-SSJJ-5MM | 5 mm | 550 | 70 | 0.07 |
| IH-LR-TB-SSJJ-6MM | 6 mm | 825 | 80 | 0.08 |
| IH-LR-TB-SSJJ-8MM | 8 mm | 1,620 | 90 | 0.17 |
| IH-LR-TB-SSJJ-10MM | 10 mm | 2,350 | 100 | 0.26 |
| IH-LR-TB-SSJJ-12MM | 12 mm | 3,500 | 140 | 0.44 |
| IH-LR-TB-SSJJ-16MM | 16 mm | 5,250 | 200 | 1.08 |
| IH-LR-TB-SSJJ-20MM | 20 mm | 6,870 | 230 | 2 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Body length — Length of the body between the threaded ends. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel rigging screw, jaw and jaw come in?▾
What is the working load limit?▾
Why do hook-end turnbuckles have a lower WLL?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Stainless Steel Rigging Screw — Swage and Fork Ends
Stainless Steel Turnbuckle — European Commercial Type
Stainless Steel Turnbuckle — Korean Type, Eye and Eye
Stainless Steel Turnbuckle — US Type
Drop Forged Turnbuckle — US Type
Commercial Turnbuckle, Hook and Eye
Commercial Turnbuckle — Eye and Eye, Cast Steel
