Stainless Steel Turnbuckle — US Type, 1/4–1-1/2″, ASTM F1145

Stainless Steel Turnbuckle (ASTM F1145, type 1), in 94 sizes, 1/4″ to 1-1/2″. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Turnbuckle
- Pattern / standard: ASTM F1145, type 1
- Size range: 1/4″ to 1-1/2″
- Size range
- 1/4″ to 1-1/2″
- Material
- Stainless steel (AISI 304/AISI 316)
- Finish
- Polished
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Made to ASTM F1145, type 1. Stainless steel (AISI 304/AISI 316), polished.
Sizes
94 sizes, 1/4″ to 1-1/2″. Available as: eye and eye, hook and eye, hook and hook, jaw and eye, jaw and jaw, body only. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Cast / forged.
Choosing a size
Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Turnbuckle |
| Pattern / standard | ASTM F1145, type 1 |
| Sizes | 94 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 1-1/2″ |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel (AISI 304/AISI 316) |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
94 sizes- Indus part no.IH-LR-TB-SSTUS-025-EE
- Size
- 1/4″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 8.128
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 19.81
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 101.6
- L1 (mm)
- 203.2
- S (mm)
- —
- D2 (mm)
- 6.096
- Indus part no.IH-LR-TB-SSTUS-031-EE
- Size
- 5/16″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 10.92
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 23.88
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 114.3
- L1 (mm)
- 218.4
- S (mm)
- —
- D2 (mm)
- 7.62
- Indus part no.IH-LR-TB-SSTUS-038-EE
- Size
- 3/8″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 12.95
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 28.45
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 152.4
- L1 (mm)
- 277.9
- S (mm)
- —
- D2 (mm)
- 8.89
- Indus part no.IH-LR-TB-SSTUS-050-EE
- Size
- 1/2″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 18.03
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 36.58
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 152.4
- L1 (mm)
- 304.8
- S (mm)
- —
- D2 (mm)
- 11.43
- Indus part no.IH-LR-TB-SSTUS-050-EE-2
- Size
- 1/2″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 18.03
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 36.58
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 228.6
- L1 (mm)
- 381
- S (mm)
- —
- D2 (mm)
- 11.43
- Indus part no.IH-LR-TB-SSTUS-050-EE-3
- Size
- 1/2″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 18.03
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 36.58
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 304.8
- L1 (mm)
- 457.2
- S (mm)
- —
- D2 (mm)
- 11.43
- Indus part no.IH-LR-TB-SSTUS-062-EE
- Size
- 5/8″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 22.1
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 44.45
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 152.4
- L1 (mm)
- 350.5
- S (mm)
- —
- D2 (mm)
- 12.95
- Indus part no.IH-LR-TB-SSTUS-062-EE-2
- Size
- 5/8″
- Type
- Eye and eye
- A (mm)
- —
- B (mm)
- 22.1
- B1 (mm)
- —
- D (mm)
- —
- E (mm)
- 44.45
- H (mm)
- —
- H1 (mm)
- —
- L (mm)
- 228.6
- L1 (mm)
- 426.7
- S (mm)
- —
- D2 (mm)
- 12.95
Show all 94 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. B1 — Dimension B1 on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. H1 — Dimension H1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Turnbuckle — US Type and where is it used?▾
How do I read Stainless Steel Turnbuckle — US Type part numbers such as IH-LR-TB-SSTUS-025-EE?▾
What size range does the Stainless Steel Turnbuckle — US Type cover?▾
How do I choose the right size of Stainless Steel Turnbuckle — US Type?▾
What load rating does the Stainless Steel Turnbuckle — US Type carry?▾
What is the Stainless Steel Turnbuckle — US Type made from and how is it finished?▾
What standard and certificate apply to the Stainless Steel Turnbuckle — US Type?▾
What do I use with the Stainless Steel Turnbuckle — US Type?▾
How do I install and check the Stainless Steel Turnbuckle — US Type?▾
How does the Stainless Steel Turnbuckle — US Type compare with the Stainless Steel Drop Forged Turnbuckle — US Type?▾
Can you export the Stainless Steel Turnbuckle — US Type from Dubai?▾
Do you hold the Stainless Steel Turnbuckle — US Type for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
How to choose and tension a turnbuckle: end fittings, ratings, locking and inspection
A turnbuckle looks simple — two threads and a body — but the end fittings change its rating by half, an unlocked one can spin itself loose, and it is built for straight pulls only. How to choose the end fittings, body and size, read the rating, tension it properly, lock it, and know when to take it out of service.
4 min read
Lifting & rigging
DIN 1480 vs DIN 1478 turnbuckles: open frame or closed body?
DIN 1480 and DIN 1478 are the two German standards behind most metric turnbuckles in the Gulf. One is a forged open frame you can see the threads through; the other a closed tube that hides them. What each standard covers, how their ratings compare size for size, how the end fittings change things, and which to choose for bracing, guying, lashing and fencing.
3 min read
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read








